• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.1685-1686
• /
• 2008

This paper presents the design and experiment results of a multi-layered microsystem for magnetic bead applications. The magneto-microfluidic device is designed for capable of separating magnetic beads. In the presence of the magnetic field, magnetic beads are attracted and moved to high gradient magnetic fields. A multi-layered microfluidic channel consists of top and bottom layers in order to separate magnetic beads in the vertical direction. Our channel is easily integrated magnetic cell sorter, especially on-chip microelectromagnet or permanent magnet device. Fast separation of magnetic beads in top and bottom channels can be used in high throughput screening to monitor the efficiency of blood and drug compounds.

• Journal of information and communication convergence engineering
• /
• v.4 no.2
• /
• pp.88-91
• /
• 2006

In this paper, a novel physical structure for planar spiral inductors is proposed. The spiral inductors were designed and fabricated on multi-layered substrate Bragg-reflector/silicon (BR/Si) wafer. The impacts of multi-layered structure substrate and pattern on characteristics of inductor were studied. Experimental results show that the inductor embedded on Bragg reflector/silicon substrate can achieve the best improvement. At 0.4-1.6 GHz, the Bragg reflector seems to significantly increase the S11-parameter of the inductor.

• Laser Solutions
• /
• v.12 no.4
• /
• pp.1-5
• /
• 2009

Conventional patterning based on wet-process for multi-layered film is a relatively complex and costly process though it is a necessary step for fabrication of TFT-LCD module. Recently, a direct pattering by laser has been studied because it is low cost and simple process compared to the wet process. In this work, the selective removal process of multi-layered film (polyimide/indium tin oxide/glass) is studied by modeling the thermal and mechanical behavior for multi-layered structure. Especially, the effects of thickness of polyimide layer are examined.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.20 no.3
• /
• pp.61-75
• /
• 1995

In a microcellular personal communication service (PCS) it is required to minimize the paging and location updating signals. We propose a multi-layered location registration scheme to reduce the paging and updating signals. In this scheme the subscribers are grouped by their characteristics (velocity and call arrival rate) and are served by appropriately sized location registration area. In order to group the subscriber, we define subscriber grouping problem (SGP). Proposition are examined to solve the grouping problem. The performance of the proposed subscriber grouping algorithm is tested with examples. Simulation results indicate that the subscriber grouping procedure is effective for designing the multi-layered location registration scheme.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2006.05a
• /
• pp.255-258
• /
• 2006

In this paper, a novel physical structure for planar spiral inductors is proposed. The spiral inductors were designed and fabricated on multi-layered substrate Bragg-reflector/silicon (BR/Si) wafer. The impacts of multi-layered structure substrate and pattern on characteristics of inductor were studied. Experimental results show that the inductor embedded on Bragg reflector/silicon substrate can achieve the best improvement. At 0.4-1.6 GHz, the Bragg reflector seems to significantly increase the $S_{11}-parameter$ of the inductor.

• Proceedings of the Earthquake Engineering Society of Korea Conference
• /
• 2006.03a
• /
• pp.628-636
• /
• 2006

This paper presents 3D infinite elements in Cartesian coordinates for the elastodynamic problem in multi-layered half-space. Five kinds of infinite elements are developed by using approximate expressions of multiple wave components for the wave function in exterior far-field soil region. They are horizontal, horizontal-corner, vertical, vertical-corner and vertical-horizontal-corner elements. The elements can be used for the multi-wave propagating problem. Numerical example analyses are presented for rigid disk, square footings and embedded footing on homogeneous and layered half-space. The numerical results obtained show the effectiveness of the proposed infinite elements.

• Journal of Aerospace System Engineering
• /
• v.15 no.6
• /
• pp.59-65
• /
• 2021

In this paper, the transmission characteristics of the multi-layered composite material with wire mesh and honeycomb core for aircraft applications have been analyzed with the proposed method. The proposed method converts the conductive wire mesh into effective layer, while for the dielectric honeycomb core, effective permittivity has been derived based on volume fraction with the proposed method. The proposed method has been verified through comparison with full-wave simulation and revealed excellent. In addition, the calculation time of the proposed method is a few order of magnitude faster in comparison with the full-wave simulation.

• Geomechanics and Engineering
• /
• v.32 no.6
• /
• pp.553-566
• /
• 2023

A circular tank foundation resting on the ground and subjected to axisymmetric horizontal and vertical loads and moments is analyzed using the variational principles of mechanics. The circular foundation is assumed to behave as a Kirchhoff plate with in-plane and transverse displacements. The soil beneath the foundation is assumed to be a multi-layered continuum in which the horizontal and vertical displacements are expressed as products of separable functions. The differential equations of plate and soil displacements are obtained by minimizing the total potential energy of the plate-soil system and are solved using the finite element and finite difference methods following an iterative algorithm. Comparisons with the results of equivalent two-dimensional finite element analysis and other researchers establish the accuracy of the method.

• Proceedings of the Korean Information Science Society Conference
• /
• 1998.10a
• /
• pp.465-467
• /
• 1998

MPEG-2 는 Layered Coding방식을 채택하여 하나의 base layer와 4개의 enhancement layer로 이루어져 있으나 동영상 재생을 위해 필요한 최소한의 layer인 base layer 만으로도 데이터 양이 많기 때문에 인터넷 환경에 적용하기가 어렵다. 이에 base layer를 다시 세분화된 layer로 나누기 위해 인코딩 중에는 또는 인코딩 결과로 만들어지는 MPEG-2 Video steam 의 하부 구조인 블록층에 존재하는 8$\times$8블록의 AC 계수들을 layering한다. Layered된 base layer의 데이터는 통신망 및 단말기의 QoS에 따라 서로 다른 전송 채널을 통해 서버에서 클라이언트 디코더로 전송된 후 디코더에 실시간적으로 병합한 후 재생된다. 본 논문에서 제안하는 기법을 이용하여 기존에 encoding MPEG-2 Video steam의 AC계수를 layering할 경우에 QoS에 따라 가변적으로 데이터 양을 서버 쪽에서 조절할 수 있었고, 통신 선로 상에서 이동하는 데이터 양의 원래의 MPEG-2 Video steam 을 이용했을 때보다 인코딩 중에 블록을 변환하면 51% 정도 감소하고 인코딩 되어진 데이터를 이용했을 경우에는25%정도 감소하는 것을 알 수 있었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.204.1-204.1
• /
• 2015

We studied the electrical properties and gate bias stress (GBS) stability of thin film transistors (TFTs) with multi-stacked InZnO layers. The InZnO TFTs were fabricated via solution process and the In:Zn molar ratio was 1:1. As the number of InZnO layers was increased, the mobility and the subthreshold swing (S.S) were improved, and the threshold voltage of TFT was reduced. The TFT with three-layered InZnO showed high mobility of $21.2cm^2/Vs$ and S.S of 0.54 V/decade compared the single-layered InZnO TFT with $4.6cm^2/Vs$ and 0.71 V/decade. The three-layered InZnO TFTs were relatively unstable under negative bias stress (NBS), but showed good stability under positive bias stress (PBS).