• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.11
• /
• pp.938-941
• /
• 2012

LED is divided to multichannel in order not to exceed a certain voltage in aspects of electric standard. However, it's not possible to know in accordance with what channel SMPS controls the constant voltage and current. In order to solve this problem, it needs to detect the maximum LED String voltage which is applied to LED control circuit, and it is possible to minimize the voltage drop when a difference of LED string voltage occurs by each channel if LED is controlled by the maximum LED string voltage detected. In addition, it is also possible to maximize the efficiency of LED if change LED voltage by detecting the maximum voltage. Feasibility of this claim was verified through implementation of the circuit.

• Journal of the Korean Ceramic Society
• /
• v.42 no.12 s.283
• /
• pp.865-871
• /
• 2005

Submicron thick solid electrolyte membrane is essential to the implementation of low temperature solid oxide fuel cell, and, therefore, development of new electrode structures is necessary for the submicron thick solid electrolyte deposition while providing functions as current collector and fuel transport channel. In this research, a nickel membrane with multi-stage nano hole array has been produced via modified two step replication process. The obtained membrane has practical size of 12mm diameter and $50{\mu}m$ thickness. The multi-stage nature provides 20nm pores on one side and 200nm on the other side. The 20nm side provides catalyst layer and $30\~40\%$ planar porosity was measured. The successful deposition of submicron thick yttria stabilized zirconia membrane on the substrate shows the possibility of achieving a low temperature solid oxide fuel cell.

• Proceedings of the KIEE Conference
• /
• 2005.10b
• /
• pp.472-474
• /
• 2005

In WDM/SCM-PON system more than thousand signals must be gathered to monitor for operation. We have implemented IEEE STD 1149.1 JTAG serial interface bus to gather and monitor analog signals. Required area is just $5{\times}5mm^2$. Gathering time per one signal is $1.75{\mu}$ second. Performance to gather is better than that defined in SFF-8472.

• Journal of Digital Contents Society
• /
• v.19 no.7
• /
• pp.1349-1355
• /
• 2018

Recently, a variety of contents services over the internet are becoming popular, among which MCN(Multi Channel Network) platform services have become popular with the generalization of smart phones. The MCN platform is based on streaming, and various factors are added to improve the service. Among them, augmented reality sticker service using face recognition is widely used. In this paper, we implemented the MCN platform that masks the augmented reality sticker on the face through facial emotion recognition in order to further increase the interest factor. We analyzed seven facial emotions using deep learning technology for facial emotion recognition, and applied the emotional sticker to the face based on it. To implement the proposed MCN platform, emotional stickers were applied to the clients and various servers that can stream the servers were designed.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.8 no.1
• /
• pp.199-206
• /
• 2013

Recently, the diverse needs of the drivers for in-vehicle infotainment systems are increasing rapidly. As a result, the infotainment systems are equipped with more convenient and human-friendly high-tech features. In this paper, we designed and implemented in-vehicle multimedia infotainment system based on embedded system that was applied various multimedia to in-vehicles. The proposed system can support independent display on each screen for the multi-channel multimedia source based on one processor(1 CPU). Therefore, our system can be reduced costs compared to other systems. This system not only displays the video and audio data in storage devices but also displays CAM, T-DMB, and DVB-T multimedia contents which are supplied in real-time services. Also, our system could multi-screen displays multimedia data in smart phone using Wi-Fi. We expect that in-vehicle infotainment systems like AVN(Audio video navigation) and RSE(Rear Seat Entertainment) could be used in various applications and reduced costs.

• The KIPS Transactions:PartA
• /
• v.9A no.4
• /
• pp.451-458
• /
• 2002

In this article, we present, design, and implement a software and hardware for an embedded RAID system. The merits and drawbacks of our system are presented by performance evaluation. The proposed hardware system consists of three fibre channel controllers for the interface with fibre channel disks and hosts. Embedded Linux in which a RAID software is implemented is ported to the hardware. A SCSI target mode device driver and a target mode SCSI module are designed for that our RAID system is considered as a block device to a host computer. Linux Multi-device is used as RAID functions of this system. A data cache module is implemented for high performance and the interconnection between Linux Multi-device and the target mode SCSI module. The RAID 5 module of Multi-device is modified for improvement of read performance. The benchmark shows that the new RAID 5 module is superior to the original one in overall performance.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.17 no.6
• /
• pp.147-153
• /
• 2003

In this paper, implementation of active noise barriers(ANB) to attenuate exterior noise which is propagated through open windows is presented. The leaky multiple channel LMS algorithms are used for adaptive filters tc improve the convergence property, and a new type of the active noise barrier is proposed. The attenuation effects of conventional active noise control(ANC) systems using leaky multiple channel LMS algorithms and the proposed system are compared by experiments using a TMS320C33 digital signal processor. Noise attenuation levels at the points of error microphones are similar for both systems, but average noise attenuation effects of the proposed system for an entire space of an experimental enclosure are much better than conventional ANC systems.

• International Journal of Internet, Broadcasting and Communication
• /
• v.16 no.1
• /
• pp.17-28
• /
• 2024

As listed as one of the most important requirements for Post-Quantum Cryptography standardization process by National Institute of Standards and Technology, the resistance to various side-channel attacks is considered very critical in deploying cryptosystems in practice. In fact, cryptosystems can easily be broken by side-channel attacks, even though they are considered to be secure in the mathematical point of view. The timing attack(TA) and the simple power analysis attack(SPA) are such side-channel attack methods which can reveal sensitive information by analyzing the timing behavior or the power consumption pattern of cryptographic operations. Thus, appropriate measures against such attacks must carefully be considered in the early stage of cryptosystem's implementation process. The Montgomery multiplier is a commonly used and classical gadget in implementing big-number-based cryptosystems including RSA and ECC. And, as recently proposed as an alternative of building blocks for implementing post quantum cryptography such as lattice-based cryptography, the big-number multiplier including the Montgomery multiplier still plays a role in modern cryptography. However, in spite of its effectiveness and wide-adoption, the multiplier is known to be vulnerable to TA and SPA. And this paper proposes a new countermeasure for the Montgomery multiplier against TA and SPA. Briefly speaking, the new measure first represents a multiplication operand without 0 digits, so the resulting multiplication operation behaves in a very regular manner. Also, the new algorithm removes the extra final reduction (which is intrinsic to the modular multiplication) to make the resulting multiplier more timing-independent. Consequently, the resulting multiplier operates in constant time so that it totally removes any TA and SPA vulnerabilities. Since the proposed method can process multi bits at a time, implementers can also trade-off the performance with the resource usage to get desirable implementation characteristics.

• Proceedings of the IEEK Conference
• /
• 2004.08c
• /
• pp.477-481
• /
• 2004

High Quality CD, OAT audio requires that large amount of data. Currently, multi channel preference has been rapidly propagated among latest users. The MPEG(Moving Picture Expert Group) is provides data compression technology of sound and image system. The MPEG standard provides multi channel and 5.1 sounds, using the same audio algorithm as MPEG-l. And MPEG-2 audio is forward and backward compatible. The MDCT (Modified Discrete Cosine Transform) is a linear orthogonal lapped transform based on the idea of TDAC(Time Domain Aliasing Cancellation). In this paper, we proposed the micro-program type vector processor architecture a benefit in MDCT/IMDCT of MPEG-II AAC. And it's reduced operating coefficient by overlapped area to bind. To compare original algorithm with optimized algorithm that cosine coefficient reduced $0.5\%$multiply operating $0.098\%$ and add operating 80.58\%$. Algorithm test is used C-language then we designed hardware architecture of micro-programmed method that applied to optimized algorithm. This processor is 20MHz operation 5V.

• Journal of Internet Computing and Services
• /
• v.9 no.3
• /
• pp.103-117
• /
• 2008

General customer uses internet, SMS(Short Message Service), ATM(Automated Teller Machine), DM(Direct Mail), and telephony services, etc, for service of big businesses and small and medium enterprises, securities, financial institutions, bank. In particular, the case of Fire insurance & Securities, financial institutions, banks must meet Real-Time constrain control through QoS(Quality of Service) ensure. In this paper, we design and implement a system model about Fault-Tolerance IVR(Interactive Voice Response) of Multi Channel Service based on CRM(Customer Relationship Management) environment for the first inbound position of customer. The proposed model can be widely used in Large-scale Customer Response service.