• Proceedings of the KAIS Fall Conference
• /
• 2002.11a
• /
• pp.159-162
• /
• 2002

본 논문에서는 대역확산 방식으로 제안되고 있는 CDMA 시스템의 송수신 모뎀을 FPGA를 이용하여 설계 및 검증을 수행하였다. 송신기에서는 Walsh code(N=16), PN(7 stage=127chip)code를 데이터에 곱하여서 송신하고, 수신기에서는 송신기에서 사용했던 Walsh code(N=16)와 PN code를 사용하여 역확산 후 source data를 확인하였다. 송수신기의 설계는 Xilinx사의 FPGA 디자인 툴인 Xilinx foundation3.1을 사용하여 VHDL simulation을 수행하였고, FPGA 회로설계 검증 장비인 EDA-Lab 3000 장비를 사용하여 Xilinx사의 SPARTAN2 2S100PQ208칩에 다운로드 한 후 에뮬레이션 툴 인 Design-Pro shop을 사용하여 설계된 회로의 동작을 확인하였다.

• Proceedings of the KIEE Conference
• /
• 2005.10a
• /
• pp.176-179
• /
• 2005

In this paper, we propose the new method that separate the existing common VQ code book into two parts, one is the common VQ code book which is the half of existing common VQ code book, another is the personal speaker VQ code book which accommodate the personal speaker characteristic, variation to improve the performance of the text-dependent speaker verification system using discrete HMM. We apply the propose method m this paper to the text-dependent speaker verification system using discrete HMM and have the improvement performance of about 0.24% compared to existing method

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.2
• /
• pp.482-485
• /
• 2006

다채널 시각비교 수신기(R100-40T, Euro-80)를 이용한 GPS C/A 코드 시각비교 데이터와 Ashtech Z12T 수신기를 이용한 P3 코드 시각비교 데이터를 통합 모니터링함으로서, 간편하게 시각비교 결과를 확인 할 수 있게 GUI(Graphic User Interface) 환경으로 구현하였다. 수신기들은 현재 KRISS(Korea Research Institute of Standards and Science)에서 사용 중인 위성이용 시각비교 수신기들이다. 본 시각비교 통합 모니터링 프로세스를 통해서 GPS C/A code 시각비교 데이터와 P3 code 시각비교 데이터 각각을 비교 분석함으로써 시각비교 결과의 신뢰성을 검증하는데 사용한다.

• Nuclear Engineering and Technology
• /
• v.50 no.6
• /
• pp.981-988
• /
• 2018

An experiment was performed for the OECD/NEA ROSA-2 Project with the large-scale test facility (LSTF), which simulated a steam generator tube rupture (SGTR) accident due to a double-ended guillotine break of one of steam generator (SG) U-tubes with operator recovery actions in a pressurized water reactor. The relief valve of broken SG opened three times after the start of intact SG secondary-side depressurization as the recovery action. Multi-dimensional phenomena specific to the SGTR accident appeared such as significant thermal stratification in a cold leg in broken loop especially during the operation of high-pressure injection (HPI) system. The RELAP5/MOD3.3 code overpredicted the broken SG secondary-side pressure after the start of the intact SG secondary-side depressurization, and failed to calculate the cold leg fluid temperature in broken loop. The combination of the number of the ruptured SG tubes and the HPI system operation difference was found to significantly affect the primary and SG secondary-side pressures through sensitivity analyses with the RELAP5 code.

• Earthquakes and Structures
• /
• v.1 no.2
• /
• pp.163-175
• /
• 2010

The vertical axis through the modal center of rigidity (m-CR) is used for interpreting the code torsional provisions in the design of eccentric multi-story building structures. The concept of m-CR has been demonstrated by the author in an earlier paper and the particular feature of this point is that when the vertical line of the centers of mass at the floor levels is passing through m-CR, minimum base torsion is developed. For this reason the aforesaid axis is used as reference axis for implementing the code provisions required by the equivalent static analysis. The study examines uniform mixed-bent-type multistory buildings with simple eccentricity, ranging from torsionally stiff to torsionally flexible systems. Using the results of a dynamic response spectrum analysis as a basis for comparisons, it is shown that the results of the code static design are on the safe side in torsionally stiff buildings, but unable to predict the required strength of bents on the stiff side of systems with a predominantly torsional response. Suggestions are made for improving the code provisions in such cases.

• Steel and Composite Structures
• /
• v.31 no.1
• /
• pp.85-98
• /
• 2019

Nonlinear seismic performances of code designed Perforated Steel Plate Shear Walls (P-SPSW) were studied. Three multi-storey (4-, 8-, and 12-storey) P-SPSWs were designed according to Canadian seismic provisions and their performance was evaluated using time history analysis for ground motions compatible with Vancouver response spectrum. The selected code designed P-SPSWs exhibited excellent seismic performance with high ductility and strength. The current code equation was found to provide a good estimation of the shear strength of the perforated infill plate, especially when the infill plate is yielded. The applicability of the strip model, originally proposed for solid infill plate, was also evaluated for P-SPSW and two different strip models were studied. It was observed that the strip model with strip widths equal to center to center diagonal distance between each perforation line could reasonably predict the inelastic behavior of unstiffened P-SPSWs. The strip model slightly underestimated the initial stiffness; however, the ultimate strength was predicted well. Furthermore, applicability of simple shear-flexure beam model for determination of fundamental periods of P-SPSWs was studied.

• Nuclear Engineering and Technology
• /
• v.54 no.6
• /
• pp.2262-2275
• /
• 2022

The Korea Atomic Energy Research Institute (KAERI) studied the sodium-water reaction (SWR) minimized steam generator for the safety of the sodium-cooled fast reactor (SFR), and selected the copper bonded steam generator (CBSG) as the optimal concept. This paper introduces the conceptual design of the CBSG and the development of the CBSG sizing analyzer (CBSGSA). The CBSG consists of multiple heat transfer modules with a crossflow heat transfer configuration where sodium flows horizontally and water flows vertically. The heat transfer modules are stacked along a vertical direction to achieve the targeted large heat transfer capacity. The CBSGSA code was developed for the thermal-hydraulic analysis of the CBSG in a multi-pass crossflow heat transfer configuration. Finally, we conducted a preliminary sizing and rating analysis of the CBSG for the trans-uranium (TRU) core system using the CBSGSA code proposed by KAERI.

• Proceedings of the Korean Nuclear Society Conference
• /
• 1997.10a
• /
• pp.591-598
• /
• 1997

The COBRA/RELAPS code, an integrated version of the COBRA-TF and RELAP5/MOD3 codes, has been developed for the realistic simulations of complicated, multi-dimensional, two-phase, thermal-hydraulic system transients in light water reactors. Recently, KAERA developed an unified version of the COBRA/RELAP5 code, which can run in serial mode on both workstations and personal computers. This paper provides the brief overview of the code integration scheme, the recent code modifications, the developmental assessments, and the future development plan.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.25 no.5B
• /
• pp.879-888
• /
• 2000

In this paper, the performance of IS-95B CDMA system adopting multi-code scheme for data service on the forward link is obtained by theoretical analysis and computer simulation. The wireless channel is assumed to include AWGN, MUI(Multi-User Interference), and MPI(Multi-Path Interference), and multipath Rayleigh fading modeled by TDL(Tapped Delay Line). To obtain actual performance, IS-95B system using PN codes(M-sequence) concatenated with Walsh codes is considered. The BER performance of voice/data service satisfying QoS requirement and the maximum capacity of voice users is derived in terms of various system parameters(voice activity factor, required SNR of voice/data users, the number of multi-codes, the number of voice/data users.,etc.). As a result, under the condition that the maximum allowable number of voice user is 38 in voice only system, as the number of multi-code is decreased by 1, the maximum allowable number of voice user is increased by 5% for system with 1 data user and 22.3% for system with 4 data users. Therefore, it is possible to increase maximum allowable number of users in IS-95B CDMA system by appropriate control of the number of multi-codes and required SNR according to channel environment and traffic characteristic.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.2A
• /
• pp.162-168
• /
• 2007

This paper proposes two detection algorithms for Multi-user Space Time Block Code systems. The first one is linear detection Gaussian Elimination algorithm, and then it combined with Ordered Successive Cancellation to get better performance. The comparisons between receiver and other popular receivers, including linear receivers are provided. It will be shown that the performance of Gaussian Elimination receiver is similar but more simplicity than linear detection algorithms and performance of Gaussian Elimination Ordered Successive Cancellation superior as compared to other linear detection method.