• Current Photovoltaic Research
• /
• 제6권1호
• /
• pp.1-11
• /
• 2018

Current major photovoltaic (PV) market share (> 60%) is being occupied by the multicrystalline (mc)-silicon solar cells despite of low efficiency compared to single crystalline silicon solar cells. The diamond wire sawing technology reduces the production cost of crystalline silicon solar cells, it increases the optical loss for the existing mc-silicon solar cells and hence its efficiency is low in the current mass production line. To overcome the optical loss in the mc-crystalline silicon, caused by the diamond wire sawing, next generation texturing process is being investigated by various research groups for the PV industry. In this review, the limitation of surface structure and optical loss due to the reflectivity of conventional mc-silicon solar cells are explained by the typical texturing mechanism. Various texturing technologies that could minimize the optical loss of mc-silicon solar cells are explained. Finally, next generation texturing technology to survive in the fierce cost competition of photovoltaic market is discussed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 추계학술대회 논문집
• /
• pp.68-69
• /
• 2007

To make cost-effective solar cells, We have to use low cost material or make short process time or high temperature process. In solar cells, formation of emitter is basic and important technique according to build-up P-N junction. Diffusion process using spin-on dopants has all of this advantage. In this paper, We investigated n+ emitter formation spin-on dopants to apply crystalline silicon solar cells. We known variation of sheet resistance according to variation of temperature and single-crystalline and multi-crystalline silicon wafer using Honeywell P-8545 phosphorus spin-on dopants. We obtain uniformity of sheet resistance within 3~5% changing RPM of spin coater.

• Korean Chemical Engineering Research
• /
• 제46권1호
• /
• pp.118-123
• /
• 2008

본 연구에서는 multi-walled nanotubes(MWNTs)를 산소-불소 혼합가스로 처리하여, 표면 관능기를 분석하고, 그 처리효과를 조사하였다. 산소-불소 처리된 MWNTs의 표면특성은 FT-IR 그리고 XPS로 분석하였다. 처리된 탄소지지체에 백금 나노입자를 담지시킨 후, 입자 결정성크기와 담지함량을 조사하였다. 위 탄소지지체에 담지된 촉매의 전기화학적 특성은 전류-전압 곡선을 측정하여 분석하였다. 표면분석의 결과로부터, 산소 및 불소를 포함한 화학관능기가 탄소지지체에 도입된 사실을 알 수 있었다. 산소-불소 함량은 처리온도가 $100^{\circ}C$ 일때 최고값을 나타냈다. Pt/100-MWNTs 샘플의 경우, 3.5 nm의 최소의 결정성 크기를 보였고, 9.4%의 가장 높은 담지율을 나타냈다. 그러나, 이보다 높은 온도에서 처리된 샘플의 경우, 결정성 크기가 증가하였고, 담지율은 감소하였다. 이러한 결과를 통해, 결정성 크기와 담지율을 산소-불소 처리온도를 변화시켜 제어할 수 있었음을 제시하였다. 이와 연관되어, 촉매의 전기화학적 활성이 $100^{\circ}C$ 처리까지는 증가하다가, $200^{\circ}C$와 $300^{\circ}C$의 경우에는 감소하였다. Pt/100-MWNTs 샘플은 비교샘플 중에서 최고의 비전류밀도(specific current density)인 120 mA/mg 수치를 나타냈다.

• Current Photovoltaic Research
• /
• 제5권1호
• /
• pp.25-27
• /
• 2017

Nanoscale textured black silicon has attracted intensive attention due to its great potential as applications in multicrystalline silicon-based solar cells. It absorbs sunlight over a broad range of wavelengths but introduces large recombination centers, non-uniform doping into cell. In this study, we present a metal-assisted chemical etching technique plus alkaline etching process to fabricate nanoscale pyramid structures with optimized condition. To make the structures, silver nanoparticles-loaded mc-Si wafer was submerged into $H_2O_2/HF$ solution first for nanohole texturing the wafer and textured wafer etched again with KOH solution for making nanoscale pyramid structures. The average reflectivity (350-1050 nm) is about 8.42% with anti-reflection coating.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.109-109
• /
• 2006

Screen printing (SP) metal contact is typically applied to the solar cells for mass production. However, SP metal contact has low aspect ratio, low accuracy, hard control of the substrate penetration and unclean process. On the other hand, photo lithograpy (PL) metal contact can reduce defects by metal contact. In this investigation, PL metal contact was obtained the multi-layer structure of Ti/Pd/Ag by e-beam process. We applied SP metal contact and PL metal contact to single crystalline silicon solar cells, and demonstrated the difference of conversion efficiency. Because PL metal contact silicon solar cell has Jsc (short circuit current density) better than silicon solar cell applied SP metal contact.

• Coupled systems mechanics
• /
• 제5권4호
• /
• pp.341-353
• /
• 2016

Manufactures of multi-crystalline silicon ingots by means of the directional solidification system (DSS) is important to the solar photovoltaic (PV) cell industry. The quality of the ingots, including the grain size and morphology, is highly related to the shape of the crystal-melt interface during the crystal growth process. We performed numerical simulations to analyze the thermo-fluid field and the shape of the crystal-melt interface both for steady conditions and transient processes. The steady simulations are first validated and then applied to improve the hot zone design in the furnace. The numerical results reveal that, an additional guiding plate weakens the strength of vortex and improves the desired profile of the crystal-melt interface. Based on the steady solutions at an early stage, detailed transient processes of crystal growth can be simulated. Accuracy of the results is supported by comparing the evolutions of crystal heights with the experimental measurements. The excellent agreements demonstrate the applicability of the present numerical methods in simulating a practical and complex system of directional solidification system.

• 대한기계학회논문집A
• /
• 제40권1호
• /
• pp.23-31
• /
• 2016

본 연구에서는 연성 금속재료의 판상형 인장 시편에 대한 동적 물성을 측정하기 위한 인장형 홉킨슨 바(TSHB, Tensile split Hopkinson bar)의 수정 방법에 대해 논의하고, 이를 이용하여 고순도 알루미늄 단결정 및 멀티결정재의 동적 물성을 측정하였다. 시편의 초기 미세조직 및 결정학적 방위는 전자후방 산란회절(EBSD, Electron backscattered diffraction) 분석을 통하여 측정하였으며, 동적 변형 후 파단 형상을 광학 현미경을 통하여 확인하였다. 고속인장 변형 중 시편 내부에 발생하는 변형 분포는 디지털 이미지 상관(DIC, Digital image correlation) 기법을 이용하여 측정하였다. 이를 통해 동적 변형 중 나타나는 알루미늄의 거시적인 소성 변형과 결정학적 방위 및 미세 조직과의 상관관계에 대해 논의하였다.

• 한국전기전자재료학회논문지
• /
• 제25권12호
• /
• pp.1015-1020
• /
• 2012

Resistance of the front electrode is the highest proportion of the ingredients of the series resistance in crystalline silicon solar cell. While resistance of the front electrode is decreased with larger area, it induces the optical loss, causing the conversion efficiency drop. Therefore the front electrode with high aspect ratio increasing its height and decreasing is necessary for high-efficiency solar cell in considering shadowing loss and resistance of front electrode. In this paper, we used the screen printing method to form high aspect ratio electrode by multiple printing. Screen printing is the straightforward technology to establish the electrodes in silicon solar cell fabrication. The several printed front electrodes with Ag paste on silicon wafer showed the significantly increased height and slightly widen finger. As a result, the resistance of the front electrode was decreased with multiple printing even if it slightly increased the shadowing loss. We showed the improved electrical characteristics for c-Si solar cell with repeatedly printed front electrode by 0.5%. It lays a foundation for high efficiency solar cell with high aspect ratio electrode using screen printing.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 하계학술대회 논문집
• /
• pp.643-645
• /
• 2008

Stainless steel 304 and 316 plates were deposited with the multi-layered coatings of titanium film (0.1um) and gold film (1-2um) by an electron beam evaporation method. The XRD patterns of the stainless steel plates modified with the multi-layered coatings showed the crystalline phases of the external gold film and the stainless steel substrate. Surface microstructural morphologies of the stainless steel bipolar plates modified with multi-layered coatings were observed by AFM and FE-SEM images. The external gold films formed on the stainless steel plates showed microstructure of grains of about 100nm diameter. The grain size of the external surface of the stainless steel plates increased with the gold film thickness. The electrical resistance and water contact angle of the stainless steel bipolar plates covered with multi-layered coatings were examined with the thickness of the external gold film.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2000년도 하계학술대회 논문집
• /
• pp.243-246
• /
• 2000

The sputtering systems mainly consist of the three-target holder. The target and substrate were the on-axis type. The MgO and STO substrate were used for the deposition of each layer. The optimum conditions of single-layer thin film were investigated from the SEM images and the XRD patterns. Based on the above conditions, the multi-layer thin films such as YBaCuO/LaGaO/Au/Nb and YBaCuO/Au/Nb were fabricated. The crystalline, the electrical Properties, the energy gap structure and the characteristics of the tunneling barrier on the multi-layer thin film have been investigated and characterized.