• 한국전산유체공학회:학술대회논문집
• /
• 2006.05a
• /
• pp.268-270
• /
• 2006

• Journal of Computational Design and Engineering
• /
• v.3 no.3
• /
• pp.179-190
• /
• 2016

A kind of modified epoxy resin sheet molding compounds of the impeller has been designed. Through the test, the non-metal impeller has a better environmental aging performance, but must do the waterproof processing design. In order to improve the stability of the impeller vibration design, the influence of uncertainty factors is considered, and a multi-objective robust optimization method is proposed to reduce the weight of the impeller. Firstly, based on the fluid-structure interaction, the analysis model of the impeller vibration is constructed. Secondly, the optimal approximate model of the impeller is constructed by using the Latin hypercube and radial basis function, and the fitting and optimization accuracy of the approximate model is improved by increasing the sample points. Finally, the micro multi-objective genetic algorithm is applied to the robust optimization of approximate model, and the Monte Carlo simulation and Sobol sampling techniques are used for reliability analysis. By comparing the results of the deterministic, different sigma levels and different materials, the multi-objective optimization of the SMC molding impeller can meet the requirements of engineering stability and lightweight. And the effectiveness of the proposed multi-objective robust optimization method is verified by the error analysis. After the SMC molding and the robust optimization of the impeller, the optimized rate reached 42.5%, which greatly improved the economic benefit, and greatly reduce the vibration of the ventilation system.

• Journal of the Korean Institute of Gas
• /
• v.1 no.1
• /
• pp.33-40
• /
• 1997

An optimization system, APROGA II using genetic algorithm, was developed to solve multi-modal and multiobjective problems. To begin with, Multi-Niche Crowding(MNC) algorithm was used for multi-modal optimization problem. Secondly, a new algorithm was suggested for multiobjective optimization problem. Pareto dominance tournaments and Sharing on the non-dominated frontier was applied to it to obtain multiple objectives. APROGA II uses these two algorithms and the system has three search engines(previous APROGA search engine, multi-modal search engine and multiobjective search engine). Besides, this system can handle binary and discrete variables. And the validity of APROGA II was proved by solving several test functions and case study problems successfully.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.17 no.4
• /
• pp.1100-1122
• /
• 2023

Scheduling user-submitted cloud tasks to the appropriate virtual machine (VM) in cloud computing is critical for cloud providers. However, as the demand for cloud resources from user tasks continues to grow, current evolutionary algorithms (EAs) cannot satisfy the optimal solution of large-scale cloud task scheduling problems. In this paper, we first construct a large- scale multi-objective cloud task problem considering the time and cost functions. Second, a multi-objective optimization algorithm based on multi-factor optimization (MFO) is proposed to solve the established problem. This algorithm solves by decomposing the large-scale optimization problem into multiple optimization subproblems. This reduces the computational burden of the algorithm. Later, the introduction of the MFO strategy provides the algorithm with a parallel evolutionary paradigm for multiple subpopulations of implicit knowledge transfer. Finally, simulation experiments and comparisons are performed on a large-scale task scheduling test set on the CloudSim platform. Experimental results show that our algorithm can obtain the best scheduling solution while maintaining good results of the objective function compared with other optimization algorithms.

• 한국전산유체공학회:학술대회논문집
• /
• 2003.10a
• /
• pp.240-242
• /
• 2003

A method for performing two-dimensional lift-constraint drag minimization in inviscid compressible flows on unstructured meshes is developed. Sensitivities of objective function with respect to the design variables are efficiently obtained by using a continuous adjoint method. In addition, parallel algorithm is used in multi-point design optimization to enhance the computational efficiency. The characteristics of single-point and multi-point optimization are examined, and the comparison of these two method is presented.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.4
• /
• pp.64-73
• /
• 1992

This paper presents the design of multi-level logic optimization algorithm and the development of the SMILE system based on the algorithm. Considering the fanin constraints in algorithmic level, SMILE performs global and local optimization in a predefined sequence using heuristic information. Designed under the Sogang Silicon Compiler design environment, SMILE takes the SLIF netlist or Berkeley equation formats obtained from high-level synthesis process, and generates the optimized circuits in the same format. Experimental results show that SMILE produces the promising results for some circuits from MCNC benchmarks, comparable to the popularly used multi-level logic optimization system, MIS.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.43 no.7
• /
• pp.601-608
• /
• 2015

The static aeroelastic analysis and optimization of flexible wings are conducted for steady state conditions while both aerodynamic and structural parameters can be used as optimization variables. The system of multidisciplinary design optimization as a robust methodology to couple commercial codes for a static aeroelastic optimization purpose to yield a convenient adaptation to engineering applications is developed. Aspect ratio, taper ratio, sweepback angle are chosen as optimization variables and the skin thickness of the wing. The real-coded adaptive range multi-objective genetic algorithm code, which represents the global multi-objective optimization algorithm, was used to control the optimization process. The support vector regression(SVR) is applied for optimization, in order to reduce the time of computation. For this multi-objective design optimization problem, numerical results show that several useful Pareto optimal designs exist for the flexible wing.

• Proceedings of the Korean Society for Quality Management Conference
• /
• 2006.11a
• /
• pp.133-138
• /
• 2006

The problem that we address is to determine the inventory stockage levels in a multi-echelon inventory system for repairable items in a multi-indenture system. We propose the simulation optimization approach to determine the stockage levels at each echelon, where a simulator for the underlying system is combined with an appropriate optimization tool, Genetic Algorithm (GA).

• Structural Engineering and Mechanics
• /
• v.72 no.2
• /
• pp.181-190
• /
• 2019

Topology optimization of structures seeking the best distribution of mass in a design space to improve the structural performance and reduce the weight of a structure is one of the most comprehensive issues in the field of structural optimization. In addition to structures stiffness as the most common objective function, frequency optimization is of great importance in variety of applications too. In this paper, an efficient multi-objective Bi-directional Evolutionary Structural Optimization (BESO) method is developed for topology optimization of frequency and stiffness in continuum structures simultaneously. A software package including a Matlab code and Abaqus FE solver has been created for the numerical implementation of multi-objective BESO utilizing the weighted function method. At the same time, by considering the weaknesses of the optimized structure in single-objective optimizations for stiffness or frequency problems, slight modifications have been done on the numerical algorithm of developed multi-objective BESO in order to overcome challenges due to artificial localized modes, checker boarding and geometrical symmetry constraint during the progressive iterations of optimization. Numerical results show that the proposed Multiobjective BESO method is efficient and optimal solutions can be obtained for continuum structures based on an existent finite element model of the structures.

• Smart Structures and Systems
• /
• v.14 no.1
• /
• pp.55-70
• /
• 2014

The paper presents a multi-objective optimization strategy for a multi-type sensor placement for Structural Health Monitoring (SHM) of long span bridges. The problem is formulated for simultaneous placement of strain sensors and accelerometers (heterogeneous network) based on application demands for SHM system. Modal Identification (MI) and Accurate Mode Shape Expansion (AMSE) were chosen as the application demands for SHM. The optimization problem is solved through the use of integer Genetic Algorithm (GA) to maximize a common metric to ensure adequate MI and AMSE. The performance of the joint optimization problem solved by GA is compared with other established methods for homogenous sensor placement. The results indicate that the use of a multi-type sensor system can improve the quality of SHM. It has also been demonstrated that use of GA improves the overall quality of the sensor placement compared to other methods for optimization of sensor placement.