• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.1219-1222
• /
• 2005

As the optical communication is introduced to the backbone network at first and becomes a general communication method of network, the demand of kernel parts of optical communication such as PLC(Planar Light Circuit), Coupler, and WDM(Wavelength Division Multiplexing) element increases. The alignment and the attachment technology are very important in the fabrication of optical elements. In this paper, the driving mechanism of ultra precision stage is studied with the aim of optimal design of stage. The travel and the resolution of stage are investigated. The hysteresis of the stage is generated because of PZT actuator. The hysteresis and the inverse hysteresis are modeled in X, Y, and Z-axis motion. The input data of desired displacement to the stage according to input voltage is obtained from the inverse hysteresis equation. In the result of experiments with the input data, the errors due to hysteresis are well compensated.

• 천문학회보
• /
• 제41권1호
• /
• pp.79.1-79.1
• /
• 2016

We investigated the dynamical properties of the K2-3 multi-planet system. Recently three transiting planets are discovered using the extended Kepler2 (K2) mission (Crossfield et al. 2015). We extended their preliminary stability study by considering a substantial longer integration time. Since planet mass is not known from photometry we calculated exoplanets masses using empirical mass-radius relations (Weiss & Marcy 2014). Forward numerical integration was done using the MERCURY integration package (Chambers 1999). Our results demonstrate that this system is stable over a time scale of $10^8years$. Furthermore, we investigated the dynamical effects of a hypothetical planet in the semi-major axis vs eccentricity space. For stable orbits of the hypothetical planet we calculated transit-timing variation (TTV) and radial velocity signals. We find that for a hypothetical perturber with mass 1-13 Mjup, semi-major axis 0.2 - 0.8 AU and eccentricity 0.00-0.47 the following timing signals for the planet K2-3 b is ~ 5 sec, K2-3 c is ~ 130 sec and for K2-3 d is ~ 190 sec. The radial velocity signal of the hypothetical planet is ~ 4 m/s. Using typical transit-timing errors from the K2 mission, we find that the above hypothetical planet would not be detectable. Its radial velocity signal, however, would be detectable using the APF 2.4m telescope or HARPS at the ESO/La Silla Observatory in Chile.

• 대한기계학회논문집A
• /
• 제29권2호
• /
• pp.188-200
• /
• 2005

Control of a multi-fingered robotic hand is usually based on the theoretical analysis for kinematics and dynamics of fingers and of object. However, the implementation of such analyses to robotic hands is difficult because of errors and uncertainties in the real situations. This article presents the control method for estimating the kinematic constraint of an unknown object by active sensing. The experimental system has a two-fingered robotic hand suspended vertically for manipulation in the vertical plane. The fingers with three degrees-of-freedom are driven by wires directly connected to voice-coil motors without reduction gears. The fingers are equipped with three-axis force sensors and with dynamic tactile sensors that detect slippage between the fingertip surfaces and the object. In order to make an accurate estimation for the kinematic constraint of the unknown object, i.e. the constraint direction and the constraint center, four kinds of the active sensing and feedback control algorithm were developed: two position-based algorithms and two force-based algorithms. Furthermore, the compound and effective algorithm was also developed by combining two algorithms. Force sensors are mainly used to adapt errors and uncertainties encountered during the constraint estimation. Several experimental results involving the motion of lifting a finger off an unknown object are presented.

• 한국컴퓨터정보학회논문지
• /
• 제14권6호
• /
• pp.41-49
• /
• 2009

본 논문에서는 광학식 모션캡처 장비를 위한 다중 카메라 보정 방법을 제안한다. 이 방법은 DLT(Direct linear transformation) 알고리즘을 이용하여 7개의 마커가 있는 3축 보정틀의 영상을 획득하여 1차 카메라 보정을 한다. 그리고 2개의 마커가 있는 보정봉을 측정하고자 하는 영역에서 움직여서 2차 카메라 보정을 실시한다. 1차 카메라 보정에서는 카메라 보정뿐만 아니라 렌즈 왜곡 계수를 계산하여 2차 카메라 보정에서의 최적화를 위한 초기해로 사용한다. 2차 카메라 보정에서는 보정봉에 있는 마커사이의 거리가 일정하기 때문에 계산된 마커 거리와 실제 마커 거리의 차가 최소화 되도록 최적화를 수행한다. 제안한 방법에 의한 다중 카메라 보정 방법을 검증하기 위하여 재투영에러를 계산하였고 3축 보정틀에 있는 마커사이의 거리와 보정봉에 있는 마커사이의 거리를 계산하여 다른 상용장비의 값과 비교하였다. 3축 보정틀에 있는 마커를 복원하여 에러를 비교한 결과 평균오차가 상용장비의 1.7042mm에 비해 0.8765mm로 51.4% 수준으로 나타났고, 보정봉에 있는 마커를 복원하여 에러를 비교한 결과 상용장비의 평균에러 1.8897mm에 비해 2.0183mm로 0.1286mm 크게 나타났다.

• 한국통신학회논문지
• /
• 제34권10B호
• /
• pp.1093-1103
• /
• 2009

본 논문에서는 효율적인 보조 정보 생성을 통한 새로운 분산 다시점 비디오 코딩 기법을 제안한다. 분산 비디오 코딩은 원영상과 디코더에서 생성한 보조 정보 간의 오차를 채널 코딩 기법으로 정정한다. 따라서 보조 정보를 정확히 만들수록 분산 비디오 코딩의 성능은 좋아지게 된다. 제안한 기법에서는 깊이지도를 기반으로 하는 다시점 비디오 코딩에 분산 비디오 코딩 기법을 적용한다. 또한 깊이지도를 이용한 3차원 워핑을 통해 인접한 시점의 영상으로부터 보조 정보를 생성하고, 3차원 워핑과 시간 축 상의 인접한 영상을 이용하는 MCTI(motion compensated temporal interpolation)를 효율적으로 혼합하여 사용한다. 실험 결과 제안한 기법으로 생성한 보조 정보는 MCTI와 3차원 위핑을 따로 사용한 방법보다 평균 0.97dB의 PSNR이 향상되었음을 알 수 있었다. 또한 R-D 곡선 상에서 동일 PSNR 대비 평균 8.01%의 비트율이 감소되었다.

• International Journal of Aeronautical and Space Sciences
• /
• 제8권1호
• /
• pp.10-20
• /
• 2007

For spacecraft attitude control, reaction wheel (RW) steering laws with more than three wheels for three-axis attitude control can be derived by using a control allocation (CA) approach.1-2 The CA technique deals with a problem of distributing a given control demand to available sets of actuators.3-4 There are many references for CA with applications to aerospace systems. For spacecraft, the control torque command for three body-fixed reference frames can be constructed by a combination of multiple wheels, usually four-wheel pyramid sets. Multi-wheel configurations can be exploited to satisfy a body-axis control torque requirement while satisfying objectives such as minimum control energy.1-2 In general, the reaction wheel steering laws determine required torque command for each wheel in the form of matrix pseudo-inverse. In general, the attitude control command is generated in the form of a feedback control. The spacecraft body angular rate measured by gyros is used to estimate angular displacement also.⁵ Combination of the body angular rate and attitude parameters such as quaternion and MRPs(Modified Rodrigues Parameters) is typically used in synthesizing the control command which should be produced by RWs.¹ The attitude sensor signals are usually corrupted by noise; gyros tend to contain errors such as drift and random noise. The attitude determination system can estimate such errors, and provide best true signals for feedback control.⁶ Even if the attitude determination system, for instance, sophisticated algorithm such as the EKF(Extended Kalman Filter) algorithm⁶, can eliminate the errors efficiently, it is quite probable that the control command still contains noise sources. The noise and/or other high frequency components in the control command would cause the wheel speed to change in an undesirable manner. The closed-loop system, governed by the feedback control law, is also directly affected by the noise due to imperfect sensor characteristics. The noise components in the sensor signal should be mitigated so that the control command is isolated from the noise effect. This can be done by adding a filter to the sensor output or preventing rapid change in the control command. Dynamic control allocation(DCA), recently studied by Härkegård, is to distribute the control command in the sense of dynamics⁴: the allocation is made over a certain time interval, not a fixed time instant. The dynamic behavior of the control command is taken into account in the course of distributing the control command. Not only the control command requirement, but also variation of the control command over a sampling interval is included in the performance criterion to be optimized. The result is a control command in the form of a finite difference equation over the given time interval.⁴ It results in a filter dynamics by taking the previous control command into account for the synthesis of current control command. Stability of the proposed dynamic control allocation (CA) approach was proved to ensure the control command is bounded at the steady-state. In this study, we extended the results presented in Ref. 4 by adding a two-step dynamic CA term in deriving the control allocation law. Also, the strict equality constraint, between the virtual and actual control inputs, is relaxed in order to construct control command with a smooth profile. The proposed DCA technique is applied to a spacecraft attitude control problem. The sensor noise and/or irregular signals, which are existent in most of spacecraft attitude sensors, can be handled effectively by the proposed approach.

• 한국멀티미디어학회논문지
• /
• 제21권8호
• /
• pp.982-990
• /
• 2018

In recent years, many wearable devices and mobile apps related to life care have been developed, and a service for measuring the movement during walking and showing the amount of exercise has been provided. However, they do not measure walking in detail, so there may be errors in the total calorie consumption. If the user's behavior is measured by a multi-axis sensor and learned by a machine learning algorithm to recognize the kind of behavior, the detailed operation of walking can be autonomously distinguished and the total calorie consumption can be calculated more than the conventional method. In order to verify this, we measured activities and created a model using a machine learning algorithm. As a result of the comparison experiment, it was confirmed that the average accuracy was 12.5% or more higher than that of the conventional method. Also, in the measurement of the momentum, the calorie consumption accuracy is more than 49.53% than that of the conventional method. If the activity recognition is performed using the wearable device and the machine learning algorithm, the accuracy can be improved and the energy consumption calculation accuracy can be improved.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 춘계학술대회 논문집
• /
• pp.541-546
• /
• 2005

Tracking control of an automatic pipe cutting robot (APCROMB) is studied. Using magnetic force APCROMB, which is designed and developed in Kyung Hee University, binds itself to the pipe and executes unmanned cutting process. The gravity effect on the movement of APCROMB varies as it rotates around the cylindrical pipe laid in the gravitational field. To maintain a constant velocity and consistent cutting performance against the varying gravitational effect, the authors adopt a multi-rate repetitive learning controller (MRLC), which learns the required effort to cancel the repetitive tracking errors caused by nonlinear effect. In addition to the varying gravity effect other types of nonlinear disturbances including backlash in the driving system and the slip between the wheels of APCROMB and the pipe also cause degradation in the cutting process. In order to identify those nonlinear disturbances the position estimation based on the encoder attached at the motor is not good enough. To identify the absolute angular position of APCROMB the authors propose the angular position estimation based on the signals from a MEMS-type two-axis accelerometer mounted on APCROMB. The tracking performances of APCROMB with a MRLC using the encoder-based position estimation is experimentally measured and results are shown. Also the difference between the encoder-based angular displacement measurement and the accelerometerbased angular displacement measurement is included.

• 한국실내디자인학회논문집
• /
• 제16권5호
• /
• pp.38-46
• /
• 2007

In the late 1970s, the method of quantitative and scientific space structural analysis based on graph theory was introduced to the process of space design, which arranges design and functional elements, as relying heavily on intuition could produce errors due to unverified experiences and prejudices of the designer. As the method of space analysis is complex and hard to express visually and requires repetitive operations, it was discussed theoretically only. However, with the development of computer performance and graphic in recent years, visualization became possible. But the method of visual structural analysis of space is at the level of two dimensions and it is not easy to get accurate data when it is applied to limited three dimensional space such as an interior space. For the visual structural analysis of space, this study presents 4 indices including visibility volume level, pure visibility connection frequency, effective visibility connection frequency, and path visibility connection frequency. This study also presents space division using three dimensional arrangement rather than the existing vector operation method and raytracing algorithm at the lattice constant. Based on this, an analysis tool for the visible regions of three dimensional space that is capable of evaluating at multiple points by using three dimensional game engine and presentation tool that allows the analyzer to interpret the data effectively is made. It is applied to 2 prototype models by displacing Z axis, and the results are compared with UCL Depthmap to verify the validity of data and evaluate its usefulness as a multidimensional, multi-view space analysis tool.

• 한국의학물리학회지:의학물리
• /
• 제21권2호
• /
• pp.153-164
• /
• 2010

혈관분포도(vascularity) 및 세포조밀도(cellularity)와 같은 종양의 생물학적 특성을 고려한 임상표적체적을 결정하기 위하여, 국부혈류용적영상(regional cerebral blood volume map, rCBV map)과 겉보기확산계수영상(apparent diffusion coefficient map, ADC map)의 종양 체적을 해부학적 영상 위에 맵핑 할 수 있는 소프트웨어를 개발하였다. 개발한 프로그램은 해부학적 영상 및 기능 영상 간 mutual information, affine transform, non-rigid registration을 이용한 영상 정합 기능을 제공한다. 영상 정합 후 기준 영상과 정합된 영상에서 획득한 각 segmented bone의 겹치는 체적 비율 및 contour 간 평균 거리를 이용하여 정합도 평가도 가능하다. 잔여 종양이 있는 악성신경아교종 환자의 영상을 이용하여 소프트웨어의 기능을 평가하였을 때, bone segmentation과 contour 간 평균 거리 차이를 이용한 정합도는 각각 약 74%와 2.3 mm였으며, 수동정합을 이용하여 2~5% 정도의 정합도를 향상 시킬 수 있었다. 종양의 생물학적 특성을 치료 계획에 반영할 수 있도록, color map을 이용하여 rCBV map을 분석하였으며, ADC map에서 설정한 관심 영역의 평균 확산 계수와 표준 편차 등을 계산하여 종양의 예후 인자 및 악성도를 평가하였다. 두 기능 영상이 공통적으로 나타내는 종양 체적에서 얻은 생물학적 인자를 평면 위에 맵핑하여 종양의 특성을 쉽게 파악할 수 있는 multi-functional parametric map을 구성하였다. 또한 각기능 인자에 대응되는 악성 종양의 임계값을 적용하여 주변 종양 세포에 비하여 혈관 분포도는 높으면서 확산 계수는 낮아 악성 종양 세포일 확률이 높은 영역을 구분할 수 있었다. 각 기능 영상 위에서 설정한 생물학적 종양 체적 및 악성도가 높은 국소 체적은 해부학적 영상 위에 표시하여 dicom 파일로 출력할 수 있었다. 개발한 소프트웨어는 기능적 다중영상을 이용하여 생물학적 종양 체적을 해부학적 영상 위에 맵핑하는데 적용할 수 있으며, 해부학적 영상에서 파악하기 어려운 종양의 특성 변화들을 치료 계획에 활용할 수 있다. 나아가 개발한 소프트웨어를 이용하여, 한 종류의 영상을 참고하여 종양 체적을 결정했을 때 발생할 수 있는 오류를 줄이고, 치료 전이나 치료 과정에서 나타나는 종양의 조직학적, 생리학적 특성을 치료 계획에 접목하는데 활용할 수 있다.