• Journal of electromagnetic engineering and science
• /
• v.8 no.2
• /
• pp.41-46
• /
• 2008

A bandwidth and power efficient high speed ubiquitous sensor network(USN) for realizing a ubiquitous society is a great challenge for researcher community. In this paper we incorporate a cooperative transmission protocol within a special type of multi-code modulation to meet these requirements. Multi-code(Mc) modulation has been developed for high-speed data transmission over wireless channels. We proposed a new class of orthogonal codes for multi-code modulation which is an orthogonal subset of orthogonal codes(OSOC). Our proposed OSOC structure allows us to use only one relay to cooperate M nodes that effectively reduces the bandwidth and power requirement. This protocol is similar to spread-spectrum(SS) technique that can reduce both broad and narrow band jamming.

• Journal of the Korean Professional Engineers Association
• /
• v.30 no.4
• /
• pp.18-29
• /
• 1997

The telecommunications industry pro-grossed as old media, but new media is going into a new era of multi-media in the 21st century. In the latter half of 1970s we saw a boom of new media as a post-telephone era began. As the machines grew to the world level(standard), facsimiles, minitels of France and word processors of Japan were developed. Today some 15 years since the advent of new media era, the progress of technology is astonishing. Advancement of technology is seen in V and U letters attached to semiconductor chips, astonishing capability advancement of light emitting lasers and photo-diodes, etc and additionally technology advancement in large capacitized light disks. Thus these technologies have made possible transmitting a broad band network and a mobile communication and digitalized broadcasting. Increased capacity of every terminal, e.g, "letters $.$ voice $.$ still and mov-ing pictures" are essential for new media simultaneous and two -way transmission.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.5
• /
• pp.759-766
• /
• 2022

In this paper, we propose a multi-band small antenna with CPW(Coplanar Waveguide) feeding structure WLAN(Wireless Local Area Network) and WiMAX (Worldwide Interoperability for Microwave Access) bands. The proposed antenna is designed two slit in the modified monopole type radiator and FR-4 substrate, which is thickness 1.0 mm, and the dielectric constant is 4.4. The size of proposed antenna is 15.1 mm⨯16.41 mm, and total size of proposed antenna is 17.5 mm⨯16.4 mm. From the fabrication and measurement results, From the fabrication and measurement results, bandwidths of 439 MHz (2.06 to 2.499 GHz), 840 MHz (3.31 to 4.25) and 1,315 MHz (5.23 to 6.545 GHz) were obtained on the basis of -10 dB impedance bandwidth. Also, 3D radiation pattern characteristics of the proposed antenna are displayed and measured gains 2.24 dBi, 2.83 dBi, and 2.0 dBi shown in the three frequency band, respectively.

• TTA Journal
• /
• s.100
• /
• pp.161-169
• /
• 2005

IEEE802.15에서 표준화가 진행중인 WPAN(wireless personal network)은 개인영역 네트워크 혹은 근거리 무선 네트워크를 구축하기 위한 기술로, 개인용 컴퓨터, PDA, 주변기기, 휴대전화, 가전 등의 휴대나 이동 컴퓨팅을 위한 기술이다. IEEE802.15.1에서는 블루투스, IEEE802.15.4에서는 ZigBee를 위한 저속 WPAN(low rate WPAN) 그리고 IEEE802.15.3에서는 고속 WPAN(high rate WPAN)에 대한 표준화를 담당하고 있다. 본 고에서는 IEEE802.15 산하 TG3a에서 표준화 중인 Alt-PHY 기술로 경합을 벌이고 있는 MBOA(Multi-Band Orthogonal frequency division multiplexing Alliance) UWB(ultrawideband)에 대한 활성화를 꾀하고 있는 WiMedia Alliance의 시험인증 동향을 고찰하고자 한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.32 no.6A
• /
• pp.648-656
• /
• 2007

This paper is about band pass filter, using Ceramics in the condition of center frequency 370Hz at milli-wave. The band pass filter is applied to Broadband Convergence Network, representing WLL(Wireless Local Loop) and LMDS(Local Multi-point Distribution Service). Sticking ceramic between strip line on a dielectric material substrate with which conductor's covers upper and basal surface, One will house the exterior by using structural resonance. In this Non Radiative Microstrip Line Filter structure, based upon simulations, generalized the two formulas finding resonant frequency of 1step ceramic resonator and bandwidth of 4step ceramic resonator. Also, As a result of experiment, using Network Analyzer, about created a experiment of structure based on the simulation result of 4-step ceramic resonator, It showed good characteristic of targeted bandwidth, comparing simulated result of 36.58GHz$\sim$37.650GHz with experimented result of 36.6GHz$\sim$37.65GHz.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.38B no.4
• /
• pp.305-313
• /
• 2013

As an FMT (Filtered Multi-Tone) transmission method of Wideband VHF communication system specified by the ETS (European Telecommunications Standards) EN 300 392-2, this paper introduces three existing realization methods, i.e., the direct filtering method using different band SRRC (Square-Root Raised Cosine) filters for each subcarrier, the PPN-DFT method using the IDFT-PPN (Poly-Phase Network) and PPN-DFT at the transmitter and receiver, respectively, and the Extended DFT method. Then, it proposes the extended IDFT-SDFT (Sliding Discrete Fourier Transform) that computes the DFT values only for interested subcarriers every sample time, and shows that it has an advantage of blind symbol timing (using no training symbol) individually for each user signal (independently of other users' signals) in the multi-user environment where the subcarriers are assigned in contiguous or interleaved blocks to each user and each user signal possibly experiences different channels.

• Journal of IKEEE
• /
• v.16 no.4
• /
• pp.297-303
• /
• 2012

This paper proposes the effective design procedure for a broadband, double-ridged horn antenna for evaluating the performance of the RF energy harvesting system with a multi-band rectenna. Using multi-mode network analysis, the higher-mode scattering parameters of the transition and horn were acquired and applied to the antenna design, respectively. As a result, the computing time could be reduced and the calculated VSWR(voltage standing wave ratio) of the antenna was very similar to the analyzed result using fully electromagnetic simulation. And there was also good agreement between the simulated and measured results. The designed broadband antenna has a bandwidth of 660~6360 MHz and 6~13.7 dBi peak radiation gain.

• Journal of Communications and Networks
• /
• v.18 no.3
• /
• pp.364-374
• /
• 2016

With vast amounts of spectrum available in the millimeter wave (mmWave) band, small cells at mmWave frequencies densely deployed underlying the conventional homogeneous macrocell network have gained considerable interest from academia, industry, and standards bodies. Due to high propagation loss at higher frequencies, mmWave communications are inherently directional, and concurrent transmissions (spatial reuse) under low inter-link interference can be enabled to significantly improve network capacity. On the other hand, mmWave links are easily blocked by obstacles such as human body and furniture. In this paper, we develop a multi-hop relaying transmission (MHRT) scheme to steer blocked flows around obstacles by establishing multi-hop relay paths. In MHRT, a relay path selection algorithm is proposed to establish relay paths for blocked flows for better use of concurrent transmissions. After relay path selection, we use a multi-hop transmission scheduling algorithm to compute near-optimal schedules by fully exploiting the spatial reuse. Through extensive simulations under various traffic patterns and channel conditions, we demonstrate MHRT achieves superior performance in terms of network throughput and connection robustness compared with other existing protocols, especially under serious blockage conditions. The performance ofMHRT with different hop limitations is also simulated and analyzed for a better choice of the maximum hop number in practice.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2009.10a
• /
• pp.705-708
• /
• 2009

This research describes a neural network-based phoneme segmenter for recognizing spontaneous speech. The input of the phoneme segmenter for spontaneous speech is 16th order mel-scaled FFT, normalized frame energy, ratio of energy among 0~3[KHz] band and more than 3[KHz] band. All the features are differences of two consecutive 10 [msec] frame. The main body of the segmenter is single-hidden layer MLP(Multi-Layer Perceptron) with 72 inputs, 20 hidden nodes, and one output node. The segmentation accuracy is 78% with 7.8% insertion.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.11 no.11
• /
• pp.1083-1092
• /
• 2016

In this paper, the performance of the optical code-division multiple access (OCDMA) technology on a plastic optical fiber (POF) access network, which had received much attention due to its low weight, large core diameter, flexibility, easy installation, and especially its high bandwidth, is analyzed. Recently, POF was a very attractive candidate for transmission media in an access network based on OCDMA technology. But the conventional OCDMA system only allows finite units to transmit and access simultaneously according to the number of channels which are restricted by BER, and so, in this paper, to resolve this problem a novel multi-priority reservation protocol is also proposed. By using this reservation scheme and a distributed arbitration algorithm, channel collision and destination conflict could be avoided. And this protocol can efficiently support the transmission of multimedia messages that require the different time-delay. The network throughput and average delay using various system parameters have been investigated by numerical analysis and simulation experiments. These results shows that the multi-priority reservation protocol in this POF access network based on OCDMA technology is valid and efficient.