• 제목/요약/키워드: Multi-channel system

검색결과 1,369건 처리시간 0.025초

해양교통시설물용 다채널 AFS에 관한 연구 (A Study of Multi-channel AFS for Marine Traffic Facilities)

  • 김지윤;이지영;오진석
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권1호
    • /
    • pp.75-80
    • /
    • 2015
  • 최근 일정기간 해상에서 운용된 해양교통시설물은 수주와 파도 유입구에 해조류 증착이 발생되어, 파력발전 효율이 감소되는 문제점이 발생하였다. 따라서 해조류 증착을 억제하고자 단일채널 AFS(Anti-Fouling System)를 적용하였다. 그러나 단일채널 AFS에 이용된 구리 전극봉의 이온화 불균형 현상이 나타났다. 구리 전극봉의 이온화 불균형은 전극봉의 교환시기를 앞 당겨, 잦은 전극봉의 교체가 필요한 문제가 발생하였다. 본 논문에서는 다 채널 전류제어 방식을 이용한 해양교통시설물용 다채널 AFS의 알고리즘을 만들고, 하드웨어를 설계, 제작하였다. 그리고 기존의 단일채널 AFS와 다채널 AFS의 실 해역실험을 통해 제어방식에 따른 구리 전극봉 이온화 차이를 확인할 수 있는 비교 실험을 진행하였다. 실 해역실험결과 다채널 AFS에 이용된 구리 전극봉이 균일하게 이온화 되는 것을 확인할 수 있었다.

지상파 DMB를 통한 멀티채널 오디오 서비스 검증에 관한 연구 (Verification of the Multi-channel Audio Service over T-DMB)

  • 장대영;이용주
    • 방송공학회논문지
    • /
    • 제12권3호
    • /
    • pp.222-229
    • /
    • 2007
  • 멀티미디어 부호화 기술의 발전에 따라 HDTV, DVD 등 고품질 멀티미디어 서비스가 가능하여 졌으며, 오디오의 경우 5.1채널 오디오의 사용범위가 점점 확대되어, 가정용 극장 시스템(Home Theater), 자동차용 극장 시스템(Car Theater)에 의해 일반 소비자들도 쉽게 접할 수 있는 서비스가 되었다. 지상파 DMB는 휴대용 방송 서비스로서 2005년 12월부터 본격적으로 서비스되고 있으나, 그 대역폭이 충분하지 않고 휴대용이라는 특성에 의해 멀티채널 오디오에 대한 고려를 하지 않고 있다. 최근 휴대용 방송 서비스를 위한 고효율 멀티채널 오디오 부호화 기술 표준화가 MPEG에서 추진되고 있음에 따라 DMB에서도 멀티채널 오디오 서비스에 대한 가능성이 열렸으며, 유럽에서는 이를 이용한 다양한 서비스를 시도하려고 계획하고 있다. 본 논문에서는 한국에서 서비스되고 있는 지상파 DMB를 통한 멀티채널 오디오 서비스의 가능성을 검증하기 위해 멀티채널 오디오 부호화 기술 및 검증 시스템의 구현에 대하여 기술하며, 향후 서비스 실현을 위한 가능성을 고찰하고자 한다.

Capacity Increasement of Trellis Coded 16 QAM Multi-Carrier CDMA System due to SC/MRC Diversity in Multiuser Interference and Rician Fading Channel.

  • 노재성;강희조;김춘길;김언곤;조성준
    • 한국통신학회논문지
    • /
    • 제25권3A호
    • /
    • pp.362-374
    • /
    • 2000
  • In this paper, trellis coded 16 QAM Multi-Carrior CDMA system is proposed, Using the equivalent signal-to-noise plus interference Power ratio (SNIR) of Multi-Carrier CDMA system in the reverse link, capacity and BER performance of trellis coded 16 QAM Multi-Carrier CDMA system are analyzed taking into account the number of multi-carrier, the number of multiple access user, the number of SC/MRC diversity branch, and Rician fading parameter in multiuser interference and Rician fading channel. And the capacity and the BER performance of trellis coded 16 QAM Multi-Carrier CDMA system using selection combining (SC) and maximal ratio cabining (MRC) diversity are numerically compared. Obtained results show that the capacity of proposed system depends on the number of multi-carrier. ti is found that the trellis coded 16 QAM Multi-Carrier CDMA system with SC/MRC antenna diversity scheme is efficient to combat multipath fading and to increase the maximum number of users in high speed data communication. With the results of analysis. MRC diversity technique provides the performance fro high speed data communications. Finally, we present a numerical approach to derive the capacity and the BER performance and to find the maximum number of multiple access user for Multi-Carrier system in multiuser interference and Rician fading channel.

  • PDF

Seamless Video Switching System for Service Compatible 3DTV Broadcasting

  • Kim, Sangjin;Jeon, Taehyun
    • ETRI Journal
    • /
    • 제38권5호
    • /
    • pp.847-857
    • /
    • 2016
  • Broadcasting services such as multi/single channel HDTV and 3DTV/2DTV use a multi-channel encoder that changes the bitrate and composition of the video service depending on the time. However, this type of multi-channel encoder could cause a longer latency owing to the variable bitrate and relatively bigger size of the buffers, which results in the same delay as in 3DTV even for a conventional DTV service. On the other hand, systems built based on separate encoders, each of which is optimized for the target service, might not have such latency problems. Nevertheless, there might be a distortion problem in the image and sound at the time of a switchover between two encoders with different output bitrates and group of picture structures. This paper proposes a system that can realize a seamless video service conversion using two different video encoders optimized for each video service. An overall functional description of the video service change control server, which is a main control block for the proposed system, is also provided. The experiment results confirm the seamless switchover and reduced broadcasting latency of DTV services compared with a broadcasting system composed of a multi-channel encoder system.

Clustering Formation and Topology Control in Multi-Radio Multi-Channel Wireless Mesh Networks

  • 마 빅토리아 께;황원주
    • 한국통신학회논문지
    • /
    • 제33권7B호
    • /
    • pp.488-501
    • /
    • 2008
  • Convergence of various wireless systems can be cost effectively achieved through enhancement of existing technology. The emergence of Wireless Mesh Network (WMN) entails the interoperability and interconnection of various wireless technologies in one single system. Furthermore, WMN can be implemented with multi-radio and multi-channel enhancement. A multi-radio, multi-channel wireless mesh network could greatly improve certain networking performance metrics. In this research, two approaches namely, clustering and topology control mechanisms are integrated with multi-radio multi-channel wireless mesh network. A Clustering and Topology Control Algorithm (CTCA)is presented that would prolong network lifetime of the client nodes and maintain connectivity of the routers.

Design and Implementation of a DSP-Based Multi-Channel Power Measurement System

  • Jeon Jeong-Chay;Oh Hun
    • KIEE International Transactions on Power Engineering
    • /
    • 제5A권3호
    • /
    • pp.214-220
    • /
    • 2005
  • In order to improve energy efficiency and solve power disturbances, power components measurement for both the supply and demand side of a power system must be implemented before appropriate action on the power problems can be taken. This paper presents a DSP (Digital Signal Processor)-based multi-channel (voltage 8-channel and current 10-channel) power measurement system that can simultaneously measure and analyze power components for both supply and demand. Voltage 8-channel and current 10-channel measurement is made through voltage and current sensors connected to the developed system, and power components such as reactive power, power factor and harmonics are calculated and measured by the DSP. The measured data are stored in a personal computer (PC) and a commercial program is then used for measurement data analysis and display. After voltage and current measurement accuracy revision using YOKOGAWA 2558, the developed system was tested using a programmable ac power source. The test results showed the accuracy of the developed system to be about 0.3 percent. Also, a simultaneous measurement field test of the developed system was implemented by application to the supply and demand side of the three-phase power system.

다중음원을 이용한 다중채널 해양 탄성파 탐사 (Marine Seismic Survey using a Multi-source System)

  • 김현도;김진후
    • 한국마린엔지니어링학회:학술대회논문집
    • /
    • 한국마린엔지니어링학회 2006년도 전기학술대회논문집
    • /
    • pp.209-210
    • /
    • 2006
  • Digital technology has been applied to marine seismic survey to develop data processing technology and multi-channel marine seismic survey. In result, high-resolution marine seismic survey ended in a success. Surveys are conducted for various purposes using various frequencies of acoustic sources. A low frequency source is used for deeper penetration and a high frequency source is used for higher resolution survey. In this study, a multi-source system was used for multi-channel marine seismic survey to acquire seismic sections of both low and high frequencies. Variations of depth of penetration and resolution would be used to achieve more accurate analysis of formations. In this study, the multi-source system consists of Bubble Pulser(400 Hz) for low frequency source and Sparker(1.5 kHz) for high frequency source.

  • PDF

Effect of Fiber Dispersion and Self-phase Modulation in Multi-channel Subcarrier Multiplexed Optical Signal Transmission

  • Kim, Kyoung-Soo;Jeong, Ji-Chai;Lee, Jae-Hoon
    • Journal of the Optical Society of Korea
    • /
    • 제14권4호
    • /
    • pp.351-356
    • /
    • 2010
  • We investigated the combined effect of fiber chromatic dispersion and self-phase modulation (SPM) in multi-channel subcarrier multiplexed (SCM) optical transmission systems. We theoretically analyzed the transmission characteristics of the SCM signals with the effect of SPM and chromatic dispersion in a single-mode optical fiber by numerical simulations based on the nonlinear Schrodinger equation. The numerical simulation results revealed that the effect of fiber dispersion and SPM could occur independently between subcarrier channels in two-channel SCM systems for small optical modulation index (OMI) and large channel spacing. However, for large OMI, small channel spacing, and large fiber launching power, we found a performance degradation of the two-channel system compared to that of a single-channel system. These parameters are therefore important for the optimization of multi-channel SCM systems applicable to radio over fiber networks.

인지무선통신에서 채널 용량을 고려한 예측기반 다중채널할당기법 (Channel Capacity-Based Multi-Channel Allocation in Cognitive Radio Networks)

  • 이주현;박형근
    • 전기학회논문지
    • /
    • 제62권12호
    • /
    • pp.1755-1757
    • /
    • 2013
  • Dynamically exploiting unused-spectrum, cognitive radio has been proposed to solve spectrum utilization problem. In cognitive radio, it is important to minimize the interference to primary service as well as to provide efficient channel allocation. In this paper, we propose a multi-channel allocation scheme based on spectrum hole prediction. Proposed scheme considered both interference length and channel capacity to limit the interference to primary user as well as to enhance system performance. Simulation results show the proposed scheme improves the system throughput.

4자유도 모션 플랫폼을 이용한 잠수함의 운동감 재현과 스테레오 다채널 가시화 (Submarine Behavior Simulation based on 4-DOF Motion Platform and Stereoscopic Multi-Channel Visualization)

  • 허정순;한순흥
    • 한국CDE학회논문집
    • /
    • 제17권5호
    • /
    • pp.333-341
    • /
    • 2012
  • Modeling and simulation is important for military training. People can feel perspective when stereoscope images are created using multi-channel visualizations. A submarine oscillates when the submarine is just below the surface of the sea, so that the reconnaissance becomes difficult. Also, the operator should read the information of the target within 6 seconds using the periscope. The operator must have experience. To solve these problems, stereoscopic multi-channel visualization has been tested. The iCAVE system of KAIST provides a large-scale screen, 7 PCs, and 14 projectors to create the stereoscope images. To simulate the motion of a submarine just below the ocean surface, a 4-DOF motion platform is used. The motion data is transmitted to the visual system and the motion platform through the UDP protocol. Variety of weather conditions are created using the Vega Prime software. The stereoscopic multi-channel visualization and the motion platform system created a realistic simulation system.