• 제목/요약/키워드: Multi-Objectives

검색결과 772건 처리시간 0.028초

방제의 본초 중량비를 활용한 방제 비교 방안에 관한 연구 (A Study on the Comparative Method of Prescription Using Herb Weight Ratio)

  • 박대식;이부균;이병욱
    • 대한한의학방제학회지
    • /
    • 제21권2호
    • /
    • pp.121-132
    • /
    • 2013
  • Objectives : The objectives of this study is to establish data-base to find out similar herbal formulas with a particular herbal formula by comparing composition ratio of configuring herbs. And this thesis is to analyze differences of prescriptions and find out similar prescriptions by utilizing galenical mass ratio, which is directly related to effectiveness of galenical. Methods : This study was proceeded by using Access 2007 with Window 7(MS) and 2,787 prescriptions of which herbal configuration could be indicated by weight unit were analysed from Donguibogam. We standardize all units of the prescription and input the mass ratio data when entered galenical data. Results : We could confirm a degree of similarity between compared prescriptions and a particular prescription according to the sum of differences of herb weight ratio and similarity ratio. Conclusions : A most similar herbal formula could be searched through comparing multi prescriptions by multi prescriptions of herbal configuration from established herbal formula data-base where herb weight ratio of prescriptions is to be input.

배전계통에서 부하불평형을 고려한 분산형 전원의 운영 계획 (Planning for Operation of Dispersed Generation Systems considering Load Unbalance in Distribution Systems)

  • 이유정;유석구
    • 조명전기설비학회논문지
    • /
    • 제17권5호
    • /
    • pp.118-125
    • /
    • 2003
  • 본 연구에서는 배전계통에서 부하불평형을 고려한 분산형 전원의 운영에 대한 계획을 제안하였다. 또한, 배전계통의 실제 부하구성 분포를 고려하기 위하여 부하모형은 가정용, 산업용, 상업용, 사무용 및 농업용 부하 등의 집단 부하로 모형화 하였다. 또한, 목적함수로는 계통 유효전력손실을 사용하였고 분산형전원의 수 또는 총용량 및 모선 전압을 제약조건으로 정식화하였으며, 이 목적함수와 제약조건에 대한 부정확한 성질을 평가하기 위하여 퍼지 Goal Programing으로 모델링 하였으며, GA를 사용하여 최적해를 탐색하였다.

GIS기반 의사결정지원시스템을 이용한 부산 대기질 측정망의 최적화 (Optimization of Air Quality Monitoring Networks in Busan Using a GIS-based Decision Support System)

  • 유은철;박옥현
    • 한국대기환경학회지
    • /
    • 제23권5호
    • /
    • pp.526-538
    • /
    • 2007
  • Since air quality monitoring data sets are important base for developing of air quality management strategies including policy making and policy performance assessment, the environmental protection authorities need to organize and operate monitoring network properly. Air quality monitoring network of Busan, consisting of 18 stations, was allocated under unscientific and irrational principles. Thus the current state of air quality monitoring networks was reassessed the effect and appropriateness of monitoring objectives such as population protection and sources surveillance. In the process of the reassessment, a GIS-based decision support system was constructed and used to simulate air quality over complex terrain and to conduct optimization analysis for air quality monitoring network with multi-objective. The maximization of protection capability for population appears to be the most effective and principal objective among various objectives. The relocation of current monitoring stations through optimization analysis of multi-objective appears to be better than the network building for maximization of population protection capability. The decision support system developed in this study on the basis of GIS-based database appear to be useful for the environmental protection authorities to plan and manage air quality monitoring network over complex terrain.

A multi-level approach for the optimization of an ultrafiltration plant processing surface water

  • Zondervan, E.;Roffel, B.
    • Membrane and Water Treatment
    • /
    • 제1권1호
    • /
    • pp.61-74
    • /
    • 2010
  • This paper will integrate models at different levels (from filtration, backwashing to chemical cleaning and membrane lifetime) that can be used to minimize overall operating costs of a dead-end ultra filtration process that is used for the purification of surface water. Integration of the models leads to a multi-level optimization problem (at different levels different objectives should be reached). This problem is solved as a MINLP. Systematic modelling and optimization of membrane systems is not extensively discussed in the scientific literature. In this paper the first steps are taken in the formulation of proper models and the use of systems engineering tools to come to real optimal operating conditions. The optimized variables are used to calculate fouling profiles which can subsequently be used as inputs for a control system that actually enforces the profiles to a real pilot plant.

Fuzzy 다목적 선형계획법을 이용한 최적 무효전력 배준계획에 관한 연구 (A Study on the Optimal VAR planning Using Fuzzy Linear Progamming with Multi-criteria Function)

  • 송길영;이희영
    • 대한전기학회논문지
    • /
    • 제41권9호
    • /
    • pp.984-993
    • /
    • 1992
  • Fuzzy L.P. with Multi-criteria function is adopted in this VAR planning algorithm to accomplish the optimization of comflicting objectives, such as the amount of the VAR installed and power system loss, while keeping the bus voltage profile within an admissible range. Fuzzy L.P. with Multi-criteria function, a powerful tool dealing with the fuzziness of satisfaction levels of the constraints and the goal of objective functions, enables us to search for the solutions which may contribute in VAR planning. This advantage is not provided by traditional standardized L.P. The effectiveness of the proposed algorithm has been verified by the test on the IEEE-30 bus system.

  • PDF

다목적 유전자 알고리즘을 이용한 SVC와 외부 리액터/커패시터 뱅크의 헙조 제어 (Coordination of SVC and External Reactor/Capacitor Banks Using Multi-objective)

  • 박종영;이상호;박종근;손광명;이송근
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2000년도 하계학술대회 논문집 A
    • /
    • pp.233-235
    • /
    • 2000
  • SVC(Static Var Compensator) is commonly installed with conventional mechanically switched existing reactor or capacitor banks for wide range voltage control. The frequencies of switching of external banks have a great impact on the quality of voltage, but is limited since the life time of the external banks depends severely on the number of switching. So it is a complete multi-objective nonlinear optimization problem with conflicting objectives. This paper presents a method to determine the optimal coordination of SVC and external banks using genetic algorithm based on the multi-objective criteria. Optimal dead band and delay time of external banks is sought for reliable and efficient operation

  • PDF

계수조건부 LMI를 이용한 다목적 제어기 설계 (Multi-Objective Controller Design using a Rank-Constrained Linear Matrix Inequality Method)

  • 김석주;김종문;천종민;권순만
    • 제어로봇시스템학회논문지
    • /
    • 제15권1호
    • /
    • pp.67-71
    • /
    • 2009
  • This paper presents a rank-constrained linear matrix inequality (LMI) approach to the design of a multi-objective controller such as $H_2/H_{\infty}$ control. Multi-objective control is formulated as an LMI optimization problem with a nonconvex rank condition, which is imposed on the controller gain matirx not Lyapunov matrices. With this rank-constrained formulation, we can expect to reduce conservatism because we can use separate Lyapunov matrices for different control objectives. An iterative penalty method is applied to solve this rank-constrained LMI optimization problem. Numerical experiments are performed to illustrate the proposed method.

이진정수계획법을 사용한 복층숙소의 최적 방 배정문제 (Optimal Room Assignment Problem for Multi-floor Facility using Binary Integer Programming)

  • 이상원;임석철
    • 산업공학
    • /
    • 제21권2호
    • /
    • pp.170-176
    • /
    • 2008
  • Consider a multi-floor facility with multiple rooms of unequal size on each floor. Students come from many organizations to attend the conference to be held at this facility. In assigning the rooms to the students, several constraints must be met; such as boys and girls must not be assigned to the rooms on the same floor. Given the capacity of each room and the number of students from each organization, the problem is assigning students to rooms under a set of constraints and various objectives. We present six models with different objective functions; and formulate them as binary integer programming problems. A numerical example and a case study follow to illustrate the proposed models.

다축 CNC 시스템의 통합형 제어기 설계 (Integrated Controller Design for Multi-Axis CNC Systems)

  • 이학철;지성철
    • 한국정밀공학회지
    • /
    • 제23권5호
    • /
    • pp.93-102
    • /
    • 2006
  • This paper proposes a controller design analysis for three-axis CNC systems considering both contouring and tracking performance. The proposed analysis inclusively combines axial controllers for each individual feed drive system together with cross-coupling controller at the beginning design stage as an integrated manner. These two controllers used to be separately designed and analyzed since they have different control objectives. The proposed scheme includes a stability analysis for the overall control system and a performance analysis in terms of contouring and tracking accuracy. Computer simulation is performed and the results show the validity of the proposed methodology. Further, the results can be used as a basic guideline in systematic and comprehensive controller design for multi-axis CNC systems.

공적연금소득을 통한 가구형태가 삶의 만족에 미치는 영향 (Effects of Household Type by Public Pension Income Level on Life Satisfaction)

  • 최령;황병덕
    • 보건의료산업학회지
    • /
    • 제14권1호
    • /
    • pp.123-136
    • /
    • 2020
  • Objectives: This study aimed to analyze the factors influencing the life satisfaction of retirees(n=1,919) in one-person and multi-person households using the 2015 wave of the Korean Retirement and Income Study, collected by the National Pension Service. Methods: Frequency analysis and χ2-test were performed to examine the general characteristics and relation between one-person and multi-person household retirees. Logistic analysis was conducted to examine the factors affecting life satisfaction. Results: Public pension income was a statistically significant factor affecting life satisfaction, economic, health, and life in multi-person households. Conclusions: To improve life satisfaction after retirement, selective insurance benefits are needed depending on the type of household. Moreover a policy for expanding labor market participation is needed.