• Journal of Magnetics
• /
• 제7권3호
• /
• pp.98-100
• /
• 2002

Tunnel magnetoresistive devices using an individual multi-walled carbon nanotube were fabricated and their low-temperature electrical transport propertiers were investigated. With the ferromagnetic Co electrodes, the multi-walled carbon nanotube exhibited hysteretic magnetoresistance curve at low temperatures. Depending on the temperature and the bias current, the magnetoresistance ratio can be as high as 16% at the temperature of 2.2 K. Such high magnetoresistance ratio indicates a long diffusion length of the multi-walled carbon nanotube.

• Bulletin of the Korean Chemical Society
• /
• 제35권6호
• /
• pp.1665-1669
• /
• 2014

Four multialkoxy-functionalized siloxane base-polymers (BP-1~4) were synthesized through either hydrosilylation or condensation reactions in order to prepare multi-networked siloxane polymers having appropriate physical properties for protective coating in fabrications of electronics. Formulations of 4 base-polymers gave coating materials A and B. Product A showed well-controlled flowing and leveling properties, and product A-2 was successfully applied to protective insulating coating for junction areas of connectors and chips in PDP controller. Tack free time, extrusion rate, dielectric breakdown voltage, hardness, thermal stability, water resistance and flame resistance of products A and B were examined.

• 센서학회지
• /
• 제5권4호
• /
• pp.17-24
• /
• 1996

교류-직류 변환방법으로 교류전압 및 전류를 정밀측정하기 위한 평면형 다중접합 열전변환기를 제작하였다. 실리콘 기판에 지지된 $Si_{3}N_{4}$ (200 nm) / $SiO_{2}$ (400 nm) / $Si_{3}N_{4}$ (200 nm) 샌드위치구조의 두께 $0.8\;{\mu}m$ (크기 $2{\times}4\;mm^{2}$)의 멤브레인 위에 가열선과 열전대 접합을 형성하였다. 멤브레인의 세로방향 중앙에 NiCr 가열선을 배치하고, 가열선 주위 또는 그 위에 동-콘스탄탄(Cu- CuNi44)으로 $48{\sim}156$ 개의 열전대의 열(熱)접합을 형성하였으며, 열전대의 냉(冷)접합은 실리콘 기판 위에 형성하였다. 직류 10 mA의 입력에 대한 열전대의 출력전압은 종류에 따라 $76\;mV{\sim}382\;mV$를 얻었으며, 입력 5 mA일때 출력전압의 단기안정도는 ${\pm}5{\sim}15\;ppm4/ 10 min이었다. 공기분위기에서 감응도는 $3.9{\sim}14.5V/W$로 측정되었고, 열전대의 수가 48개인 모델 BF48의 경우 공기중에서의 감응도가 3.9 V/W로써, 56개의 열전대를 갖는 3차원구조 다중접합 열전변환기의 진공분위기에서의 감응도보다 2배 이상 크게 나타났다. 또한 측정전류 10 mA 이하, 측정주파수 $5\;Hz{\sim}2\;kHz$에서의 교류-직류 변환차이는 약 ${\pm}1\;ppm$ 이하이었고, 5 kHz 및 10 kHz에서는 약 $2{\sim}3\;ppm$ 이었다.

• 한국수의병리학회:학술대회논문집
• /
• 한국수의병리학회 2004년도 추계 학술대회 초록집
• /
• pp.12-12
• /
• 2004

• 대한의용생체공학회:의공학회지
• /
• 제13권3호
• /
• pp.201-208
• /
• 1992

In the indirect optical bio-telemetry, high frequency response and low minimum detectable optical power can be achieved by using photodiode with small light receiving area which minimizes junction capacitance. But, on the other hand, S/N ratio becomes low because the optical signal current is small. To solve such a problem, we attach plato-convex lens in front of photo diode, The results of comput- er simulation and experiments suggest promotion of light receiving efficiency and possibility of multi- telemetry system through directivity of convex lens in one room.

• 생명과학회지
• /
• 제25권1호
• /
• pp.101-112
• /
• 2015

자가밀착연접 단백질들은 세포, 특히 수초화된 신경교세포막의 층상구조 사이에 존재하는 밀착연접에 존재한다. 그들 중 일부는 다른 단백질의 C-말단의 PDZ 결합 모티프에 붙는 postsynaptic density-95/Disks large/Zonula occludens-1 (PDZ) 도메인을 가진다. PDZ domain은 박테리아, 식물, 세균, 후생동물, Drosophila에 존재하여 거대한 단백복합체를 형성할 수 있게 해준다. 이러한 단백복합체들은 세포 내 신호전달, 단백질 표적화, 그리고 세포막 극화 작용을 한다. ZO-1, ZO-2, AF-6, PATJ, MUPP1, PAR-3는 자가밀착연접에 존재한다고 확인되었다. PAR-3는 atypical protein kinase C와 PAR-6와 반응하여 세포의 극성 형성에 중요한 역할을 하는 3차원 단백질복합체를 형성하는데 이는 Caenorhabditis elegans와 Drosophila 종에서 척추동물에까지 보존되었다. MAGI2는 흥분성 시냅스에서 ${\alpha}$-amino-3-hydroxyl-5-methyl-4-isoxazole propionate (AMPA) 수용체와 반응한다. PATJ는 claudin-1과 함께 마디곁 루프에서 발견되는 반면, MUPP1은 claudin-5와 함께 축삭사이막과 Schmidt-Lanterman 절흔에서 찾을 수 있다. ZO-1, ZO-2 그리고 PAR-3의 경우에는 세 장소 모두에서 발견된다. PDZ 도메인을 보유한 단백질들의 서로 다른 분포는 자가밀착연접의 발생에 영향을 준다. 이 총설에서는 수초화된 슈반 세포의 자가밀착연접에 존재하는 PDZ 도메인을 가진 단백질들과 그들의 기능을 알아볼 것이다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2007년도 춘계학술대회B
• /
• pp.2444-2448
• /
• 2007

The multi channel of DDI which is the core part of the LCD-TV has been propelled. When multi channel in DDI is introduced, it brings a thermal problem because of the increased power. To solve the thermal problem of the DDI it needs to be investigated each at the package level and module level. It is important to extract the junction temperature(Tj) of DDI clearly from the system level. The objective of this research is to construct a compact model. The compact model is to reduce LCD module including DDI. When the compact model is used, it will be able to easily handle the boundary condition and accurately predict the temperature. Consequently, the temperature of DDI can be calculated easily at the system level. Through this research,we also proposed the cooling plan of DDI for a protection of overheating. The cooling plan was utilized in DDI design.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.251-252
• /
• 2022

The microfluidic controlled droplet manufacturing system is one of the most powerful methods for capsule manufacturing. The microfluidic control method can control the type and size of the capsule by changing the size and configuration of the channel. In addition, by increasing the number of channels, capsules of uniform size can be mass-produced. In this paper, a capsule manufacturing system including flow-focusing and T junction method was designed. In addition, the effectiveness of this system was verified by manufacturing multi-emulsion capsules with a size of 2.2 to 3 mm.

• 전기학회논문지P
• /
• 제61권2호
• /
• pp.97-102
• /
• 2012

CPV system in the desert areas or areas near the equator, as is suitable for high-temperature region. As compared to silicon solar cells, CPV system have a high proportion of a BOS (balance of system). Solar cells because of its low proportion when designing a module technology is applied in a variety of ways. Applied to the CPV system is classified into two kinds of optical technology. One of those using fresnel lens uses refraction of light energy. The other is a mirror reflection of the structure using sprays. Both of these two ways to condense the sun to collect solar cell is a form of light. And goals by using a small solar cell materials is to produce more energy. In this paper, suitable for a domestic environment, with the aim CPV Manufacturing Technology, built on a variety of modular process technology to the development of a prototype performance analysis was carried out. In particular, silicone coated on the glass by the method of implementation of the Fresnel lens SOG(Silicon on glass) by applying the lens to absorb the solar spectrum was broad. In addition to, for the analyze to characteristics of the CPV module, developed CPV module performance and generating characteristics studied. These related technology through research and development of high-performance multi-junction solar cells, modules, development of concentrating solar power systems to facilitate the growth of the market is considered to be.

• 신재생에너지
• /
• 제4권2호
• /
• pp.68-73
• /
• 2008

It is very important that constitution of good hetero-junction interface with a high quality amorphous silicon thin films on very cleaned c-Si wafer for making high efficiency hetero-junction solar cells. For achieving the high efficiency solar cells, the inspection and management of c-Si wafer surface conditions are essential subjects. In this experiment, we analyzed the c-Si wafer surface very sensitively using Spectroscopic Ellipsometer for < ${\varepsilon}2$ > and u-PCD for effective carrier life time, so we accomplished < ${\varepsilon}2$ > value 43.02 at 4.25eV by optimizing the cleaning process which is representative of c-Si wafer surface conditions very well. We carried out that the deposition of high quality hydrogenated silicon amorphous thin films by RF-PECVD systems having high density and low crystallinity which are results of effective medium approximation modeling and fitting using spectroscopic ellipsometer. We reached the cell efficiency 12.67% and 14.30% on flat and textured CZ c-Si wafer each under AM1.5G irradiation, adopting the optimized cleaning and deposition conditions that we made. As a result, we confirmed that spectroscopic ellipsometry is very useful analyzing methode for hetero-junction solar cells which need to very thin and high quality multi layer structure.