• The Transactions of the Korean Institute of Electrical Engineers P
• /
• v.61 no.1
• /
• pp.5-9
• /
• 2012

In this paper, multi folded dual monopole antenna for WLAN communication of dual bend is designed and fabricated. The proposed multi folded dual monopole antenna are consisted of two folded rectangle loops by microstrip fed that is modified dual monopole antenna. Therefore, the outside rectangle loop structure of the proposed antenna is extended a dual monopole. The characteristics of the proposed antenna is analyzed return loss and radiation patterns by the FDTD tools. As a result a bandwidth of proposed antenna has about 0.82GHz from 2.0 to 2.82[GHz] and 0.7GHz from 5.46 to 6.16[GHz]. It is used WLAN communications of 2[GHz] and 5[GHz].

• The Journal of the Korea institute of electronic communication sciences
• /
• v.15 no.2
• /
• pp.219-224
• /
• 2020

In this paper, we studied the compact MIMO(: Multi-Input Multi-Output) antenna for multi-beam pattern generation and control in narrow space. The characteristics and performance of the basic Dipole SPA and Monopole SPA structures are shown. We implemented a monopole SPA antenna and measured its performance in an 802.11g system. When the average transmission rate was measured using the SPA antenna, the SPA antenna improved the best performance by 8.7 times compared to commercial antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.11
• /
• pp.1127-1133
• /
• 2003

In this paper, we proposed a novel folded multi-strip monopole antenna whose height is reduced using folded strip structure. It has a broadband characteristic and its measured impedance bandwidth ratio is approximately 1.85 : 1, from 4.55 GHz to 8.4 GHz, for VSWR$\leq$2. Proposed antenna has vertically polarized omni-directional conical beam radiation pattern. It maintains about the same radiation pattern over entire bandwidth.

• Journal of information and communication convergence engineering
• /
• v.8 no.6
• /
• pp.630-634
• /
• 2010

In this paper, we designed and fabricated a multi-band folded monopole antenna for mobile handsets that can be used for multiple services. The proposed antenna, with a small size of $28.060{\times}12.665{\times}5.035mm^3$ can provide sufficient bandwidth to cover the GSM900 (Global System for Mobile Communications: 880-960 MHz), DCS (Digital Cellular System: 1710-1880 MHz), K-PCS (Korea-Personal Communication Service: 1750-1870 MHz), Wibro (2300-2390 MHz) and Bluetooth (2400-2483 MHz) bands.

• Journal of information and communication convergence engineering
• /
• v.9 no.1
• /
• pp.16-20
• /
• 2011

In this paper, we designed and implemented an internal multi-band folded monopole antenna for mobile handset. The proposed antenna covers Global System for Mobile Communications (GSM900: 880~960 MHz), Digital Communications System (DCS: 1710~1880 MHz), US-Personal Communications Service (US-PCS: 1850~1990 MHz), Bluetooth(2400~2484 MHz), WiMAX(3400~3600 MHz), and Wireless Local Area Network (WLAN: 5150~5350 MHz, 5725~5875 MHz) band for Voltage Standing Wave Ratio $(VSWR)\;{\le}\; 3$. The measured peak gains of the implemented antenna are -1.78dBi at 920MHz, 2.72dBi at 1795MHz, 2.25dBi at 1920MHz, 2.34dBi at 2442MHz, 2.11 dBi at 3550MHz, and 2.04 dBi at 5250MHz.

• Journal of IKEEE
• /
• v.15 no.4
• /
• pp.339-344
• /
• 2011

In this paper, we proposed an internal multi-band monopole antenna for mobile phone that can be used for smart phones. The proposed antenna has a small volume of $38{\times}8.5{\times}5\;mm^3$, ground size is $100{\times}60\;mm^2$, and covers the GSM900 (Global System for Mobile communications : 880-960 MHz), DCS (Digital Communications System : 1710-1880 MHz), K-PCS (Korea-Personal Communications Service : 1750-1870 MHz), US-PCS (US Personal Communications Service : 1850-1990 MHz), Bluetooth (2400-2483 MHz), Wibro (2300-2390 MHz) and WLAN (Wireless Local Area Network : 2400-2483.5 MHz) bands. The measured peak gains of the implemented antenna are 1.15 dBi at 920 MHz, 3.58 dBi at 1795 MHz, 3.46 dBi at 1810 MHz, 2.91 dBi at 1920 MHz, 5.18 dBi at 2345 MHz, 3.37 dBi at 2442 MHz.

• Journal of information and communication convergence engineering
• /
• v.7 no.3
• /
• pp.263-267
• /
• 2009

Cylindrical monopole antenna is one of most promising candidates for multi-band applications such as PCS, WLAN, DMB, and UWB wireless services. In this research, we demonstrate that there exist two types of current distributions according to the exciting frequency in a double band cylindrical monopole antenna, in which double resonance is achieved by adjusting the coupling structure of the antenna base. The operating modes of current distributions are identified from CST software simulations, the standing wave mode in a lower band and the traveling wave mode in a higher band. Also it is noticed that the mode behavior is quite similar to a helical antenna, a standing-wave (resonance) mode and a traveling-wave (non-resonance) mode according to the electrical dimensions of antenna. The effective ranges for operating modes and design formulas of the double band antenna are derived from simulation and measured results.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.6 no.2
• /
• pp.119-125
• /
• 2007

In this paper, a multi-band folded planar monopole internal antenna for mobile handset applications is proposed. The proposed antenna has multi-resonances, which is different from a conventional folded monopole antenna, and it provides a wide bandwidth at high frequency bands. The measured impedance bandwidth (VSWR < 3) is 180 MHz and 1880 MHz in lower and higher frequency bands, respectively. The proposed antenna can effectively cover most wireless communication bands including CDMA, GSM, GPS, DCS, PCS, and W-CDMA, WiBro and S-DMB.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.46 no.12
• /
• pp.52-58
• /
• 2009

We propose a folded monopole antenna with loads, and analyze the roles of design parameters which affect the return loss of the proposed antenna. VSWR < 3 bandwidth of the antenna is 30 ~ 2000 MHz, ranging from the HF/VHF/UHF bands. For operating travelling antenna, we connect six loads at the end of the antenna. The reflected wave is drastically reduced due to the six loads. For improved return loss properties, we use Klopfenstein tape that determine positions and values of six loads. The propose antenna has omni-directional radiational patterns like that of conventional monopole antennas. For wideband impedance transformation, we use the balun which operating frequency region is 10 ~ 1900 MHz. We expect the proposed antenna has important role for the wideband and multi-rold multi-functional communication systems.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.5
• /
• pp.135-141
• /
• 2020

This paper summarizes the data of a monopole antenna with a sleeve structure that can be applied in various ways. Sleeve monopole antennas have broadband characteristics and are used for multi-frequency applications. The sleeve monopole antenna is composed of a vertical conductor, which is a radiator, and a sleeve having the same structure as a coaxial cable. The sleeve acts as a radiator and an open stub. The length of the sleeve should be 1/3~2/3 of the total length of the antenna. A monopole antenna having a sleeve structure is applicable to a vehicle wiper antenna. In addition, the case of applying this antenna to a broadband sleeve antenna using a loading coil, a broadband printed sleeve monopole antenna for an ISM band, a gap sleeve and a double sleeve, and a UWB planar monopole antenna using half cutting was summarized and analyzed in terms of structure and broadband.