• 드라이브 ㆍ 컨트롤
• /
• 제20권3호
• /
• pp.25-34
• /
• 2023

In this study, we conducted a research on optimizing the spraying performance of agricultural drones and predicted the spraying performance in various flight conditions using the multi-layer perceptron (MLP). Data was collected using a test device for pesticide spraying performance according to the water sensitive paper (WSP) evaluation. MLP training involved supervised learning to achieve a coefficient of variation (CV), which indicates the degree of uniform spraying. The performance evaluation was conducted using R-squared (R²), the test samples showed an R² of 0.80. The results of this study showed that drone spraying performance can be predicted under various flight environments. In addition, the correlation analysis between flight conditions and predicted spraying performance will be useful for further research on optimizing the spraying performance of agricultural drones.

• 대한본초학회지
• /
• 제28권4호
• /
• pp.71-76
• /
• 2013

Objectives : The biological activities and compound contents of herbal medicine vary depending on manufacturing processes. In this study, we compared anti-inflammatory effects and compound contents of three kinds of multi-herbal extract HT008 produced by different manufacturing processes in order to determine chemical and biological equivalence. Methods : HT008 was produced by three different manufacturing methods: 1. Freeze dried extract of Eleutherococcus senticosus, Scutellaria baicalensis and Angelica sinensis (HT008 FD), 2. Spray dried extract of E. senticosus and S. baicalensis combined with reflux extract of A. sinensis (HT008 SD), 3. Spray dried extract of E. senticosus and S. baicalensis combined with supercritial fluid extract of A. sinensis (HT008 SF). Anti-inflammatory effects were evaluated using acetic acid induced pain model and ${\lambda}$-carageenan induced paw edema model. Compound contents were evaluated by HPLC quantitative analysis of standard compounds of HT008, eleutheroside E, baicalin, z-ligustilide. Results : HT008 FD, HT008 SD and HT008 SF significantly decreased acetic acid induced pain index and ${\lambda}$-carrageenan induced paw edema volume compared with that of control group. There was no significant difference in efficacy among the HT008 FD, HT008 SD and HT008 SF. Standard compound contents of HT008 FD, HT008 SD and HT008 SF were quantified within the range of Korean pharmacopoeia or other research. Conclusions : Three different manufacturing methods of multi-herbal extracts have been developed without noticeable difference in the efficacy or compound contents. The results might be used to establish manufacturing process and industrialization of herbal extracts.

• 한국자동차공학회논문집
• /
• 제20권3호
• /
• pp.106-112
• /
• 2012

Since air pollution problem by emissions from automotive vehicles has become social issues, lean-burn gasoline direct injection (GDI) engine is focused as an alternative to meet the requirement of reinforced emission regulation and improved fuel consumption. Spray-guided type DI combustion is promising technology, which characterized by the centrally mounted injector and closely positioned spark plug, since stable lean combustion can be realized even at ultra-lean mixture condition. In the present study, the effect of multi-ignition with developed charge coil on combustion and emission characteristics was investigated in optical accessible single cylinder engine. In order to fully understand the in-cylinder phenomena and the mechanisms of emission production, optical diagnostics, such as flame visualization was also carried out at frequently using operating condition. Multi-ignition is effective to improve fuel economy but increase NOx emission at flammability limit.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.1017-1026
• /
• 2014

Urea-SCR 머플러 시스템 입구와 촉매 전단에 설치된 다공튜브는 우레아 수용액 분무의 균일분포, SCR 촉매 활용도 증대 및 암모니아 슬립을 방지하기 위해 사용되고 있다. 다공튜브의 오리피스 면적비 변화가 머플러 챔버 내부유동 특성에 끼치는 영향이 상용 소프트웨어를 이용하여 해석적으로 조사되었다. 다공튜브 오리피스 면적비 변화는 촉매 전단에 설치된 챔버 내부의 벌크 선회유동 형성과 촉매 전단 속도분포의 균일도 지수에 큰 영향을 끼침을 보였다. 해석결과를 검증하기 위해 엔진실험이 ESC 및 ETC 모드에서 수행되었다. 엔진 실험결과 다공튜브 길이방향으로 보다 많은 유량이 흐르는 모델이 가장 높은 NOx 저감 효율을 나타냈으며, 이것은 높은 균일도지수 및 강한 선회유동을 나타내는 해석 결과와 일치됨을 알 수 있었다.

• 한국분무공학회지
• /
• 제15권2호
• /
• pp.83-93
• /
• 2010

Feedwater heaters of many nuclear power plants have recently experienced severe wall thinning damage, which will increase as operating time progresses. Several nuclear power plants in Korea have experienced wall thinning damage in the area around the impingement baffle inside feedwater heater installed downstream of the turbine extraction stream line. At that point, the extract steam from the turbine is two phase fluid at high temperature, high pressure, and high speed. Since it flows to reverse direction after impinging the impingement baffle, the shell wall of feedwater heaters may be affected by flow-accelerated corrosion. In this paper, to compare degree of shell wall thinning mitigation rate to squared type with mitigation rate of other type baffle plate, four different types of impingement baffle plate-squared, curved, mitigating type and multi-hole type-applied inside the shell. With these comparison data, this paper describes operation of experiments and numerical analysis which is composed similar condition with real feed water heater. And flow visualization is operated for verification of experiments and numerical analysis. In conclusion, this study shows that mitigating type and multi-hole type baffle plate are more effective than other baffle plate about prevention of pressure concentration and pressure value decrease.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2004년도 추계학술대회논문집
• /
• pp.245-251
• /
• 2004

This paper is studied on the effect of TiAlN coated Ball End Mill and MQL(Minimum Quantity Lubrication) cutting condition on cutting characteristic of high hardness steels. KP4 steels[HRC32] and STD11[HRC60] heat treated steels were used as the workpiece and WC-Co ball end mill and single and multi layer TiAlN coated ball end mill were utilized in the cutting tests. MQL device was used to spray botanical oil coolant. Result showed that TiAlN coated ball end mill were increased the cutting length than WC-Co ball end mill in the cutting speed[$245{\sim}320m/min$] about $2.3{\sim}5.7$ times for KP4 steels and about $2.5{\sim}4.3$ times far STD11 heat treated steels. The multi layer TiAlN coated ball end mill is good for KP4 steels than single layer coated.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.597-602
• /
• 2008

The experiment of performance about closed-wet cooling tower(CWCT) was conducted in this study. The test section has the cooling water that flows from top part of a heat exchanger that has an entrance of cooling water with one and multi path. The heat exchanger consists of 15.88mm tubes with ten rows and ten columns and staggered arrangement. In this experiment, heat and mass transfer coefficients and range are calculated with variations of cooling water and path. The results indicated that operating CWCT using two path have the high values of heat and mass transfer coefficients and range than one path.

• 한국분무공학회지
• /
• 제9권4호
• /
• pp.38-45
• /
• 2004

This study describes the analysis results of unsteady cavitating flows behavior inside nozzle of the prototype piezo-driven injector. This piezo-driven injector has been recognised as one of the next generation diesel injector due to a higher driven efficiency than the conventional solenoid-driven injector. The three dimensional geometry model along the central cross-section regarding of one injection hole has been used to simulate the cavitating flows for injection time by at fully transient simulation with cavitation model. The cavitation model incorporates many of the fundamental physical processes assumed to take place in cavitating flows. The simulations performed were both fully transient and 'pseudo' steady state, even if under steady state boundary conditions. We could analyze the effect the pressure drop to the sudden acceleration of fuel, which is due to the fastest response of needle, on the degree of cavitation existed in piezo-driven injector nozzle

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2010년도 제34회 춘계학술대회논문집
• /
• pp.95-98
• /
• 2010

본 연구에서는 고농도 과산화수소와 케로신을 산화제와 연료로 사용하는 다중 인젝터 액체로켓엔진을 설계, 제작하였고 수류시험을 수행하였다. 이 엔진에는 6개의 동축 선회형 인젝터를 사용하였으며, 유동해석 결과를 바탕으로 정체 구간과 재순환 영역을 최소화한 매니폴드 유로를 설계, 제작하였다. 최종적으로 수류실험을 통해 추진제의 공급 유량 및 분무 성능을 확인하였으며, 인젝터의 설계 타당성을 검증하였다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.455-456
• /
• 2007

Optically transparent, highly conductive coating have been major theme of thin film science efforts for some years. In this work, t-MWNT(thin Multi-walled Carbon Nanotubes) are acid treated, then the stable dispersion of t-MWNTs in polar solvent such as alcohols, was achieved by sonication. The transparent conducting films are prepared using the one component solution of t-MWNT/epoxy binder via spray coating on glass substrate. The characterization of acid treated t-MWNTs was performed by Raman spectrometer. The opto-electrical properties of conducting films are analyzed by the binder concentration, and the effect of co-solvent on the compatibility and dispersibility of one component t-MWNT/epoxy binder solutions are discussed.