• Journal of Advanced Navigation Technology
• /
• v.21 no.6
• /
• pp.572-578
• /
• 2017

As the demand of high accuracy positioning for dynamic users increases, Network RTK is actively researched for dynamic users. Network RTK is a system which provides precise positioning in the range of about 50 to 70km radius using carrier phase measurements from several reference stations. By configuring multiple clusters, which provide Network RTK corrections independently, as a single system, it could provide precise positioning for a wider area. In this paper, we have studied how to efficiently operate multiple clusters in the Korean Peninsula. We analyzed the computational load according to the configuration of a multi-cluster system and proposed a method of selecting the main reference station and system infrastructure configuration for efficient operation. In order to analyze the effects of each proposed method, 71 clusters were constructed using the reference stations of the National Geographic Information Institute and simulations were conducted. As a result of the simulation, system computation amount was reduced by 66 % and system configuration cost was reduced by 90 %.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.3
• /
• pp.491-498
• /
• 2017

GPS (global positioning system) is a popular system that provides location information by measuring arrival time difference at the receiver between several GPS satellite signals. GPS is widely used in commercial area as well as military systems. Reliable GPS signal reception is more important in the military applications such as guided missiles. However, since the carrier frequencies of the GPS signals are well known and the received power is extremely low, the GPS systems are vulnerable to intentional jamming attacks. To remove jammers while maintaining GPS signals at the received signals, a popular technique is an adaptive beam steering method based on array antenna. Among adaptive beam steering techniques, this paper considers MVDR (minimum variance distortionless response) algorithm, and proposes a new adaptive technique that preserves the received signals at desired directions, but removes the unknown jamming signals adaptively. The performance of the proposed method is verified through computer simulation.

• Journal of the Korea Convergence Society
• /
• v.1 no.1
• /
• pp.23-29
• /
• 2010

The various kinds of application is distributed for the Smart phone user recently. There is the advantage that the open source application on Android operating system based Smart phone supports a multi tasking service. Layar, Wikitude, and Sherpa and the other applications using the GPS location information like an a2b etc. were developed in the Smart phone environment. However, the existing Cell-ID based location information can be directly collected by the mobile ISP unit which the mobile carrier installs, the personal privacy problem occurs. Therefore, the personal location information is possible to be exposed publicly without any access control procedure. Therefore, in this research, the self-control mechanism on the GPS location information at the Smart phone is designed and presented. Through this, it is possible to develop diverse applications providing enhanced access control and GPS location management on the Android based Smart Phone.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.40 no.12
• /
• pp.155-160
• /
• 2003

Owing to the advances in ADC and DSP technologies, signals in If band, which once had to be processed in analog technology, can new be digitally processed. This is referred to as "Digital IF" or "Digital Radio", which is a preliminary stage of SDR. Applying the digital radio technology to a multi-carrier receiver design, a processing gain is generated through an over-sampling of input data. In the digital receiver, decimation is performed for reducing the computational complexity CIC and half band filter is used together with the decimation as an anti-alising filter. The CIC filter, however, should introduce the roll-off phenomenon in the passband, which causes the receiving performance to be considerably degraded due to the distorted Passband flatness of receiving filter. In this paper, we designed a CIC roll-off compensation filter for W-CDMA digital receiver. The performance of the proposed compensation filter is confirmed through computer simulations in such a way that the BER is minimized by compensating the roll-off characteristics.off characteristics.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.10
• /
• pp.2230-2236
• /
• 2012

Currently, the AC-to-DC power conversion system using diode rectifiers is mainly used in large vessels. Also, to reduce the total harmonic distortion(THD) of current and voltage, this system requires an additional phase-shifting transformer which can be powered multi-pulses. In this case, due to the installation of the transformer, the spatial or economic loss occurs. This paper presents a novel active rectification scheme using silicon controlled rectifier(SCR) or insulated gate bipolar transistor(IGBT) devices on behalf of the diode rectifiers which are currently operating in large vessels such as LNG Carrier(LNGC). The proposed system can use the low voltage source and reduce current and voltage harmonics generated by nonlinear loads connected to the power distribution bus and save economic costs by removing the phase-shifting transformers which are used in conventional system. Computer simulations are performed under the electric propulsion system which is operating in current large vessel. The results are shown in support of the improvement of THD included in the current and voltage wave forms of propulsion motor.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.29 no.12A
• /
• pp.1340-1348
• /
• 2004

In this paper, we propose a PAPR-minimized sequence mapping scheme that achieves the minimum Peak-to-Average Power Ratio (PAPR) and the minimum amount of computations for the OFDM system. To reduce the PAPR, the mapping table is created with information about block index and symbol patterns of the lower signal power. When the input data sequence comes, it performed division by the block length to find the quotient and remainder. The symbol pattern of the lower signal power can be found in terms of the block index as the quotient in the mapping table and transmitted with remainder as the side information to distinguish and recover the original data sequence in the receiver. The two methods with the proposed mapping scheme are proposed in this paper. One is with mapping table to recover the O%M signal in both transmitter and receiver. The other is with mapping table only in transmitter to reduce the load and the complexity in the mobile system. We show that this algorithm provides the PAPR reduction, the simple processing and less computational complexity to be implemented for the multi-carrier system.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.44 no.10
• /
• pp.47-54
• /
• 2007

Since impulse-radio-based ultra wideband (IR-UWB) do not use carrier frequency but use very short pulse to transmit data it sends data not continuously but discretely and this feature gives the potential to reduce collision in multi-user environment. In this paper, we analyse characteristic of IR-UWB and propose a new collision paradigm, Collision Distribution which changes collision level from packet to pulse. In Collision Distribution mechanical each node sends data with its own pulse interval in random time, distributed manner. It prevents packet drop due to packet collision. We show that Collision Distribution can reduce packet error and can provide real time packet transmission with analysis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.19 no.3
• /
• pp.448-462
• /
• 1995

The purpose of this study was on the development of jeans via conjoint analysis and marketing strategies for each segmented market. The questionnaire was composed vervel card and defining the proper marketing strategies for each segmented market. The 269 usable data was distributed to the Univ student and carrier women through multi- stage , ;ambling. The statistical results were processed by the SPSS, PC MDS, and MANZANOLA program. The used methods of statistical data were conjoint analysis, KYST, PROFIT, factor analysis, frequency, one-way ANOVA, SNK, and paired t-test. The results of this study can be summaries as follows: 1. In competitor analysis, Korean brands were in low price zone, but foreign in high price and character style zone. 2. There was significant differences Korean brands and foreign brands on evaluating. On the basis of the perceptual maps, most of Korean brands were evaluated as having a good price and most of foreign brands were evaluated as having a good design. 3. The optimal jeans has the well-known brand, the price of less than 30, 000 won, traditional style, and good quality. In four attributes of clothing buying process, brand is most important attribute of jeans. Segment market 1.All the jeans that they have is Korean brand. Income, amount spent per month on clothing, how many having jeans is low market. Self-centered factor is lowest. In the clothing sari ales lifestyle, they considered most conviniance. Segment market 2-They have one foreign brand jeans. Income, amount spent per month on clothing, how many having jeans is low market. Self-centered factor is lowest Segment market 3-They have two foreign brand jeans. Income, amount spent pet month on clothing, how many having jeans is high market. Self-centered factor is high. In the clothing variables lifestyle, they considered brand, continuance, and character. Segment market 4-They have more than three foreign brand. Income amount spent per month on clothing, and how many having jeans is high market. Self-centered factor is high. In the clothing variables lifestyle, they considered most brand, and character.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.1 s.343
• /
• pp.133-142
• /
• 2006

This paper suggests an efficient method of protection ratio(PR) calculation and shows some results of point-to-point radio relay system for frequency coordination. The proposed PR can be expressed as a function of C/N of modulation scheme, noise-to-interference ratio(N/I), multiple interference allowance, fade margins of multi-Path and rain attenuation and net filter discrimination. And PR calculation is performed in view of fade margin, modulation scheme, distance, and interference for actual point-to-point radio relay frequency. According to results for 6.2 GHz, 64-QAM and 60 km at BER 10-6, fade margin and co-channel Protection ratio reveal 41.1dB and 74.9 dB, respectively The merit of presented method provides a systematic and easy calculation by means of PR correction factor related with various parameters and can apply the same concept to frequency coordination of millimeter wave radio relay system.

• Transactions on Electrical and Electronic Materials
• /
• v.12 no.3
• /
• pp.115-118
• /
• 2011

Process characterization of the chemical mechanical polishing (CMP) process for undensified phosphosilicate glass (PSG) film is reported using design of experiments (DOE). DOE has been addressed to experimenters to understand the relationship between input variables and responses of interest in a simple and efficient way. It is typically beneficial for determining the adequate size of experiments with multiple process variables and making statistical inferences for the responses of interests. Equipment controllable parameters to operate the machine include the down force (DF) of the wafer carrier, pressure on the backside of the wafer, table and spindle speed (SS), slurry flow rate, and pad condition. None of them is independent; thus, the interaction between parameters also needs to be indicated to improve process characterization in CMP. In this paper, we have selected the five controllable equipment parameters, such as DF, back pressure (BP), table speed (TS), SS, and slurry flow (SF), most process engineers recommend to characterize the CMP process with respect to material removal rate (RR) and film uniformity as a percentage. The polished material is undensified PSG. PSG is widely used for the plananization in multi-layered metal interconnects. We identify the main effect of DF, BP, and TS on both RR and film uniformity, as expected, by the statistical modeling and analysis on the metrology data acquired from a series of $2^{5-1}$ fractional factorial design with two center points. This revealed the film uniformity of the polished PSG film contains two and three-way interactions. Therefore, one can easily infer that the process control based on better understanding of the process is the key to success in semiconductor manufacturing, typically when the wafer size reaches 300 mm and is continuously scheduled to expand up to 450 mm in or little after 2012.