• 전력전자학회논문지
• /
• 제11권3호
• /
• pp.233-238
• /
• 2006

전력 외란을 해결하기 위해서는 전력 계통의 전원 측과 부하 측 양단에서 전력 성분의 측정이 요구된다. 본 논문은 전원 측과 부하 측 양단에서 동시에 전력 성분을 측정하고 분석할 수 있는 DSP(디지털 신호 처리 장치) 기반의 다채널(전압 8채널, 전류 10채널) 전력 성분 측정 시스템을 제안하였다. 개발된 시스템은 YOKOGAWA 2558을 이용하여 전압과 전류를 보정한 후, 전력 계통 현장에서 실험하였다.

• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.351-356
• /
• 2010

A new current-balancing multi-channel LED driver is proposed in this paper. The conventional LED driver system consists of three cascaded power conversion stages and its driver stage has the same number of expensive boost converters as those of the LED channels. On the other hand, the proposed LED driver system consists of two cascaded power stages and its driver stage requires only passive devices instead of expensive boost converters. Nevertheless, all of the currents through multi-channel LEDs can be well balanced. Therefore, it features a smaller system size, improved efficiency, and lower cost. To confirm the validity of the proposed driver, its operation and performance are verified on a prototype for a 46" LCD TV.

• 센서학회지
• /
• 제9권6호
• /
• pp.448-454
• /
• 2000

This paper describes the implementation of a multi-subject, multi-channel optical telemetry system for the short range measurement of electrocardiograms (EKGs) a system which receives command signals and transmits physiological signals to the external system using LED (Light Emitting Diode) and PD (Photodiode). This system decreases the dependency of power supply voltage to the CMOS IC chips and a new enforced synchronization technique using infrared bi-directional communication has also been proposed. The telemetry IC with the size of $5.1{\times}5.1mm^2$ has the following functions: receiving of command signal, initialization of internal state of all functional blocks, decoding of subject selection signal, time division multiplexing of 4-channel modulated physiological signals, transmission of modulated signals to external system, and auto power down control.

• 소음진동
• /
• 제9권6호
• /
• pp.1137-1144
• /
• 1999

Most of ANC(active noise control) researches are focused on adaptive algorithms, computer simulations and implementations of single-channel system in experimental environments. In this paper, a multi-channel ANC system based on DSP's was developed to obtain global attenuations over wide region and applied to the active control of the humming noise generated by a transformer. The developed ANC system including 24 microphones and 12 spearkers was applied to the real transformer noise reduction problem. Results showed that the control system could successfully control the humming noise over the region of interest.

• 한국군사과학기술학회지
• /
• 제24권1호
• /
• pp.31-40
• /
• 2021

The multi-channel video streaming system is an essential device for future ground combat vehicles. For the system, the application of digital interfaces is required instead of the direct analog method to support selectable multiple channels. However, due to the characteristics of the digital interfaces that require en/decoding and signal conversion, the system should support the ability to adapt to quality and delay requirements depending on how video data is utilized. To support addressed issue, this study designs and emulates the multi-channel compressed-video streaming system of ground combat vehicle's fire control system based on commercial standards. Using the system, this study analyzes the quality of video according to the rotational speed of the acquisition device and Glass-to-Glass (G2G) delay between video acquisition and display devices according to video compression rates. Through these experiments and analysis, this paper presents the design direction of the system having scalability on the latest technology while providing high-quality video data streaming flexibly.

• 전자공학회논문지S
• /
• 제35S권7호
• /
• pp.6-13
• /
• 1998

To constoruct a multi-channel system like Optical Frequency Division Multiplexing (OFDM) with the vast amount of transmission capability, a frequency stabilization is essential technique for getting narrower channel spacing and for minimizing fluctuation of oscillation frquency of each channel. This paper proposes a novel multi-channel optical frequency stabilization scheme that uses wavelength crossover properties of a Arrayed Waveguide Grating(AWG). The proposed scheme includes an effective control algorithm that carries out frequency stabilization of all channels through a simple control circuit, simulaneously. And also, a design method of AWG is included which has higher resolutio in consideration of system loss.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.338-351
• /
• 2013

Multiple-input multiple-output (MIMO) communication may provide high spectral efficiency through the deployment of a very large number of antenna elements at the base stations. The gains from massive MIMO communication come from the use of multi-user MIMO on the uplink and downlink, but with a large excess of antennas at the base station compared to the number of served users. Initial work on massive MIMO did not fully address several practical issues associated with its deployment. This paper considers the impact of channel aging on the performance of massive MIMO systems. The effects of channel variation are characterized as a function of different system parameters assuming a simple model for the channel time variations at the transmitter. Channel prediction is proposed to overcome channel aging effects. The analytical results on aging show how capacity is lost due to time variation in the channel. Numerical results in a multicell network show that massive MIMO works even with some channel variation and that channel prediction could partially overcome channel aging effects.

• 전력전자학회논문지
• /
• 제19권6호
• /
• pp.564-571
• /
• 2014

A single-stage current-balancing multi-channel light-emitting diode (LED) driver is proposed in this study. The conventional LED driver system consists of two cascaded power conversion stages, i.e., an isolation DC/DC converter and LED driver. LED driver is usually implemented with the same number of expensive boost converters as those of LED channels to tightly control the current through each LED channel. Therefore, its overall system size is not only bulky, but the cost is rather high. By contrast, the proposed LED driver system is composed of a single power stage with the DC/DC converter and LED driver merged. Although the current balancing circuit of the proposed LED driver requires only passive devices instead of expensive boost converters, all currents through multi-channel LEDs can be well balanced. Therefore, the proposed LED driver features a small system size, improved efficiency, and low cost. To confirm the validity of the proposed driver, its operation and performance are verified on a prototype for a 46" LED TV.

• Journal of Communications and Networks
• /
• 제7권3호
• /
• pp.284-293
• /
• 2005

A critical issue in applications involving networks of wireless sensors is their ability to synchronize, and mitigate the fading propagation channel effects. Especially when distributed 'slave' sensors (nodes) reach-back to communicate with the 'master' sensor (gateway), low power cooperative schemes are well motivated. Viewing each node as an antenna element in a multi-input multi-output (MIMO) multi-antenna system, we design pilot patterns to estimate the multiple carrier frequency offsets (CFO), and the multiple channels corresponding to each node-gateway link. Our novel pilot scheme consists of non-zero pilot symbols along with zeros, which separate nodes in a time division multiple access (TDMA) fashion, and lead to low complexity schemes because CFO and channel estimators per node are decoupled. The resulting training algorithm is not only suitable for wireless sensor networks, but also for synchronization and channel estimation of single- and multi-carrier MIMO systems. We investigate the performance of our estimators analytically, and with simulations.

• 한국통신학회논문지
• /
• 제31권3B호
• /
• pp.183-198
• /
• 2006

매체공유기반 통신 시스템은 매체접근제어 과정에서 단말기의 채별 점유 제약 조건에 따라 크게 완전매체공유 시스템과 불완전매체 공유 시스템으로 구분할 수 있다 본 논문은 불완전매체공유 시스템의 매체접근제어기법의 개발을 위해 채널할당기법을 다루었다. 최적 채널할당기법은 채널할당 문제를 다중항목흐름(multi-commodity flow) 최대화 문제로 간주하고 선형 프로그래밍 문제를 유도하여 전역 최적해를 구한다. 또한 연산 복잡도를 낮추기 위한 대안으로 준최적 채널할당기법을 제안한다. 이 방식은 2단 iSLIP 채널할당기법과 순차적(sequential) 채널할당기법으로 구분하여 제안한다. 모의실험 결과 순차적 채널할당기법이 2단 iSLIP 채널할당기법 비해 상대적으로 낮은 연산 복잡도와 우월한 성능을 나타냄을 확인할 수 있었다.