• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.28 no.12C
• /
• pp.1192-1199
• /
• 2003

In this paper, we investigate the effect of pulse repetition frequency (PRF) and slot interval on the throughput performance of the ultra wide band (UWB) wireless communication system in multi-path channels, and based on these observations, a data throughput control using PRF and slot interval is proposed for maximizing the effective throughput. Recently, due to many desirable features of the UWB system, it has drawn much attention especially for short-range high-speed data transmission. The UWB system has two parameters to determine its data throughput; pulse repetition frequency and slot interval. In the multi-path channel with additive white Gaussian noise, the UWB system suffers from the inter-pulse interference (IPI) and noise, which result in degradation of system performance. The UWB system can vary the two parameters to maintain and/or improve the system performance. In this paper, we demonstrate the effects of the two parameters on the data throughput of the UWB system in various multi-path indoor channels through computer simulation, and show that the variable data rate approach designed based on the observations is superior to the fixed data rate one in terms of effective throughput performance.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.147.4-147
• /
• 2001

This work presents the robust controller and the LQG/LTR controller for the stewart platform. To simplify the dynamics we combine equation of the stewart platform and linearized one of hydraulic actuators not considered condensability of the fluid. Through the connection of two dynamic equations we can omit force feedback process of actuators and design controllers for the whole system. We applied two controllers on the stewart platform and show the adequacy controllers through the result of simulation and experiment.

• Proceedings of the SAREK Conference
• /
• 2005.06a
• /
• pp.204-204
• /
• 2005

• Proceedings of the SAREK Conference
• /
• 2004.06a
• /
• pp.229-229
• /
• 2004

• Honam Mathematical Journal
• /
• v.8 no.1
• /
• pp.21-49
• /
• 1986

A class of singular quadratic control problem is considered. The state is governed by a higher order system of ordinary linear differential equations and very general nonstandard boundary conditions. These conditions in many important cases reduce to standard boundary conditions and because of the conditions the usual controllability condition is not needed. In the special case where the coefficient matrix of the control variable in the cost functional is a time-independent singular matrix, the corresponding optimal control law as well as the optimal controller are computed. The method of investigation is based on the theory of least-squares solutions of multi-valued operator equations.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 1993.06a
• /
• pp.1109-1113
• /
• 1993

A refuse incineration plant is a complex process, whose multi-variable control problems can not be solved conventionally by deriving an exact mathematical model of the process. The usage of advanced fuzzy technologies within the suitable development methodology is demonstrated by a controller implemented for the refuse incineration plant in Hamburg-Stapelfeld, Germany.

• Journal of KIISE:Computing Practices and Letters
• /
• v.6 no.3
• /
• pp.299-310
• /
• 2000

In this paper, we designed and implemented a personal VOD server using multi-thread for the real-time services of video data to the users. The system consists of service manager, disk manager, and network manager. The service manager controls the user admission to the system using the VBR(Variable Bit Rate) characteristics of MPEG (Moving Picture Experts Group) video data. The disk manager provides the functions for VCR-like operations. The disk manager reads blocks from the disk by the size of GOP(Group of Pictures) and buffers the data to the user's thread. The network manager uses TCP/IP for the communication between the server and the client. The communication starts from the client and the VOD server must respond to this request. The implemented personal VOD system shows an acceptable performance.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2004.10a
• /
• pp.54-57
• /
• 2004

Almost all injection molds have multi-cavity runner for mass production, which are designed with geometrically balanced runner system in order to minimize filling imbalance between cavity to cavity during processing. However, even though geometrically balanced runner is used, filling imbalances have sometimes been observed. These filling imbalances have historically been considered as result of uneven mold temperature and mold deflection, but it actually results from non-symmetrically shear, pressure, temperature distribution within melt material as it flows through the runner system. Filling imbalance could be decreased by modifying processing conditions that are related to shear, pressure, temperature such as injection rate, mold temperature, injection pressure, melt temperature. In this study, a series of experiment was conducted using Taguchi method to determine which processing condition influence as the primary cause of filling imbalance in geometrically balanced runner system. As a result of experiments, this paper could present an optimal processing condition to minimize variable that brings about filling imbalance geometrically balanced runner system

• Journal of the Korea Institute of Military Science and Technology
• /
• v.23 no.4
• /
• pp.417-425
• /
• 2020

Multi-resolution modeling(MRM) is required when simulating objects in variable resolution and can be applied for interoperating systems, which simulate objects in fixed resolution. However, most interoperation middleware do not support MRM, so participating models must handle several issues to simulate MRM system. In this paper, we propose an interoperation system, which is composed of several different resolution models, based on the High Level Architecture and Run-Time Infrastructure(HLA/RTI). In the proposed architecture, each model participates to a HLA federation through MRM adapter application, which supports data resolution conversion and HLA services while communicating with the model. MRM adapter application can be implemented based on an MRM adapter, and an adapter application development tool is proposed to support developing the application. Using the tool, developers can easily implement data resolution conversion component plugged-in HLA adapter. A case study is implemented in the proposed MRM system, and shows that models of different resolution works successfully with dynamic resolution changes.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.23 no.60
• /
• pp.11-22
• /
• 2000

The main objective of this research is to analyze an order point and an order quantity of a distribution center and each branch to attain a target service level in multi-level inventory distribution system. In case of product item, we use the item with low volume of average monthly demand. Under the continuous review method, the distribution center places a particular order quantity to an outside supplier whenever the level of inventory reaches an order point, and receives the order quantity after elapsing a certain lead time. Also, each branch places an order quantity to the distribution center whenever the level of inventory reaches an order point, and receives the quantity after elapsing a particular lead time. When an out of stock condition occurs, we assume that the item is backordered. For considering more realistic situations, we use generic type of probability distribution of lead times. In the variable lead time model, the actually achieved service level is estimated as the expected service level. Therefore, this study focuses on the analysis of deciding the optimal order point and order quantity to achieve a target service level at each depot as a expected service level, while the system-wide inventory level is minimized. In addition, we analyze the order level as a maximum level of inventory to suggest more efficient way to develop the low demand item model.