• International conference on construction engineering and project management
• /
• 2007.03a
• /
• pp.642-652
• /
• 2007

Many contracting firms and project managers in the construction industry have started to utilize multi objective optimization methods to handle multiple conflicting goals for completing the project within the stipulated time and budget with required quality and safety. These optimization methods have increased the pressure on decision makers to search for an optimal resources utilization plan that optimizes simultaneously the total project cost, completion time, and crashing cost by considering indirect cost, contractual penalty cost etc., practically charging them in terms of direct cost of the project which is fuzzy in nature. This paper presents a multiple fuzzy goal programming model (MFGP) that supports decision makers in performing the challenging task. The model incorporates the fuzziness which stems from the imprecise aspiration levels attained by the decision maker to these objectives that are quantified through fuzzy linear membership function. The membership values of these objectives are then maximized which forms the fuzzy decision. The problem is solved using LINGO 8 optimization solver and the best compromise solution is identified. Comparison between solutions of MFGP, fuzzy multi objective linear programming (FMOLP) and multiple goal programming (MGP) are also presented. Additionally, an interactive decision making process is developed to enable the decision maker to interact with the system in modifying the fuzzy data and model parameters until a satisfactory solution is obtained. A case study is considered to demonstrate the feasibility of the proposed model for optimization of project network parameters in the construction industry.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.11
• /
• pp.2052-2067
• /
• 2011

Complementary trees are two spanning trees rooted at the sink node satisfying that any source node's two paths to the sink node on the two trees are node-disjoint. Complementary trees routing strategy is a special node-disjoint multi-path routing approach. Several complementary trees routing algorithms have been proposed, in which path discovery methods based on depth first search (DFS) or Dijkstra's algorithm are used to find a path for augmentation in each round of path augmentation step. In this paper, a novel path discovery method based on multi-tree-growing (MTG) is presented for the first time to our knowledge. Based on this path discovery method, a complementary trees routing algorithm is developed with objectives of low average path length on both spanning trees and low complexity. Measures are employed in our complementary trees routing algorithm to add a path with nodes near to the sink node in each round of path augmentation step. The simulation results demonstrate that our complementary trees routing algorithm can achieve low average path length on both spanning trees with low running time, suitable for wireless sensor networks in industrial scenarios.

• Korean Journal of Health Education and Promotion
• /
• v.30 no.4
• /
• pp.57-67
• /
• 2013

Objectives: The purpose of this study was to explore coordination strategy through reviewing policies, action plans and acts related to diet, nutrition and obesity from many sectors in Korea, and to develop a possible multi-sectoral approach. Methods: Literature reviews and empirical findings for ongoing international and domestic policies/programs on diet, nutrition and obesity in Korea. Results: Central and local governments have various policies/programs and related acts to improve nutrition and to reduce obesity. Meanwhile, those governments' activities are frequently criticized to be more coordinated in order to achieve their aims. Activities on nutrition and obesity prevention have interdepartmental characteristics but are scattered through six Ministries (including the Ministry of Health and Welfare, Ministry of Education, Ministry of Agriculture, Ministry of Employment and Labor, Ministry of Culture and Sports, and Ministry of Food/Drug Safety) and 27 Acts such as 'Nutrition Management Act', 'Health Promotion Act', 'Diet Education Support Act'. As a result, a number of areas, especially dietary guidance, nationwide surveys, education programs seem to overlap. Conclusions: Inter-ministerial coordination mechanism should be established to enforce multi-sectoral engagement and cooperation in implementing policies/programs on nutrition and obesity prevention. Furthermore, functions of the Ministries should be reorganized and coordinated in reference to other countries' experiences.

• Journal of the Korean Society of Laryngology, Phoniatrics and Logopedics
• /
• v.13 no.2
• /
• pp.132-138
• /
• 2002

Background and Objectives : The complex physiologic structure of the larynx can vibrate in three or more different ways that yield acuostically and perceptually distinct vocal quality. The purpose of this study is to examine the normal range of voice parameters in Multi-Channel Phonatory Function Analyzer and investigate the difference of voice parameters according to the phonatory patterns. Materials and Methods : Forty normal adult speakers (20 men and 20 women) with age ranging from third to forth decades pronounce low, comfortable, and high tone /a/ ; comfortable tone /${\ae}$/, /i/, /o/, and /u/ : fry, falsetto. Voice was analyzed by Newly developed multi-channel phonatory function analyzer. Results : The normal range of voice parameters in this system was similar to the existing data. Fry shows high jitter and falsetto low SQ. Fry and falsetto show low OQ in men but no difference in women. Jitter, OQ and SQ were different between men and women in modal register, whereas there was no gender difference in fry and falsetto. In frequency magnitude spectrum and EGG, modal register, fry and falsetto have distinguishing pattern. Conclusions : Modal register, fry and falsetto are distinguishable in voice parameters and show different vibratory patterns.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03b
• /
• pp.113-116
• /
• 2008

This work presents numerical optimization for design of staggered arrays of dimples printed on opposite surfaces of a cooling channel with a fast and elitist Non-Dominated Sorting of Genetic Algorithm (NSGA-II) of multi-objective optimization. As Pareto optimal front produces a set of optimal solutions, the trends of objective functions with design variables are predicted by hybrid multi-objective evolutionary algorithm. The problem is defined by three non-dimensional geometric design variables composed of dimpled channel height, dimple print diameter, dimple spacing and dimple depth to maximize heat transfer rate compromising with pressure drop. Twenty designs generated by Latin hypercube sampling were evaluated by Reynolds-averaged Navier-Stokes solver and the evaluated objectives were used to construct Pareto optimal front through hybrid multi-objective evolutionary algorithm. The optimum designs were grouped by k-mean clustering technique and some of the clustered points were evaluated by flow analysis. With increase in dimple depth, heat transfer rate increases and at the same time pressure drop also increases, while opposite behavior is obtained for the dimple spacing. The heat transfer performance is related to the vertical motion of the flow and the reattachment length in the dimple.

• Restorative Dentistry and Endodontics
• /
• v.43 no.3
• /
• pp.29.1-29.13
• /
• 2018

Objectives: The aims of this study were to conduct a systematic review of the microtensile bond strength (${\mu}TBS$) of multi-mode adhesives to dentin and to perform a meta-analysis to assess the significance of differences in the ${\mu}TBS$ of one of the most commonly used universal adhesives (Scotchbond Universal, 3M ESPE) depending on whether the etch-and-rinse or self-etch mode was used. Materials and Methods: An electronic search was performed of MEDLINE/PubMed, ScienceDirect, and EBSCOhost. Laboratory studies that evaluated the ${\mu}TBS$ of multi-mode adhesives to dentin using either the etch-and-rinse or self-etch mode were selected. A meta-analysis was conducted of the reviewed studies to quantify the differences in the ${\mu}TBS$ of Scotchbond Universal adhesive. Results: Only 10 studies fulfilled the inclusion criteria for the systematic review. Extensive variation was found in the restorative materials, testing methodologies, and failure mode in the reviewed articles. Furthermore, variation was also observed in the dimensions of the microtensile testing beams. The meta-analysis showed no statistically significant difference between the etch-and-rinse and self-etch modes for Scotchbond Universal adhesive (p > 0.05). Conclusions: Multi-mode 'universal' adhesives can achieve substantial bonding to dentin, regardless of the used modes (either etch-and-rinse or self-etch).

• The Korea Journal of Herbology
• /
• v.23 no.3
• /
• pp.149-154
• /
• 2008

Objectives : The purpose of this study is to investigate the biological Effect of multi-herbal drug 'KOCO-P1' on human hepatocyte HepG2 cells. Methods : Multi-herbal drug 'KOCO-P1' was composed of Ginseng Radix, Astragali Radix, Polygonati Rhizoma, Liriopis Tuber, and Scrophulariae Radix. Cytotoxicity and cytoprotective activity of KOCO-P1 was verificated by MTT assay. And antioxidative effect of KOCO-P1 against EtOH, Nicotine was inspected by Hydroperoxide assay. Results : KOCO-P1 showed no cytotoxicity on HepG2 cells for 24, 48 hours. KOCO-P1 at 50 ${\mu}g/mL$ reduced the production of H2O2 in HepG2 cells by EtOH. KOCO-P1 at 50 ${\mu}g/mL$ reduced the production of $H_2O_2$ in $HepG_2$ cells by Nicotine. Conclusions : KOCO-P1 at the low concentration could be supposed to have antioxidative effect on human hepatocyte with no cytotoxicity.

• Korean Journal of Acupuncture
• /
• v.24 no.3
• /
• pp.33-45
• /
• 2007

Background : Hot flushes are general postmenopausal symptoms which about 75% of climacteric women undergo. They affect hotness, perspirations, systemic weakness, panic disorders, insomnia. Acupuncture is effective in alleviating hot flushes in practice. Assessment effectiveness and safety of acupuncture in hot flushes would be needed through multi-center trial. Objectives : Purpose of this study is to develope the protocol of effects of acupuncture on hot flushes, a postmenopausal symptom in climacteric women. Methods & Results : It will be a multi-centered, randomized, sham controlled, comparative trial. It will be performed by Good Clinical Practice after approval of Institutional Review Board. Selection criteria will be set according those of FDA above moderate degree. There will be a notice on concomitant medication, other herbs, dietary supplements. Superficial needling on sham points will be used for control group. Treatment period will be 8 weeks with 12 weeks' follow up. Some questionnaire scale will be used as the primary and secondary outcome. Conclusions : The clinical trials based on this protocol will be performed.

• Journal of the Architectural Institute of Korea Planning & Design
• /
• v.34 no.7
• /
• pp.47-57
• /
• 2018

As a preliminary step for developing vulnerability assessment model of terrorism, this study aims to deduce and classify architectural design elements of multi-use buildings to protect them from terrorism using explosives. For these objectives, eleven domestic and foreign guidelines of anti-terrorism, including RVS which is one of the commonly used tools for assessing vulnerability to terrorism, were analyzed. As results, 2 scenarios of explosive attack, 4 layers of defense, and 58 architectural design elements for risk assessment of terrorism were deduced. And the design elements were categorized into 18 groups based on their purpose and function to take into account the supplementary effects among them. Then, the design measures applicable for each element were classified into several grades on the basis of its protection or risk level. Lastly, 11 multi-use buildings were selected and investigated how the elements suggested in this study were applied to them.

• Smart Structures and Systems
• /
• v.31 no.4
• /
• pp.383-392
• /
• 2023

Post-earthquake building condition assessment is crucial for subsequent rescue and remediation and can be automated by emerging computer vision and deep learning technologies. This study is based on an endeavour for the 2nd International Competition of Structural Health Monitoring (IC-SHM 2021). The task package includes five image segmentation objectives - defects (crack/spall/rebar exposure), structural component, and damage state. The structural component and damage state tasks are identified as the priority that can form actionable decisions. A multi-task Convolutional Neural Network (CNN) is proposed to conduct the two major tasks simultaneously. The rest 3 sub-tasks (spall/crack/rebar exposure) were incorporated as auxiliary tasks. By synchronously learning defect information (spall/crack/rebar exposure), the multi-task CNN model outperforms the counterpart single-task models in recognizing structural components and estimating damage states. Particularly, the pixel-level damage state estimation witnesses a mIoU (mean intersection over union) improvement from 0.5855 to 0.6374. For the defect detection tasks, rebar exposure is omitted due to the extremely biased sample distribution. The segmentations of crack and spall are automated by single-task U-Net but with extra efforts to resample the provided data. The segmentation of small objects (spall and crack) benefits from the resampling method, with a substantial IoU increment of nearly 10%.