• 제목/요약/키워드: Multi-DOF

검색결과 158건 처리시간 0.028초

다지 로봇 시스템의 설계 및 개발에 관한 연구 (A Research on the Design and Development of a Robot System with Multi-fingered Hands)

  • 이호연;이종수
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 2002년도 합동 추계학술대회 논문집 정보 및 제어부문
    • /
    • pp.138-141
    • /
    • 2002
  • In this paper, we developed a Master Hand which has 20 potentiometer for getting grasping data of human hands, a Slave Hand which has 20 DOF and five fingers with servo-motors, and a controller for the 7 DOF Arm with Multi-fingered hands. And, we programmed a 3D simulation S/W which controls a Robot System with Multi-fingered hands. A developed Robot System showed good performance in the grasping of an object with known position and shape.

  • PDF

Minimal Order LQG/LTR 기법에 의한 모형헬리콥터의 정지비행 자세제어 (Hovering Flight Control for a Model Helicopter using the Minimal-Order LQG/LTR Technique)

  • 양준선;한권희;이자성
    • 대한전기학회:학술대회논문집
    • /
    • 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
    • /
    • pp.457-459
    • /
    • 1998
  • This paper presents a 3-DOF hovering flight controller for a model helicopter using the minimal order LQG/LTR technique. A model helicopter is an unstable multi-input multi-output nonlinear system strongly exposed to disturbances, so a robust multi-variable control theory should be applied to control it. The minimal order LQG/LTR technique which uses a reduced-order observer in the LTR procedure is used to design the controller. Performances for the 3-DOF hovering flight controller are evaluated through computer simulations.

  • PDF

대규모 자유도 문제의 구조해석을 위한 병렬 알고리즘 (A Parallel Algorithm for Large DOF Structural Analysis Problems)

  • 김민석;이지호
    • 한국전산구조공학회논문집
    • /
    • 제23권5호
    • /
    • pp.475-482
    • /
    • 2010
  • 본 논문에서는 대규모 자유도 시스템의 병렬처리를 위하여 2단계로 이루어진 영역분할법(Domain Decomposition Method) 기반의 병렬 알고리즘을 제안하였다. 분할된 영역의 내부 및 외부 경계를 상위영역문제로 정의하고 국부영역문제는 변위 경계조건이 모두 주어지는 분할영역에서의 Dirichlet 문제로 구성한다. 상위영역에서는 전체 상위영역에 대한 강성 행렬의 어셈블이 필요없는 반복법을 통하여 변위를 구하고, 이를 바탕으로 국부영역에서 Multi-Frontal Sparse Solver (MFSS)를 이용하여 변위를 계산한다. 상위영역문제의 연산에서 프로세서 간의 데이터 교환을 최소화하여 계산효율을 유지하며, 동시에 해석 가능한 자유도를 증대시키는 병렬 PCG(Preconditioned Conjugate Gradient)법 기반의 알고리즘을 개발하였다. 제안된 알고리즘을 적용하여 수치해석을 수행한 결과, 프로세서 수가 증가할수록 계산성능의 손실없이 해석 가능한 자유도가 비례하여 증가하는 선형 확장성을 관찰할 수 있었으며, 대규모 자유도 문제에 효과적으로 사용 가능함을 확인하였다.

K-사용자 X 네트워크에서 다중안테나를 이용한 완전 간섭정렬기법 (Perfect Interference Alignment for K-user MIMO X Network)

  • 박성호;박기홍;김명진;고영채
    • 한국전기전자재료학회논문지
    • /
    • 제24권2호
    • /
    • pp.95-101
    • /
    • 2011
  • In wireless X networks where all transmitters send the independent messages to all receivers, the theoretical bound on the degrees of freedom (DOF) and interference alignment (IA) scheme for its achievability are given by Cadambe and Jafar [1]. However, IA scheme for wireless X network may be infeasible in practice unless the transmitters have the perfect channel information. In addition, if the transmitter with single antenna uses time-varying channel coefficients as a beamforming vector, the infinite channel extension is required to achieve the theoretical bound on the DOF of wireless X networks with perfect IA scheme. In this paper, we consider K-user MIMO X network where K transmitters and K receivers have M antennas each. While the beamforming vectors have been constructed with multiple channel uses over multiple time slot in the earlier work, we consider the beamforming vectors constructed only by a spatial signature over unit time. Accordingly the channel information at the transmitters can be available instantaneously. Then we propose the perfect IA scheme with no channel extension. Based on our sum-rate analysis and the simulation results, we confirm that our proposed scheme can achieve MK/2 DOF which is quite close to the theoretical bound on the DOF region of wireless X networks.

날개 전개가 가능한 무장의 분리 특성해석 (Separation Analysis of a Store with Deployable Wings)

  • 김병규;김상진;강인모;김명성;이승수
    • 한국항공우주학회지
    • /
    • 제35권5호
    • /
    • pp.381-389
    • /
    • 2007
  • 외부장착물의 효율적인 분리해석을 위해 6-DOF 시뮬레이션 프로그램을 개발하였다. 이 S/W는 장착물에 작용하는 공기력을 미리 작성된 공력 데이터베이스를 이용하여 간단한 보간으로 얻기에 전산유체역학에 기초한 방법에 비해 매우 빠른 계산시간을 가지며, 고정된 형상의 무장 뿐 아니라 분리 중 날개를 전개하는 무장에 대해서도 해석이 가능하다. 본 논문에서는 날개전개 무장의 공력 데이터베이스를 MSAP(Multi-body Separation Analysis Program)을 이용하여 작성하고, 비정상 감쇠계수를 Missile Datcom을 이용하여 예측하였다. 이 데이터베이스와 6-DOF 시뮬레이션 프로그램으로 무장의 고정된 날개 뿐 아니라, 날개전개에 따른 무장의 분리 안전성을 판단하였다

4자유도 모션 플랫폼을 이용한 잠수함의 운동감 재현과 스테레오 다채널 가시화 (Submarine Behavior Simulation based on 4-DOF Motion Platform and Stereoscopic Multi-Channel Visualization)

  • 허정순;한순흥
    • 한국CDE학회논문집
    • /
    • 제17권5호
    • /
    • pp.333-341
    • /
    • 2012
  • Modeling and simulation is important for military training. People can feel perspective when stereoscope images are created using multi-channel visualizations. A submarine oscillates when the submarine is just below the surface of the sea, so that the reconnaissance becomes difficult. Also, the operator should read the information of the target within 6 seconds using the periscope. The operator must have experience. To solve these problems, stereoscopic multi-channel visualization has been tested. The iCAVE system of KAIST provides a large-scale screen, 7 PCs, and 14 projectors to create the stereoscope images. To simulate the motion of a submarine just below the ocean surface, a 4-DOF motion platform is used. The motion data is transmitted to the visual system and the motion platform through the UDP protocol. Variety of weather conditions are created using the Vega Prime software. The stereoscopic multi-channel visualization and the motion platform system created a realistic simulation system.

2 자유도 자동손목관절을 가진 근전 전동의수 개발 (Development of the Myoelectric Hand with a 2 DOF Auto Wrist Module)

  • 박세훈;홍범기;김종권;홍응표;문무성
    • 제어로봇시스템학회논문지
    • /
    • 제17권8호
    • /
    • pp.824-832
    • /
    • 2011
  • An essential consideration to differentiate prosthetic hand from robot hand is its convenience and usefulness rather than high resolution or multi-function of the robot hand. Therefore, this study proposes a myoelectric hand with a 2 DOF auto wrist module which has 6 essential functions of the human hand such as open, grasp, pronation, supination, extension, flexion, which improves the convenience of the daily life. It consists of the 3 main parts, the myoelectric sensor for input signal without additional attachment to operate the prosthetic hand, hand mechanism with high-torqued auto-transmission mechanism and self-locking module which guarantee the safety under the abrupt emergency and minimum power consumption, and dual threshold based controller to make easy for adopting the multi-DOF myoelectric hand. We prove the validity of the proposed system with experimental results.

Experimental Framework for Controller Design of a Rotorcraft Unmanned Aerial Vehicle Using Multi-Camera System

  • Oh, Hyon-Dong;Won, Dae-Yeon;Huh, Sung-Sik;Shim, David Hyun-Chul;Tahk, Min-Jea
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제11권2호
    • /
    • pp.69-79
    • /
    • 2010
  • This paper describes the experimental framework for the control system design and validation of a rotorcraft unmanned aerial vehicle (UAV). Our approach follows the general procedure of nonlinear modeling, linear controller design, nonlinear simulation and flight test but uses an indoor-installed multi-camera system, which can provide full 6-degree of freedom (DOF) navigation information with high accuracy, to overcome the limitation of an outdoor flight experiment. In addition, a 3-DOF flying mill is used for the performance validation of the attitude control, which considers the characteristics of the multi-rotor type rotorcraft UAV. Our framework is applied to the design and mathematical modeling of the control system for a quad-rotor UAV, which was selected as the test-bed vehicle, and the controller design using the classical proportional-integral-derivative control method is explained. The experimental results showed that the proposed approach can be viewed as a successful tool in developing the controller of new rotorcraft UAVs with reduced cost and time.

과도한 기진력을 받는 다자유도계 구조물의 진동 제어를 위한 적응형 뱅뱅 제어 알고리듬의 유용성에 관한 연구 (A Study on the Applicability of Adaptive Bang-Bang Control Algorithm for the Vibration Control of Multi-DOF Structure under Unexpected Large Earthquakes)

  • 임채욱;정태영;문석준
    • 한국지진공학회논문집
    • /
    • 제5권1호
    • /
    • pp.53-61
    • /
    • 2001
  • 구조물이 과동한 기진력을 받을 때에 구조물의 진동 제어를 위하여 적응형 뱅뱅 제어 알고리듬이 저자들에 의해서 제안된 바 있으며, 이 제어 알고리듬을 1자유도계의 시험 구조물에 적용하여 제어 성능을 실험적으로 확인하였다. 본 논문은 이의 연장으로서 제안된 적응형 뱅뱅 제어 알고리듬을 최상층에 유압식 농동질량 감쇠기가 설치된 다자유도계의 시험 구조물에 적용하여 이의 유용성을 확인하였다. 이를 통하여 제안된 적응형 뱅뱅 제어 알고리듬은 제어 및 전체 구조계의 안전성이 보장되는 가운데 과도항 외부의 기진력을 받는 다자유도계의 구조물의 진동을 제어함에 효과적임을 확인할 수 있었다.

  • PDF

Modeling the cumulative residual deformation of high-speed railway bridge pier subjected to multiple earthquakes

  • Gou, Hongye;Leng, Dan;Yang, Longcheng;Jia, Hongyu
    • Earthquakes and Structures
    • /
    • 제17권3호
    • /
    • pp.317-327
    • /
    • 2019
  • High-speed railway bridge piers in seismically active area may be subjected to multiple earthquakes and then produce cumulative residual deformation. To study the cumulative residual deformation of high-speed railway bridge piers under multiple earthquakes, a nonlinear numerical analytical model with multi-DOF (MDOF) system is presented and validated against two shaking table tests in this paper. Based on the presented model, a simple supported beam bridge pier model of high-speed railway is established and used to investigate the cumulative residual deformation of high-speed railway bridge pier under mainshock-aftershock sequences and swarm type seismic sequences. The results show that the cumulative residual deformation of the bridge pier increases with earthquake number, and the increasing rates are different under different earthquake number. The residual deformation of bridge pier subjected to multiple earthquakes is accumulated and may exceed the limit of code.