• Korean Journal of Materials Research
• /
• v.20 no.12
• /
• pp.649-653
• /
• 2010

In this paper, double texturization of multi crystalline silicon solar cells was studied with laser and reactive ion etching (RIE). In the case of multi crystalline silicon wafers, chemical etching has problems in producing a uniform surface texture. Thus various etching methods such as laser and dry texturization have been studied for multi crystalline silicon wafers. In this study, laser texturization with an Nd:$YVO_4$ green laser was performed first to get the proper hole spacing and $300{\mu}m$ was found to be the most proper value. Laser texturization on crystalline silicon wafers was followed by damage removal in acid solution and RIE to achieve double texturization. This study showed that double texturization on multi crystalline silicon wafers with laser firing and RIE resulted in lower reflectance, higher quantum yield and better efficiency than that process without RIE. However, RIE formed sharp structures on the silicon wafer surfaces, which resulted in 0.8% decrease of fill factor at solar cell characterization. While chemical etching makes it difficult to obtain a uniform surface texture for multi crystalline silicon solar cells, the process of double texturization with laser and RIE yields a uniform surface structure, diminished reflectance, and improved efficiency. This finding lays the foundation for the study of low-cost, high efficiency multi crystalline silicon solar cells.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2007.04a
• /
• pp.99-100
• /
• 2007

유도결합 플라즈마(ICP)를 이용한 CVD 장치에서 플라즈마를 발생시키기 위한 안테나의 구조는 매우 중요하다. 전자 온도와 전자 밀도에 직접적인 영향을 주게 되며, 뿐만 아니라 증착 물질의 두께 균일도에 결정적인 역할을 하게 된다. 본 연구에서는 플라즈마 특성 균일도 최적화를 위하여 2turn 직렬, 병렬, 혼합의 ICP 안테나의 구조에 대하여 플라즈마 특성 및 $SiO_2$ CVD 증착 특성을 계산하였다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2012.05a
• /
• pp.346-346
• /
• 2012

탄소 탄소 복합재료(C/C Composites)는 모재의 성분이 탄소로 구성되어 있어 약 $500^{\circ}C$이상의 산화분위기에서는 쉽게 산화되는 결점을 가지고 있다. 본 연구에서는 내산화성을 향상시키기 위한 방법으로서 Plasma Spray 코팅방법을 사용하여 다층 코팅막을 형성시킨 후 $1500^{\circ}C$에서 10시간동안 산화시험을 하였다.

• Journal of Environmental Science International
• /
• v.14 no.11
• /
• pp.1005-1014
• /
• 2005

The purpose of this research was to present multi-criteria which were related to the heat island and find methods which decreased heat island affection on the ecological landscape planning. The results of this study were as follows. According to the analysis of surface temperatures, the first grade was the outside-city like a mountain and its temperature was less than $13.0^{\circ}C$. The fifth grade was the downtown, industrial area and its temperature was more than $26.9^{\circ}C$. Therefore, the result was seen the serious heat-island effect. The results of field survey, the closer to the first grade, the higher the value of green coverage. The closer to the fifth grade, the higher the value of impermeability surface, paving materials and colors. According to the correlation analysis, the temperature had high correlation with impermeability surface, paving materials and colors. According to the simple regression analysis, permeability surface, green coverage, topography, impermeability surface, paving materials f: colors, human impact related with surface temperatures. To plan for the decrease of Heat-Island Effect needed the extension of green space, decrease of impermeability surface. This research suggested data for urban green plan and decrease of heat island effect, but there was a limit to get the objective method for grade classification because of lacking in the basic data, the research of multi-criteria will be accomplished continuously.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.253-260
• /
• 2012

Target detection is very difficult with complex clutters in IRST(Infrared Search and Track) system for a long distance target. Especially sea-clutter and ocean-surface with non-uniform temperature distribution make it difficult to detect incoming targets in images obtained in sea environment. In this paper, we propose a novel method based on morphological method for estimation of ocean surface with non-uniform temperature flow. In order to estimate the exact ocean surface temperature flow, we divided it into upper and lower bound flow. And after estimating it, the final ocean surface temperature flow is derived by a mean value of the estimated results. Also, we apply the multi-weighted technique with a variety of sizes of structure elements to overcome sub-sampling effect by using morphology method. Experimental results for ocean surface images acquired from many different environments are compared with results of existing method to verify the performance of the proposed methods.

• Structural Engineering and Mechanics
• /
• v.11 no.3
• /
• pp.259-272
• /
• 2001

The impact behavior of a multigirder concrete bridge under single and multiple moving vehicles is studied based on correlated road surface characteristics. The bridge structure is modeled as grillage beam system. A 3D nonlinear vehicle model with eleven degrees of freedom is utilized according to the HS20-44 truck design loading in the American Association of State Highway and Transportation Officials (AASHTO) specifications. A triangle correlation model is introduced to generate four classes of longitudinal road surface roughness as multi-correlated random processes along deck transverse direction. On the basis of a correlation length of approximately half the bridge width, the upper limits of impact factors obtained under confidence level of 95 percent and side-by-side three-truck loading provide probability-based evidence for the evaluation of AASHTO specifications. The analytical results indicate that a better transverse correlation among road surface roughness generally leads to slightly higher impact factors. Suggestions are made for the routine maintenance of this type of highway bridges.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.05a
• /
• pp.214.1-214.1
• /
• 2011

In this work, the electrochemical properties of the surface treated multi-walled carbon nanotubes (MWNTs) are investigated for supercapacitors. Nitrogen- and oxygen functional groups containing MWNTs are prepared by nitrogen precursors and acidic treatment, respectively. The surface properties of the MWNTs are confirmed by X-ray photoelectron spectroscopy (XPS) and Zeta-potential measurements. The electrochemical properties of the MWNTs are investigated by cyclic voltammetry, impedance spectra, and charge-discharge cycling performance in 1 M $H_2SO_4$ at room temperature. As a result, these functionalized MWNTs lead to an increase in the specific capacitance as compared with the pristine MWNTs. It proposes that the pyridinic and pyridinic-N-oxides nitrogen species influence on the specific capacitance due to their positive charges, and thus an improved electron transfer at high current loads, since they are the most important functional groups affecting capacitive behaviors.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.7
• /
• pp.108-115
• /
• 1997

In this paper, an algorithm of computing interference-free tool approach directions(visibility cone) with consideration of tool volume at an arbitrary point of a sculptured surface is developed. The surface is first approximated into a polyhedron with smaller subpatches and the tool approach directions are evenly sampled so as to test accessibility. Then the visibility cone is computed by testing if each approach direction is interfered by other surface subpatches. The results are represented as the binary spherical map which transform geometric information on sphere into aogebraic one. The developed algorithm is implemented and tested by several sculptured surfaces, convincing it can be easily used as a tool for not only interference- free tool approach directions but also determining process planning of multi-axis NC machining of sculp- tured surfaces

• Korean Institute of Interior Design Journal
• /
• v.13 no.6
• /
• pp.66-73
• /
• 2004

There has been preconceived assumption that, in good architecture, exterior and interior have to be harmoniously related to each other. However, in contemporary architecture, it is easy to witness that this harmonious relationship between exterior and intoner is severely challenged and various exterior surfaces have multi-faceted roles. Rem Koolhaas explained this sort of new situation in the light of 'lobotomy' that is a surgical method for mental disorders, based on the high-rise buildings in the early Manhattan. This study is started with the Rem Koolhaas' lobotomy concept and how this concept is applied to his projects. The multiple roles of exterior surface can be also found in many contemporary architects' projects. Among them, Jacques Herzog & Pierre do Neuron and Toyo Ito's recent projects are discussed to further analyze the new roles of surface and compared with Rem Koolhaas' case. Although the architects discussed present very limited scope of what is happening on the surface of comtemporary architecture, it is hoped to disclose some examples of new relationship between exterior and interior.

• 한국정보디스플레이학회:학술대회논문집
• /
• 2002.08a
• /
• pp.689-691
• /
• 2002

Well-aligned multi-wall carbon nanotubes (MWCNTs) have been grown on both Coming glass and silicon substrates at about 400 $^{\circ}C$ by a modified plasma - enhanced chemical vapor deposition system. We have investigated laser irradiation effect on carbon nanotube surface by using an ultra - violet laser. The laser operated to modify structural defect of was carbon nanotube and to ablate possible contamination of carbon nanotube surface. The morphology and surface transformation of MWCNTs as analyzed by a SEM. In addition, the field emission measurement was also carried out in a vacuum chamber with a $10^{-7}$ Torr base pressure by applying bias voltages up to 1000V.