• 한국산학기술학회논문지
• /
• 제10권7호
• /
• pp.1614-1620
• /
• 2009

최근 IP 멀티캐스팅 대신에 각광을 받고 있는 오버레이 멀티캐스팅 기법은 네트워크 응용계층의 서비스로써, 서버의 자원 활용과 네트워크의 대역폭에 대한 비용 면에서 유리하다. 본 논문에서는 효율적인 멀티미디어 서비스를 위하여 오버레이 멀티캐스팅 환경에서의 P2P 조인 스케줄링 정책을 제안한다. 본 논문의 성능 평가를 위하여 본 논문과 유사성을 가진 기법과 비교하여 멀티캐스트에 참여한 노드들의 평균노드 접속 수, 최대 대기 보장 시간의 위배 건수, 그리고 버퍼의 결함 확률을 실험을 하였다. 그 결과 약 15 ${\sim}$20%의 성능의 향상을 보여 주었다.

• 대한전기학회논문지:전력기술부문A
• /
• 제55권6호
• /
• pp.227-235
• /
• 2006

In this paper, autonomous separation methodology of faulted section based on network is proposed newly, which can minimize the outage effect as compared with the existing center-based faulted section separation method by determining and separating autonomously the faulted section by the free operation information exchange among IEDs on the feeder of distribution system. The all IEDs is designed in network in which client/server function is possible in order to separate autonomously the faulted section using PtP(Peer to Peer) communication. Also, Inference based solution of IED for the autonomous faulted section separation is designed by rules obtained from the analyzing results of distribution system topology. Here, the switch IEDs transmit on network the fault information utilizing on multi-casting communication method, at the fame time, determine selfly whether they operates or not by inferencing autonomously the faulted section using the inference-based solution after receiving the transmitted information. Finally, in order to verify the effectiveness and application possibility of the proposed methodology, the diversity fault cases are simulated for the typical distribution system.

• 한국정밀공학회지
• /
• 제34권1호
• /
• pp.59-63
• /
• 2017

We present a multi-sample array device based on a pneumatic system. Solenoid valves were used to control a micro valve in a pneumatic system. The use of a compressor together with a vacuum pump ensured that one outlet could supply both compression and vacuum pressure. The multi-sample array device was fabricated using conventional photolithography and PDMS casting. The device was composed of a multiplexer, sample array, and rinsing. The multiplexer could control four sample solutions injecting into the sample array chamber. Sample solution not arrayed was removed by DI-water from the rinsing inlet. To prevent trapping of microbubbles in the channel during injection of sample solution into the device, surfactant was added in PDMS solution to serve as a hydrophilic surface treatment. As a result, the device could be used as a sample array for 64 cases, using four samples and three columns of three chambers.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 1998년도 가을 학술발표논문집 Vol.25 No.2 (3)
• /
• pp.299-301
• /
• 1998

화상회의 프로그램에서 회의 참여자간에 멀티 캐스팅을 이용하여 정보를 전송할 경우 point-to-point 방법보다 네트윅 트래픽을 상당히 줄일 수 있다는 장점이 있으나. 각 회긔 참여자간 모두 같은 QoS를 지원할 수밖에 없다는 단점이 발생한다. 본 논문에서는 전송할 자료를 몇 가지 그룹으로 나누어 그룹 전송함으로 다양한 QoS를 원하는 방법을 제시하고자한다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 전기.전자공학 학술대회 논문집(II)
• /
• pp.1528-1531
• /
• 1987

Two graphics simulators, SOFTGRA and RACA, have been developed. The SOFTGRA has been implemented by the scan line algorithm using 2 shading models with multi-light sources. The RACA is a ray casting simulator which produces shadowed images with realism. Above two simulators run on Sun micro system and MV10000 and produce image data which are transfered into IBM AT with Metheus' Omega graphics board and drawn there.

• Fibers and Polymers
• /
• 제7권4호
• /
• pp.323-327
• /
• 2006

Poly(vinyl alcohol) (PVA)/multi-walled carbon nanotube (MWNT) composite films were prepared by casting a DMSO solution of PVA and MWNTs, whereby the MWNTs were dispersed by sonication. A significant improvement in the mechanical properties of the PVA drawn films was achieved by the addition of a small amount of MWNTs. The initial modulus and the tensile strength of the PVA drawn film increased by 30 % and 45 %, respectively, with the addition of 1 wt% MWNTs, which are close to those calculated from the rule of mixtures, and were strongly dependent upon the orientation of the PVA matrix. The mechanical properties, however, were not improved with a further increase in the MWNT content. The orientation of MWNTs in the composite was not well developed compared to that of the PVA matrix. This result suggests that the improvement of the molecular orientation of the PVA matrix plays a major role in the increase of the mechanical propeties of the drawn PVA/MWNT composite films.

• Food Science and Biotechnology
• /
• 제14권4호
• /
• pp.554-557
• /
• 2005

As a device for taste sensation, an 8-channel taste evaluation system was prepared and applied for discriminant analysis of marketed liquor. The biomimetic polymer membranes for the system were prepared through a casting procedure by employing polyvinyl chloride, bis (2-ethylhexyl)sebacate as plasticizer and electroactive materials such as valinomycin in the ratio of 33:66:1, and were separately attached over the sensitive area of ion-selective electrodes to construct the corresponding taste sensor array. The sensor array in conjunction with a double junction reference electrode was connected to a high-input impedance amplifier and the amplified sensor signals were interfaced to a personal computer via an A/D converter. When the signal data from the sensor array for 3 groups of marketed liquor like Maesilju, Soju and beer were analyzed by principal component analysis after normalization, it was observed that the 1st, 2nd and 3rd principal component were responsible for most of the total data variance, and the analyzed liquor samples were discriminated well in 2 dimensional principal component planes composed of the 1st-2nd and the 1st-3rd principal component.

• International Journal of Automotive Technology
• /
• 제3권2호
• /
• pp.47-52
• /
• 2002

The integration of CAD/CAM/CAE in product development is the key to realize concurrent engineering. Generally, different systems are employed in product development departments. These different systems create a lot of trout)toes such as difficulty in communication, misunderstanding and so on. A new approach to integrate CAD/CAM/CAE in one system based on CATIA thor the end-to-end process in cylinder head development is presented. Hulti Model Technology (MMT) is used to create consistent and associated CAD models for the end-to-end process in cylinder head development. The concept and method to create and organize multi models are discussed. A typical four-layer structure of HHT for mechanical products is defined. The multi level structure of the cylinder head models based on MMT is provided. The CAD models of cylinder head created based on MMT can be used as the consistent model. All models in the downstream of cylinder head development such as structure analysis, CFD, sand core design , casting simulation and so oil are associated with the CAD models. Practice shows the approach in this paper enables the development process to be carried concurrently and can obviously shorten time to the market, reduce product cost and improve product quality.

• 한국컴퓨터산업학회논문지
• /
• 제9권2호
• /
• pp.53-62
• /
• 2008

IPTV VOD 서버에 관계된 연구는, 궁극적으로 디스크 성능, 버퍼 사용도 그리고 네트워크 대역폭 등 서버의 주어진 자원 한계 아래에서 얼마만큼 사용자의 수를 최대화 하느냐에 주된 관심이 되고 있다. 최근 IP 멀티캐스팅 대신에 각광을 받고 있는 오버레이 멀티캐스팅 기법은 네트워크 응용계층의 서비스로써, 서버의 자원 활용과 네트워크의 대역폭에 대한 비용 면에서 유리하다. 본 논문에서는 효율적인 멀티미디어 서비스를 위하여 오버레이 멀티캐스팅 환경에서의 스토리지 파티션 정책을 제안한다. 시뮬레이션 해본결과 표준 방식보다 서비스 수와 서비스 처리시간에서 약 23% 정도 향상 성능을 보였는데, 이는 서비스 사용자의 수를 증가 시키는 문제와 밀접한 관련이 있다.

• Carbon letters
• /
• 제13권2호
• /
• pp.126-129
• /
• 2012

Nanocomposite films were made by a simple solution casting method in which multi-walled carbon nanotubes (MWCNT) and magnetite nanoparticles ($Fe_3O_4$) were used as dopant materials to enhance the electrical conductivity of chitosan nanocomposite films. The films contained fixed CNT concentrations (5, 8, and 10 wt%) and varying $Fe_3O_4$ content. It was determined that a 1:1 ratio of CNT to $Fe_3O_4$ provided optimal conductivity according to dopant material loading. X-ray diffraction patterns for the nanocomposite films, were determined to investigate their chemical and phase composition, revealed that nanoparticle agglomeration occurred at high $Fe_3O_4$ loadings, which hindered the synergistic effect of the doping materials on the conductivity of the films.