• Membrane Journal
• /
• v.23 no.1
• /
• pp.1-11
• /
• 2013

Poly(ether imide) (PEI)-poly(dimethylsioxane) (PDMS) composite membranes and their modules were prepared, which are capable of selective $CO_2$ separation from the mixture gas. The gas flow rate, concentration, recovery ratio of $H_2$ and removal ratio of $CO_2$ outflowing by stage-cut were characterized at $25^{\circ}C$ and the constant pressure. In addition, to increase the recovery ratio of $H_2$, one stage, two stage series connection, and three stages series + parallel connection tests were carried out. When the stage-cut was 0.32 for the three stages connection operation, the concentration $H_2$ of the produced gas and the recovery ratio of $H_2$ was 97% and 85%, respectively. And also the removal ratio of $CO_2$ was 90% was obtained and the recycled gas concentration was similar with that of the feed gases.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.622-627
• /
• 2007

최근 하천의 모습은 이수 및 치수를 위해 설치된 수공구조물과 각종 오염원으로 인한 수질악화, 산업화 및 도시화에 따른 물순환시스템의 변화로 하천의 물순환 시스템이 바뀌게 되고 하천을 찾는 시민들의 환경의식 미성숙으로 인한 직간접적인 하천오염 활동이 이루어지고 있다. 하천에 대한 이러한 변화는 수질, 수량 및 하천의 구조적 측면에서 하천 생태계에 많은 영향을 끼치고 있다. 따라서 하천의 정상적인 기능을 회복시켜 하천 생태계 보전과 환경적으로 안정된 하천 조성이 이루어지도록 하기 위해서는 하천을 보다 자연스럽고 지속적으로 관리하기 위한 효율적인 환경유량의 관리가 필요하다. 하천의 전체적인 생태시스템을 고려한 환경유량의 관리를 위해서는 기존 환경유량의 개념, 산정방법 등 현황을 분석하고 하천 생태계에 영향을 미치는 인자들에 대한 관리방안을 마련하는 것이 중요하다. 본 연구의 목표는 하천생태계에 대한 영향인자의 장단점을 분석하고 이들이 어느 정도의 영향을 미치고 있는지를 정량적으로 파악함으로써 사회적으로 요구되는 환경유량을 산정할 때 어류 및 식생 등 하천의 생태계와 하천의 수량 및 수질, 하천의 수리구조물 등 하천의 구조적인 변화를 고려할 수 있는 방안을 마련하는 것이다. 이를 위하여 우선적으로 국외 선진국에서 활용되고 있는 다학제간 전문가 그룹(Multi-disciplinary Expert Team, MET)을 통해 하천 생태시스템을 분석하고 환경유량 산정 모형을 활용하여 저수지 댐과 연계 운영함으로써 어류 및 식생 등 생태서식처와 사회환경 개선에 필요한 유량을 유지할 수 있는 방안을 적용하고자 한다. 본 연구에서는 대상유역인 금강유역에 대해 환경유량을 산정하기 위한 개념모형을 구축하였다. 개념모형은 대청댐 건설 이전, 대청댐 건설이후${\sim}$용담댐 건설 이전, 대청댐과 용담댐 건설 이후 등 3개의 시나리오를 통해 하도 및 수변공간과 유량변화에 따른 유황분석 등을 통해 손실된 생태시스템을 정량화하여 궁극적으로는 복원을 위한 대응방안을 마련하도록 할 수 있도록 구축되었다. 또한 댐으로 인한 하류지역의 영향범위 및 하천생태계에 미친 영향을 감소하기 위하여 적절한 환경유량을 산정하기 위한 것이다. 구축된 개념모형을 바탕으로, 금강유역에 대한 기초적인 수문, 하천특성, 현장조사 등을 실시하였다. 향후에는 본 연구결과를 기초로 하여 환경유량을 산정하기 위한 모형을 개발하고 산정된 환경유량을 확보 및 관리하기 위한 방안과 친환경적인 댐 운영방안을 마련하게 될 것이다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.240-240
• /
• 2011

The first neutral beam injector (NBI-1) has been developed for the Korea Superconducting Tokamak Advanced Research (KSTAR) tokamak. A first long pulse ion source (LPIS-1) has been installed on the NBI-1 for an auxiliary heating and current drive of KSTAR core plasmas. Performance of ion and neutral beam extractions in the LPIS-1 was investigated initially on the KSTAR NBI-1 system, prior to the neutral beam injection into the main plasmas. The ion source consists of a JAEA magnetic bucket plasma generator with multi-pole cusp fields and a set of KAERI prototype-III tetrode accelerators with circular apertures. The inner volume of plasma generator and accelerator column in the LPIS-1 is approximately 123 liters. Final design requirements for the ion source were a 120 kV/ 65 A deuterium beam and a 300 s pulse length. The extraction of ion beams was initiated by the formation of arc plasmas in the LPIS-1, called as an arc-beam extraction method. A stable ion beam extraction of LPIS-1 has been achieved up to an 100 kV/42 A for a 4 s pulse length and an 80 kV/25 A for a 14 s pulse length. Optimum beam perveance of 1.21 microperv has been found at an accelerating voltage of 80 kV. Neutralization efficiency has been measured by using a water flow calorimetry (WFC) method of calorimeter and an operation of bending magnet. The full-energy species of ion beams have been detected by using the diagnostic method of optical multichannel analyzer (OMA). An arc efficiency of the LPIS was 0.6~1.1 A/kW depending on the operating conditions of arc discharge.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.24 no.1
• /
• pp.44-52
• /
• 1982

Recently, estuary reserovoirs have been actively constructed in Korea and also in Japan there are a large number of estuary reservoirs constructed. But most of the estuary reservoirs are located at the downstream of a river where geographical condition is best for the construction of an enclosing dam. And an effective utilization of water from the estuary reservoir seems to be difficult even if estuary reservoirs are considered to be the water resources the most available for their watershed. Studies on estuary reservoirs so far have been mainly concentrated on the physical and engineering problems of the dam construction itself. The purpose of the present study is to review the estuary reservoir planning in connection with the water resources development and to study a basis of the planning. First, the levels of water use in Korea and Japan were compared with those of other countries in the world. And then, some representative reservoirs were selected to study the roles of a reservoir and water-using conditions in the watershed. Based on the study, a survey was given on the relation between a dam construction upstream and an estuary reservoir construction downstream of a river. Finally, a comprehensive examination was made of the bases of estuary reservoir planning. (1) The estuary reservoir planning is deeply related to the plan for water use develo- pment in the watershed. After the upstream water resources were fully developed up to the most, water reso- urces development by an estuary reservoir should be started. (2) If an estuary lake has a capacity big enough, it can store flood discharge of the watershed without any loss and become a basic facility that will bring about the maxi- mum use of water from the watershed. (3) Estuary reservoirs store water used in the upstream watershed, so recycling of water use is attained by the reservoir. Water in the estuary lake is difficult to be fresh water in its long run. Therefore, estuary reservoir should be located at a place where polluted water is purified and refused. All the planning should be based on the assumption that water in the estuary lake is not fresh but polluted after a long time. (4) The estuary lake can only supply water to the lower basin directly. But the upstream area is benefited from the estuary lake by exchange of irrigation water sources between the lower and the upper area. So a large-scale exchange plan between new and existing water resources is important. By constructing estuary reservoirs and the exchange of water sources between upper and lower areas, the reasonable maximum use of water from the whole watershed is at- tained. (5) The big problem coming from the water resources development by an enclosing estuary is salt water intrusion into the lake. To maintain the estuary lake salt-free, multi-purpose use of the lake should be avoided. It is necessary to take such fundamental measures as abolition of back flow operation of gate, and the closing of the fish port and the fish ladder. The results mentioned above were found in this study and these results of this study could be used for the adequate planning of estuary reservoirs in connection with the maximum water use of the watershed.

• Analytical Science and Technology
• /
• v.15 no.3
• /
• pp.236-242
• /
• 2002

A method was investigated to determine the thickness of coating on steel sheet using rf glow discharge atomic emission spectrometer. The RF gas-jet boosted glow discharge has such salient feature as good pleasure stability and high sputtering efficiency that it was possible to determine the thickness of silicon resin film on zinc electroplated steel. The erosion speed variation is dependent on discharge power, gas flow rate and discharge pressure. therefore determine discharge condition to measure the thickness of coating on steels. The fundamental studies have been carried out to investigate an optimum condition for in-depth analysis and composition of zinc coating on steel. In this study, the calibration curve for thickness determination of silicon resin film was found to be linear in the range of $1000{\sim}3500mg/m^2$ film thickness. The developed rf gas-jet boosted glow discharge was applied to the analysis of zinc coating and silicon resin film on steel made by RIST.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.9 no.4
• /
• pp.247-259
• /
• 2007

In this study, we examined the flux of carbon and water using an eco-hydrological model, Regional Hydro-Ecologic Simulation System (RHESSys). Our purposes were to develop a set of parameters optimized for a well-designed experimental watershed (Gwangneung Research Watershed, GN) and then, to test suitability of the parameters for predicting carbon and water fluxes of other watershed with different regimes of climate, topography, and vegetation structure (i.e Gangseonry Watershed in Mt. Jumbong, GS). Field datasets of stream flow, soil water content (SWC), and wood biomass product (WBP) were utilized for model parameterization and validation. After laborious parameterization processes, RHESSys was validated with the field observations from the GN watershed. The parameter set identified at the GN watershed was then applied to the GS watershed in Mt. Jumbong, which resulted in good agreement for SWC but poor predictability for WBP. Our study showed that RHESSys simulated reliable SWC at the GS by adjusting site-specific porosity only. In contrast, vegetation productivity would require more rigorous site-specific parameterization and hence, further study is necessary to identify primary field ecophysiological variables for enhancing model parameterization and application to multiple watersheds.

• Korean Chemical Engineering Research
• /
• v.52 no.1
• /
• pp.81-87
• /
• 2014

Flow characteristics and the operating range of gas velocity was investigated for a two-stage bubbling fluidized-bed (0.1 m-i.d., 1.2 m-high) that had continuous solids feed and discharge. Solids were fed in to the upper fluidized-bed and overflowed into the bed section of the lower fluidized-bed through a standpipe (0.025 m-i.d.). The standpipe was simply a dense solids bed with no mechanical or non-mechanical valves. The solids overflowed the lower bed for discharge. The fluidizing gas was fed to the lower fluidized-bed and the exit gas was also used to fluidize the upper bed. Air was used as fluidizing gas and mixture of coarse (< $1000{\mu}m$ in diameter and $3090kg/m^3$ in apparent density) and fine (< $100{\mu}m$ in diameter and $4400kg/m^3$ in apparent density) particles were used as bed materials. The proportion of fine particles was employed as the experimental variable. The gas velocity of the lower fluidized-bed was defined as collapse velocity in the condition that the standpipe was emptied by upflow gas bypassing from the lower fluidized-bed. It could be used as the maximum operating velocity of the present process. The collapse velocity decreased after an initial increase as the proportion of fine particles increased. The maximum took place at the proportion of fine particles 30%. The trend of the collapse velocity was similar with that of standpipe pressure drop. The collapse velocity was expressed as a function of bulk density of particles and voidage of static bed. It increased with an increase of bulk density, however, decreased with an increase of voidage of static bed.

• Korean Journal of Environment and Ecology
• /
• v.31 no.5
• /
• pp.461-471
• /
• 2017

Population genetic studies of 10 groups of Iksookimia pacifica were conducted to investigate the genetic diversity and population genetic structure across its known range in South Korea. Population DNA sequences of one mitochondrial gene (mtCOI) and three nuclear genes (IRBP, EGR2B, RAG1) were examined in samples collected from ten streams that flow into the East Sea. Both mitochondrial and nuclear sequences exhibited significant differentiation among populations except a few cases. The Bayesian analysis of the multi-locus genotypes inferred from the DNA sequences of nuclear genes clustered the individual fish largely into two geographical groups: a northern group (from Baebong stream to Cheonjin stream) and a southern group (Yangyangnamdae stream to Gangneungnamdae stream). Given that the streams flowing into the East Sea are geographically isolated water systems, such separation of genotypes can be interpreted by the geographical separation of common ancestors into north and south that had colonized South Korea. Since the initial geographical separation of the ancestral population by north and south, the ancestral groups seem to have experienced further differentiation into the current genetic clusters through the physical isolation of streams by the East Sea in each region. It is notable that many individuals in the Jasan stream formed a genetic cluster with those of Yangyangnamdae and Gangneungnamdae streams which are distant from each other. In addition, mitochondrial gene showed low genetic differentiation between some neighboring populations and very low level of genetic diversity in several populations. The present population genetic study will provide valuable information for the conservation and management of the Korean endemic fish species, I. paicifica.

• Journal of the Korean Society for Advanced Composite Structures
• /
• v.2 no.3
• /
• pp.1-11
• /
• 2011

The typical truss-lattice material successively packed by repeated cubic symmetric unit cells consists of sub-elements (SE) proposed in this study. The representative continuum model for this truss-lattice material such as the effective strain and stress relationship can be formulated by the homogenization procedure based on the notation of averaged mechanical properties. The volume fractions of micro-scale struts have a significant influence on the effective strength as well as the relative density in the lattice plate with replicable unit cell structures. Most of the strength contribution in the lattice material is induced by axial stiffness under uniform stretching or compression responses. Therefore, continuum based constitutive models composed of homogenized member stiffness include these mechanical characteristics with respect to strength, internal stress state, material density based on the volume fraction and even failure modes. It can be also recognized that the stress state of micro-scale struts is directly associated with the continuum constitutive model. The plastic flow at the micro-scale stress can extend the envelope of the analytical stress function on the surface of macro-scale stress derived from homogenized constitutive equations. The main focus of this study is to investigate the basic topology of unit cell structures with the cubic symmetric system and to formulate the plastic models to predict pressure dependent macro-scale stress surface functions.

• Journal of Korean Society for Atmospheric Environment
• /
• v.21 no.4
• /
• pp.439-458
• /
• 2005

An automated analysis system for water soluble constituents in $PM_{2.5}$ has been developed. The system consists of a high capacity multi tube diffusion scrubber (MTDS), a low temperature particle impactor (LTPI), and two ion (anion and cation) chromatography (IC) systems. Atmospheric particles have been collected by passing sample air through a thermostated MTDS followed by a LTPI. This system allows simultaneous measurements of soluble ions in $PM_{2.5}$ at 30 minutes interval. At the air sampling flow rate of 1.0L/min, the detection limits of the overall system are in the order of tens of $ng/m^3$. This system has been successfully used for the measurement of particulate components of Seoul air from April 2003 to January 2004. $SO_4^{2-},\;NO_3^-,\;NH_4^+,\;NO_2^-,\;Cl^-,\;Na^+,\;K^+,\;Ca^{2+},\;and\;Mg^{2+}$ are the major ionic species for $PM_{2.5}$ at Seoul. Among them, $SO_4^{2-},\;NO_3^-\;and\;NH_4^+$ are the most abundant ions, contributed up to $86\%$ of the total and the concentrations were higher than those in any other urban sites in the world except for Chinese cities. There are high pollutant episodes which contribute about $15\~20\%$ of annual average values of the major ions. During the episode, the all parcels were transported from the asian continent and $PM_{2.5}$ were significantly neutralized. This suggests that aged and long range transported pollutants caused the high pollutant episodes. They showed a distinct daily and seasonal variations:they showed a peak in the early morning caused by the night-time accumulation of particulate matters. Atmospheric reactions including gas-to-particle reactions and inter-particle reactions and meteorological parameters including relative humidity and ambient temperature were described with related to the $PM_{2.5}$ 5 concentrations. All of the ionic species showed higher concentrations during the spring than those for summer and winter.