• 제목/요약/키워드: Multi-Agent Technology

검색결과 244건 처리시간 0.034초

$(Zr-DEHPA)/n-dodecane-HNO_3$ 금속함유 추출 계에 의한 악티나이드(III)및 RE의 공추출 및 상호 분리 (Evaluation of co- and Mutual Weparation for Actinide(III) and RE by a $(Zr-DEHPA)/n-dodecane-HNO_3$ Extraction System)

  • 이일희;임재관;정동용;양한범;김광욱
    • 방사성폐기물학회지
    • /
    • 제5권2호
    • /
    • pp.123-132
    • /
    • 2007
  • 본 연구는 실제 HLW 수준의 다성분 계 모의 용액으로부터 $Zr-DEHPA/NDD-HWO_3$ 금속함유 추출 계에 의한 Am-Cm/RE 원소의 공분리 및 이의 상호분리 연구를 수행하였다. 우선 금속함유 추출제인 Zr-DEHPA를 자체 제조하고, 제 3상 방지 조건 결정과 질산 농도, DEHPA 농도, Zr 함유량 등이 공추출에 미치는 영향을 평가하여 최적 조건으로 (15g/L Zr-1M DEHPA)/NDD-1M $HNO_3$ 추출 계를 설정하였다. 이때 추출률은 Am (81%), Cm (85%), RE 원소 (80% 이상), Mo (98%), Fe (85%), U (98%), Np (73%), 기타 원소 (5% 이하) 등으로 Am-Cm/RE의 공분리 적용성은 양호하나, U, Np, Mo, Fe의 선제거가 필요하고 특히 제 3상 형성 유발 물질인 Zr이 거의 함유되지 않아야 한다. 그리고 공추출된 Am-Cm/RE를 Am-Cm (역추출제 : 0.05M DTPA-1M Lactic acid-pH 3.6)${\rightarrow}RE$ (역추출제 : 5M $HNO_3$) 순으로 상호 분리하여 각각의 분리계수를 평가하였으며 이때 Am은 65.4%, Cm은 63.9% RE 원소(Y 제외)는 85% 이상이 역추출 되었다.

  • PDF

발포공정을 이용한 경량의 연질 세라믹 보온단열재의 제조 (Preparation of Flexible and Light Thermal Insulating Ceramic Composites Using Foaming Technology)

  • 이철태
    • 공업화학
    • /
    • 제26권1호
    • /
    • pp.59-66
    • /
    • 2015
  • 본 연구는 유기계 보온단열재의 장점인 경량성과 연질특성을 갖는 무기계 보온단열재의 제조를 위한 새로운 개념의 무기질 저온 발포 공정에 관한 것이다. 새로운 무기질 발포 공정은 섬유상인 해포석 및 규산알루미늄으로 하여금 발포체의 골격을 형성토록 하고, 저온에서 기체 발생이 가능한 발포제를 사용하여 무기질 섬유상 골격체가 팽창되어 공동을 형성하게 하며, 이 형성된 공동 속에 낮은 열전도도를 갖는 무기질 다포체인 팽창진주암을 채우는 것이다. 총괄적으로 무기질 재료를 고온 용융함이 없이 저온에서 무기질 발포체의 제조가 가능하게 된다. 이를 위해서 섬유상인 해포석의 해섬처리과정, 발포를 위한 섬유상 슬러리의 열처리공정 등 다양한 준비공정이 필요하며, 열처리 전 슬러리의 최적 조성물 조건이 요구된다. 제조된 발포체는 경량, 연질의 보온단열재로서의 겉보기 밀도, 내력 강도, 굽힘강도, 고내열성 등의 물성을 보여주었다.

지능형 IoT 미러 시스템을 활용한 인터랙티브 콘텐츠 서비스 구현 (Development of Interactive Content Services through an Intelligent IoT Mirror System)

  • 정원석;서정욱
    • 한국항행학회논문지
    • /
    • 제22권5호
    • /
    • pp.472-477
    • /
    • 2018
  • 본 논문에서는 지능형 IoT (internet of things) 미러 시스템을 통해 사용자의 우울증 예방을 위한 인터랙티브 콘텐츠 서비스를 구현한다. 인터랙티브 콘텐츠 서비스를 위해 IoT 미러 장치는 뇌파 헤드셋 디바이스로부터 집중도 및 명상도 데이터를 측정하고, 웹캠을 통해 다층 퍼셉트론 알고리즘으로 분류된 "슬픔", "분노", "혐오감", "중립", "행복" 및 "놀람"과 같은 표정 데이터를 측정한 후, oneM2M 표준을 준용한 IoT 서버로 전송한다. IoT 서버에 수집된 데이터는 제안한 병합 레이블링 과정을 거쳐 세 가지의 우울 단계(RED, YELLOW, GREEN)를 분류하는 기계학습 모델을 생성한다. 실험을 통해 k-최근접 이웃 모델로 우울 단계를 분류한 결과 약 93%의 정확도를 얻을 수 있었고, 분류된 우울 단계에 따라 가족, 친구 및 사회복지사에게 소셜 네트워크 서비스 에이전트를 통해 알림 메시지를 전송하여 사용자와 보호자 간의 인터랙티브 콘텐츠 서비스를 구현하였다.

상아질 접착제의 전단결합강도와 미세누출에 관한 연구 (A STUDY ON THE SHEAR BOND STRENGTHS AND MICROLEAKAGES OF THREE BONDING AGENTS ON DENTIN)

  • 김정호;조영곤;문주훈
    • Restorative Dentistry and Endodontics
    • /
    • 제22권2호
    • /
    • pp.680-692
    • /
    • 1997
  • New bonding agent systems have been supplied which operators can simply apply to conditioned tooth surfaces. The purpose of this study was to evaluate the shear bond strengths and the microleakages of three bonding agents and composite resins to dentin. Seventy-five extracted human maxillary and mandibular molar teeth were used in this study. For the shear bond strength test, the entire occlusal dentin surfaces of thirty teeth were exposed with Diamond Wheel Saw and smoothed with Lapping and Polishing Machine (South Bay Technology Co., U.S.A). For the microleakage test, Class V cavities were prepared in the buccal surfaces of fourtyfive teeth. They were randomly assigned into 3 groups according to dentin bonding agents ($Scotchbond^{TM}$ Multi-Purpose plus, ONE-$STEP^{TM}$ and Prime & $Bond^{TM}$)and composite resins (Z-100, $Aelitefil^{TM}$ and TPH $Spectrum^{TM}$) to be used. Bonding agents and composite resins were bonded to exposed dentin surfaces of the tooth crown and to Class V cavities on the buccal surfaces respectively according to manufacturer's directions. The shear bond strengths were measured by universal testing machine($U^{TM}$ AGS-100, Japan). In addition, the degree of micro leakage at the occlusal and gingival margin was examined by 2 % methylene blue and stereomicroscope(Olymous SZH 10, Japan). The results were as follows: 1. The shear bond strength to dentin was the highest value in SBMP-Plus group($16.68{\pm}7.38$ MPa) and the lowest value in Prime & Bond group($11.61{\pm}5.82$ MPa), but there was no significant difference of shear bond strength among three groups. 2. The degree of microleakage at both occlusal and gingival margin was showed the lowest in SBMP-Plus group and the highest in ONE-STEP group. 3. At both occlusal and gingival margin, there was significant difference of microleakage between SBMP-Plus and ONE-STEP/ Prime & Bond groups(p<0.05), but no significant difference of microleakage between ONE-STEP and Prime & Bond group(p>0.05).

  • PDF

Collaboration to Enhance Development and Application of Shiphandling Simulators

  • Shi, Chaojian;Chen, Jinbiao;Xiao, Baojia;Ding, Baocheng
    • 한국항해항만학회:학술대회논문집
    • /
    • 한국항해항만학회 2006년도 International Symposium on GPS/GNSS Vol.1
    • /
    • pp.459-464
    • /
    • 2006
  • It has been well proved that shiphandling simulators are efficient and useful facilities for training and education of cadets and seafarers. Most of the maritime universities and many maritime training institutes all over the world have installed shiphandling simulators, which play important roles in maritime education and training. However, most of the Shiphandling simulators are standalone facilities with diversities on system architectures, layouts and functions. STCW78/95 requires simulators used for simulator-based training shall be suitable for the selected objectives and training tasks. To ensure the shiphandling simulator facilities meet the requirements of STCW convention and other expanded applications, collaborated research and coordination are needed in development and application of shiphandling simulators. Performance standard should be established for shiphandling simulator systems considering the advanced research needs as well as the needs in education, training, and assessment of competence. Standardizing and exchanging shiphandling mathematical models will improve critical performance of the system. Cooperated research on model course and training assessment approaches will enhance the training standard. In addition, the rapid spread of the internet technology has shown a promising future of application of shiphandling simulators through internet. Research has been carried out on internet based integration of multiple shiphandling simulators. A multi-agent based system, including necessary hardware, has been developed. Collaborated operation of the system can be of benefit in filling the gaps of the technical and operational level and methodology between maritime universities, enhancing mutual understanding of the navigation customs and culture background among cadets and seafarers from different countries, facilitating communication and maritime English training, and extending the functions of shiphandling simulators.

  • PDF

구리CMP공정시 알루미나 슬러리 안정성을 위한 Hydrogen peroxide의 적용 (Application of Hydrogen Peroxide for Alumina Slurry Stability in Cu CMP)

  • 이도원;김남훈;김인표;김상용;김태형;서용진;장의구
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2003년도 추계학술대회 논문집 Vol.16
    • /
    • pp.136-139
    • /
    • 2003
  • Copper has attractive properties as a multi-level interconnection material due to lower resistivity and higher electromigration resistance as compared with Alumina and its alloy with Copper(0.5%). Among a variety of agents in Copper CMP slurry, $H_2O_2$ has commonly been used as the oxidizer However. $H_2O_2$ is so unstable that it requires stabilization to use as oxidizer Hence, stabilization of $H_2O_2$ is a vital process to get better yield in practical CMP process. In this article the stability of Hydrogen Peroxide as oxidizer of Copper CMP slurry has been investigated. When alumina abrasive was used, $\gamma$-particle Alumina C had a better stability than $\alpha$-particle abrasive. As adding KOH as pH buffering agent, $H_2O_2$ stability in slurry decreased. Urea hydrogen peroxide was used as oxidizer, an enhanced stability was gotten. When $H_3PO_4$ as $H_2O_2$ stabilizer was added, the decrease of $H_2O_2$ concentration in slurry became slower. Even though adding $H_2O_2$ in slurry after bead milling lead to better stability than in advance of bead milling, it had a lower dispersibility.

  • PDF

CPB용 다기능성 일욕형 조제 개발 (Development of one batch type and multi functional agent for CPB process)

  • 박법;조연정;구강
    • 한국염색가공학회:학술대회논문집
    • /
    • 한국염색가공학회 2011년도 제45차 학술발표회
    • /
    • pp.32-32
    • /
    • 2011
  • Cold Pad batch(CPB)처리에 의한 직물 전처리 공정은 특히 저온처리방식이라 에너지 소모가 적으며, 발생되는 대기오염 및 용수사용량이 연속식 방법에 비해 약 30%이상 절감되는 경제적 친환경적인 기술로 특히 정련과 표백을 동시에 수행할 수 있다. CPB 전처리는 호발, 정련, 표백을 포함하는 공정으로 일욕으로 처리시 패딩, 수세, 와인딩 공정을 단축시키기 때문에 약품 소비량 감소와 에너지 사용 절감 효과가 있어 전 세계적으로 확산되고 있는 Green Technology이다. 본 연구에서는 CPB용 다기능성 일욕형 조제에 개발하기 위해 전처리시 정련, 표백성에 대한 연구를 진행하였다. 시료는 NP/C 교직물을 사용하였고, CPB 처리액은 원료 및 첨가용제를 여러 비율로 조합하여 조제를 formulation 하였다. 이를 사용하여 패딩, 배칭, 수세 및 건조하여 전처리를 하였다. 표백된 정도를 파악하기 위해 Macbeth Color Eye-3100을 사용하여 백도(whiteness(CIE))를 5회 평균값을 구하여 측정 하였다. 정련된 정도를 비교하기 위해 C.I.Reactive Red 238의 2g/l 용액을 사용하여 wicking test를 하였다. 1분간 흡수높이를 측정하여 정련성을 확인하였다. 각각의 첨가용제를 비교한 결과 isopropyl alcohol을 첨가 시 hexylene glycol, butyl diglycol를 첨가한 경우에 비해 높은 흡수높이를 나타내었다. isopropyl alcohol의 농도별 정련성을 알아보기 위해 0%, 5%, 10%의 농도로 처리하였다. 그 결과 isopropyl alcohol 첨가량이 많을수록 정련성이 증가하였다. 다기능성 일욕조제의 문제점인 알칼리 안정성 부족을 보완하기 위해 polyoxyethlylene tridecyl ether derivatieves(LAP300)의 인화물을 첨가하였다. LAP300의 첨가량이 증가할수록 정련성이 증가하는 경향을 나타내었다. 알칼리 안정성 및 타 성능(정련성, 백도, 킬레이트 성)을 종합적으로 평가하여 향후, CPB용 다기능성 일욕형 조제의 개발에 대한 연구를 진행할 계획이다.

  • PDF

정보처리 관점에서의 서사 텍스트 분석에 관한 연구 - 네 가지 전산적 방법론을 중심으로 (A study on narrative text analysis from the perspective of information processing - focusing on four computational methodologies)

  • 권호창
    • 트랜스-
    • /
    • 제13권
    • /
    • pp.141-169
    • /
    • 2022
  • 서사 텍스트에 대한 분석은 학술적으로나 실용적으로 중요하게 여겨져 왔으며 여러 관점과 방법으로 이루어져 왔다. 이 논문에서는 정보처리 관점에서의 전산적 서사 분석 방법론을 살펴보았다. 정보처리 관점에서 서사의 창작과 수용은 서사 텍스트에 의해 매개된 양방향적 코딩 과정이고, 서사 텍스트는 다층적으로 구조화된 코드라고 할 수 있다. 이 논문에서는 이런 관점을 공유하는 네 가지 방법론 - 캐릭터 네트워크 분석, 텍스트 마이닝과 감성 분석, 사건 구성의 연속성 분석, 서사 에이전트의 지식 분석 -을 사례와 함께 살펴보았다. 이를 통해 서사 분석에 있어 전산적 방법론의 메커니즘과 가능성을 확인하였다. 결론에서는 전산적 서사 분석의 의의와 부작용을 살펴보고, 인문학과 과학기술 통섭에 바탕한 인간-컴퓨터 협업 모델 설계의 필요성을 논의하였다. 이를 통해 미적으로 창의적이고, 윤리적으로 선하며, 정치적으로 진보적이고, 인지적으로 정교한 서사를 보다 효과적으로 만들어 나갈 수 있음을 주장하였다.

Wearable Computers

  • Cho, Gil-Soo;Barfield, Woodrow;Baird, Kevin
    • 섬유기술과 산업
    • /
    • 제2권4호
    • /
    • pp.490-508
    • /
    • 1998
  • One of the latest fields of research in the area of output devices is tactual display devices [13,31]. These tactual or haptic devices allow the user to receive haptic feedback output from a variety of sources. This allows the user to actually feel virtual objects and manipulate them by touch. This is an emerging technology and will be instrumental in enhancing the realism of wearable augmented environments for certain applications. Tactual displays have previously been used for scientific visualization in virtual environments by chemists and engineers to improve perception and understanding of force fields and of world models populated with the impenetrable. In addition to tactual displays, the use of wearable audio displays that allow sound to be spatialized are being developed. With wearable computers, designers will soon be able to pair spatialized sound to virtual representations of objects when appropriate to make the wearable computer experience even more realistic to the user. Furthermore, as the number and complexity of wearable computing applications continues to grow, there will be increasing needs for systems that are faster, lighter, and have higher resolution displays. Better networking technology will also need to be developed to allow all users of wearable computers to have high bandwidth connections for real time information gathering and collaboration. In addition to the technology advances that make users need to wear computers in everyday life, there is also the desire to have users want to wear their computers. In order to do this, wearable computing needs to be unobtrusive and socially acceptable. By making wearables smaller and lighter, or actually embedding them in clothing, users can conceal them easily and wear them comfortably. The military is currently working on the development of the Personal Information Carrier (PIC) or digital dog tag. The PIC is a small electronic storage device containing medical information about the wearer. While old military dog tags contained only 5 lines of information, the digital tags may contain volumes of multi-media information including medical history, X-rays, and cardiograms. Using hand held devices in the field, medics would be able to call this information up in real time for better treatment. A fully functional transmittable device is still years off, but this technology once developed in the military, could be adapted tp civilian users and provide ant information, medical or otherwise, in a portable, not obstructive, and fashionable way. Another future device that could increase safety and well being of its users is the nose on-a-chip developed by the Oak Ridge National Lab in Tennessee. This tiny digital silicon chip about the size of a dime, is capable of 'smelling' natural gas leaks in stoves, heaters, and other appliances. It can also detect dangerous levels of carbon monoxide. This device can also be configured to notify the fire department when a leak is detected. This nose chip should be commercially available within 2 years, and is inexpensive, requires low power, and is very sensitive. Along with gas detection capabilities, this device may someday also be configured to detect smoke and other harmful gases. By embedding this chip into workers uniforms, name tags, etc., this could be a lifesaving computational accessory. In addition to the future safety technology soon to be available as accessories are devices that are for entertainment and security. The LCI computer group is developing a Smartpen, that electronically verifies a user's signature. With the increase in credit card use and the rise in forgeries, is the need for commercial industries to constantly verify signatures. This Smartpen writes like a normal pen but uses sensors to detect the motion of the pen as the user signs their name to authenticate the signature. This computational accessory should be available in 1999, and would bring increased peace of mind to consumers and vendors alike. In the entertainment domain, Panasonic is creating the first portable hand-held DVD player. This device weight less than 3 pounds and has a screen about 6' across. The color LCD has the same 16:9 aspect ratio of a cinema screen and supports a high resolution of 280,000 pixels and stereo sound. The player can play standard DVD movies and has a hour battery life for mobile use. To summarize, in this paper we presented concepts related to the design and use of wearable computers with extensions to smart spaces. For some time, researchers in telerobotics have used computer graphics to enhance remote scenes. Recent advances in augmented reality displays make it possible to enhance the user's local environment with 'information'. As shown in this paper, there are many application areas for this technology such as medicine, manufacturing, training, and recreation. Wearable computers allow a much closer association of information with the user. By embedding sensors in the wearable to allow it to see what the user sees, hear what the user hears, sense the user's physical state, and analyze what the user is typing, an intelligent agent may be able to analyze what the user is doing and try to predict the resources he will need next or in the near future. Using this information, the agent may download files, reserve communications bandwidth, post reminders, or automatically send updates to colleagues to help facilitate the user's daily interactions. This intelligent wearable computer would be able to act as a personal assistant, who is always around, knows the user's personal preferences and tastes, and tries to streamline interactions with the rest of the world.

  • PDF

3D 프린터로 제작된 CT 팬톰을 이용한 물리적 관심영역과 설정 관심영역의 크기에 따른 하운스필드의 비교 (Comparison of Hounsfield Units by Changing in Size of Physical Area and Setting Size o f Region o f Interest b y Using the CT Phantom Made with a 3D Printer)

  • 성열훈
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제38권4호
    • /
    • pp.421-427
    • /
    • 2015
  • 본 연구에서는 3차원(dimension, D) 프린터로 자체 제작한 팬톰을 이용하여 관전압과 관전류량 변화 중심으로 균일한 조직의 물리적 영역 크기 변화에 의한 관심영역(region of interest, ROI)와 설정치 영역 크기 변화에 의한 ROI 내에서의 하운스필드(hounsfield units, HU)의 변화를 알아보고자 하였다. 본 실험에서는 단면영상과 HU를 획득하기 위해 4-다중 검출기 전산화단층영상장비를 이용하였다. 팬톰 제작은 용융적층조형술(fused deposition modeling, FDM) 프린팅 방식의 3D 프린터 기기를 사용하였다. 팬톰의 구조는 $160{\times}160{\times}50mm$의 원통형으로 33 mm, 24 mm, 19 mm, 16 mm, 9 mm 크기의 원형 구멍을 대칭되도록 두 쌍으로 설계하였다. 구멍에는 증류수를 혼합한 조영제를 충전하였다. X선의 관전압과 관전류량는 각각 90 kVp, 120 kVp, 140 kVp 그리고 50 mAs, 100 mAs, 150 mAs로 변화시켜 단면영상을 획득하였다. 획득된 영상의 ROI 내 HU 측정은 image J 프로그램를 이용하였다. 그 결과, 관전류량보다는 관전압이 HU에 영향을 주고 있음을 확인하였다. 그리고 균일한 밀도를 갖는 물질이라도 물리적 영역 크기가 작아질수록 HU는 감소하였으며 ROI 설정 영역 크기가 작아질수록 HU는 증가하여 HU가 변화한다는 것을 확인할 수 있었다. 따라서 5 HU 이내의 노이즈 수준에서 ROI를 최대한 크게 설정하는 것이 물리적 영역 크기와 ROI 설정 영역 크기에 의한 변이를 최소화시킬 수 있는 방법이라고 판단된다.