• 한국항공우주학회지
• /
• 제41권1호
• /
• pp.17-24
• /
• 2013

본 논문에서는 복합재료의 미시적 파손모드를 고려하는 복합재 파손예측 프로그램을 개발하였다. 개발된 프로그램의 검증을 위하여 원공이 있는 복합재 적층판 시편의 인장시험 및 정적 파손해석을 수행하였다. 먼저 적층각도별 복합재 시편에 대한 인장시험을 통하여 논문에 사용된 재료에 대한 SIFT 허용치를 산출하였고, 미시역학적 모델인 RVE에 대한 유한요소 해석을 통하여 변형률 증폭계수를 결정하였다. 또한 원공이 있는 복합재 적층판 시편에 대한 인장시험을 수행하고, 실험을 통해 얻어진 파손하중 결과를 바탕으로 유한요소 모델에 대하여 정적 파손해석을 수행하였다. 마지막으로 실험결과를 바탕으로 예측된 파손지수 결과를 평가함으로써 개발된 프로그램의 효용성을 검증하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권8호
• /
• pp.3602-3620
• /
• 2016

Dynamic topology is one of the main influence factors on network performability. However, it was always ignored by the traditional network performability assessment methods when analyzing large-scale mobile ad hoc networks (MANETs) because of the state explosion problem. In this paper, we address this problem from the perspective of complex network. A two-layer hierarchical modeling approach is proposed for MANETs performability assessment, which can take both the dynamic topology and multi-state nodes into consideration. The lower level is described by Markov reward chains (MRC) to capture the multiple states of the nodes. The upper level is modeled as a small-world network to capture the characteristic path length based on different mobility and propagation models. The hierarchical model can promote the MRC of nodes into a state matrix of the whole network, which can avoid the state explosion in large-scale networks assessment from the perspective of complex network. Through the contrast experiments with OPNET simulation based on specific cases, the method proposed in this paper shows satisfactory performance on accuracy and efficiency.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2005년도 춘계공동학술대회 발표논문
• /
• pp.1033-1039
• /
• 2005

Parallel and distributed simulation is concerned with the efficient execution of large-scale discrete event simulation models on multiprocessors and distributed platforms. After the development of WWW, many efforts in the parallel and distributed simulation have been made for modeling, particularly building simulation languages and creating model libraries that can be assembled and executed over WWW. However, web-based parallel and distributed simulation is restricted by heterogeneous computing environments. Recently, the advent of XML and web services technology has made these efforts enter upon a new phase. Especially, the web services as a distributed information technology have demonstrated powerful capabilities for scalable interoperation of heterogeneous systems. This paper aims to develop and evaluate the parallel and distributed simulation using the web services technology. In particular, a prototype multi-pass simulation framework is implemented using Java-based web services technology. It focuses on the efficiency of multi-pass simulation used for optimization through the distribution of simulation replication to several simulation service providers. The development of parallel and distributed simulation using web services will help solve efficiently large-scale problems and also guarantee interoperability among heterogeneous networked systems.

• 한국군사과학기술학회지
• /
• 제25권2호
• /
• pp.196-209
• /
• 2022

Driving dynamic characteristics of semi-trailer loaded with precise equipments are very important to protect them from vibration, impact or other disturbances. In this paper, in order to identify the driving dynamic characteristics of the large scale semi-trailer equipped with swivel axle and hydropneumatic suspension unit, Dynamics Modeling & Simulation(M&S) were performed using general Dynamics Analysis Program(RecurDyn V9R2). The semi-trailer was modeled as two types - one is Multi Rigid Body Dynamics(MRBD) model, and the other Rigid-Flexible Body Dynamics(RFlex) one. The natural vibration mode and frequencies of semi-trailer body, acceleration of dummy-weight, pitch, roll and yaw of dummy-weight, swivel axle and hydropneumatic suspension cylinder support structure, and acting force of hydropneumatic suspensions etc. were obtained from the M&S. Additionally frequency analysis were performed using the data of behavior obtained from above M&S. Generally the quantitative results of RFlex are larger than them of MRBD in view of magnitude of the comparable parametric values.

• 한국지구과학회지
• /
• 제33권5호
• /
• pp.401-407
• /
• 2012

The OGS model is configured and used for simulation of the LASGIT project. The modeling conditions and the simulation results from the previous work by Walsh and Calder (2009) are analyzed to see if the simulation configuration is done correctly and to apply for the LASGIT project. Except for the unrealistic modeling conditions used previously, the simulation results successfully demonstrated helium propagation that is typical for the two-phase flow. The results indicated that the relations of capillary pressure and the relative permeability against water saturation used previously should be updated. An elaborated simulation with more realistic parameters should be used to improve the weak points of preliminary work.

• 한국연소학회:학술대회논문집
• /
• 한국연소학회 2006년도 제32회 KOSCO SYMPOSIUM 논문집
• /
• pp.49-54
• /
• 2006

The present study conducted a numerical modeling on the diesel SCR (selective catalytic reduction) system using ammonia as a reductant over vanadium-based catalysts $(V_2O_5-WO_3/TiO_2)$. Transient modeling for ammonia adsorption/desorption on the catalyst surface was firstly carried out, and then the SCR reaction was modeled considering for it. In the current catalytic reaction model, we extended the pure chemical kinetic model based on laboratory-scale powdered-phase catalyst experiments to the chemico-physical one applicable to realistic commercial SCR reactors. To simulate multi-dimensional heat and mass transfer phenomena, the SCR reactor was modeled in two dimensional, axisymmetric domain using porous medium approach. Also, since diesel engines operate in transient mode, the present study employed an unsteady model. In addition, throughout simulations using the developed code, effects of space velocity on the DeNOx performance were investigated.

• 한국측량학회지
• /
• 제35권4호
• /
• pp.313-318
• /
• 2017

Land surface temperature is essential for monitoring abnormal climate phenomena such as UHI (Urban Heat Islands), and for modeling weather patterns. However, the quality of surface temperature obtained from the optical space imagery is affected by many factors such as, revisit period of the satellite, instance of capture, spatial resolution, and cloud coverage. Landsat 8 imagery, often used to obtain surface temperatures, has a high resolution of 30 meters (100 meters rearranged to 30 meters) and a revisit frequency of 16 days. On the contrary, MODIS imagery can be acquired daily with a spatial resolution of about 1 kilometer. Many past attempts have been made using both Landsat and MODIS imagery to complement each other to produce an imagery of improved temporal and spatial resolution. This paper applied machine learning methods and performed downscaling which can obtain daily based land surface temperature imagery of 30 meters.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2001년도 춘계학술대회 논문집
• /
• pp.58-65
• /
• 2001

Many changes in the railway environment has directly affected to the railway company. To cope immediately with the influence of environment and to promote productivity, the railway company has to introduce an efficient train operation system and related core technologies. The railway system is composed or large-scale infrastructures ann high-cost trains. Simulation method is one or core technologies and also is efficient tool for planning and analyzing this kind of complex system. The purpose of this research is to develop multi-train traffic simulator considering high-speed train for GyongBu-Line. To achieve this objective, the elements of railway system was analyzed, and as a result, a data structure modeling for the railway system such as rail-Tine infrastructure, rain, timetable and operational route is presented. The developed simulator is composed of three major part : input-module, main-module, and output module. The concept and brief explanation of each module will be treated.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.542-546
• /
• 2004

Fully non-local Quasicontinuum method using sub-divided region with Hermite interpolation function is proposed for simulation of carbon nanotube. Tersoff-Brenner potential is adopted for interaction of bonded atoms and also van der Waals force for non-bonded interaction. Bending of single wall carbon nanotube with chirality (20,0) and 15nm length is simulated up to 90 degree. Bending of double wall carbon nanotube with chirality (20,0) and (12,0) is simulated up to 65 degree. Bending of four wall carbon nanotube is simulated up to 45 degree.

• Journal of Electrical Engineering and Technology
• /
• 제9권3호
• /
• pp.848-858
• /
• 2014

In this paper the construction of a model that represents the behavior of an Electric Vehicle is described. Both the mechanical and the electric traction systems are represented using Multi-Bond Graph structural approach suited to model large scale physical systems. Then the model of the controllers, represented with a functional approach, is included giving rise to an integrated model which exploits the advantages of both approaches. Simulation and experimental results are aimed to illustrate the electromechanical interaction and to validate the proposal.