• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.5
• /
• pp.582-589
• /
• 2016

Multi-mode monopulse system is widely used for satellite terminal like UAV because of high tracking accuracy and low size/weight profile. In order to calculate tracking error, Multi-mode monopulse system utilizes high-order mode signal, and it should have enough C/N(carrier to noise) level therefore tracking system needs narrow band filtering of received satellite beacon signal as much as possible. However, UAV suffers for beacon frequency drift derived from Doppler effect due to satellite figure 8 movement and UAV maneuvering. Therefore wideband signal processing needs to be considered in advance for exact doppler compensation and consequent time delay. In this paper, we propose the multi-stage Digital Signal processing system for beacon signal, which could minimize the signal delay under high Doppler and low C/N condition.

• 제어로봇시스템학회:학술대회논문집
• /
• 2001.10a
• /
• pp.121.3-121
• /
• 2001

The movement of a ship is important for DBS(Direct Broadcasting Satellite) Receiving Antenna control algorithm design on shipboard. Especially, turning of ship is essential factor to affect the angle change of azimuth and elevation. Therefore, to track the satellite stably, we need the tracking method considering turning rate of ship. In this paper, we propose an effective satellite tracking algorithm for DBS receiving antenna on shipboard. In the proposed method, when a ship is turned, it selects one of the Multi tracking modes - Normal mode, Low speed mode, Middle speed mode and High speed mode - according as turning rate to be calculated by using Gyro sensor.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.31A no.5
• /
• pp.76-84
• /
• 1994

Recently, Optical BJTC as a new approach for real-time multi-target tracking has been intensively studied. But the conventional system has some problems in the practical applications such as the false alarm and target missing and low correlation efficiency, and these poor performances are analyzed to be deeply dependent on the binarization method. So, in this paper, a new BJTC system which has the improved performances in target discrimination and diffraction efficiency is suggested, which is based on the JTPS having the same properties with those of the matched filter and new power spectrum binarization method to use effectively the high frequency components of the JTPS signal. Through the computer simulation and some experiments, the performances of the new BJTC tracking system are analyzed and proved to be superior to those of the conventional system baseds on Median method in multi- target tracking problems.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.03a
• /
• pp.334-336
• /
• 2008

A novel adaptive mesh refinement (AMR) strategy based on the Moment-of-Fluid (MOF) method for volume-tracking dynamic interface computation is presented. The Moment-of-Fluid method is a new interface reconstruction and volume advection method using volume fraction as well as material centroid. The mesh refinement is performed based on the error indicator, the deviation of the actual centroid obtained by interface reconstruction from the reference centroid given by moment advection process. Using the AMR-MOF method, the accuracy of volume-tracking computation with evolving interfaces is improved significantly compared to other published results.

• 한국전산유체공학회:학술대회논문집
• /
• 2008.10a
• /
• pp.334-336
• /
• 2008

A novel adaptive mesh refinement (AMR) strategy based on the Moment-of-Fluid (MOF) method for volume-tracking dynamic interface computation is presented. The Moment-of-Fluid method is a new interface reconstruction and volume advection method using volume fraction as well as material centroid. The mesh refinement is performed based on the error indicator, the deviation of the actual centroid obtained by interface reconstruction from the reference centroid given by moment advection process. Using the AMR-MOF method, the accuracy of volume-tracking computation with evolving interfaces is improved significantly compared to other published results.

• Proceedings of the KSME Conference
• /
• 2008.11a
• /
• pp.795-800
• /
• 2008

The paper presents research for the established experiment environment of multi vehicle robot, localization algorithm that is based on vehicle control, and path tracking. The established experiment environment consists of ultrasonic positioning system, vehicle robot, server and wireless module. Ultrasonic positioning system measures positioning for using ultrasonic sensor and generates many errors because of the influence of environment such as a reflection of wall. For a solution of this fact, localization algorithm is proposed to determine a location using vehicle kinematics and selection of a reliable location data. And path tracking algorithm is proposed to apply localization algorithm and LOS, finally, that algorithms are verified via simulation and experimental

• Journal of computational fluids engineering
• /
• v.14 no.1
• /
• pp.18-23
• /
• 2009

A novel adaptive mesh refinement(AMR) strategy based on the Moment-of-Fluid(MOF) method for volume-tracking dynamic interface computation is presented. The Moment-of-Fluid method is a new interface reconstruction and volume advection method using volume fraction as well as material centroid. The adaptive mesh refinement is performed based on the error indicator, the deviation of the actual centroid obtained by interface reconstruction from the reference centroids given by moment advection process. Using the AMR-MOF method, the accuracy of volume-tracking computation with evolving interfaces is improved significantly compared to other published results.

• ETRI Journal
• /
• v.28 no.3
• /
• pp.367-370
• /
• 2006

This letter presents a multi-modal approach to tracking geographic objects such as buildings and road signs in a video sequence recorded from a moving vehicle. In the proposed approach, photogrammetric techniques are successfully combined with conventional tracking methods. More specifically, photogrammetry combined with positioning technologies is used to obtain 3-D coordinates of chosen geographic objects, providing a search area for conventional feature trackers. In addition, we present an adaptive window decision scheme based on the distance between chosen objects and a moving vehicle. Experimental results are provided to show the robustness of the proposed approach.

• Geophysics and Geophysical Exploration
• /
• v.2 no.3
• /
• pp.154-158
• /
• 1999

This paper introduces a partial edge detection technique, that improves the processing time of an automatic change tracking system for multi-temporal images. In the conventional change tracking systems for multi-temporal images, the edge detection is performed over the whole image. In the proposed method, however, the necessary portions for the edge detection is selected first and the edge detection is performed over the selected parts only. As a consequence, the improvement in the processing time could be achieved. The proposed change tracking system is expected to be utilized as a very efficient tool to configure changes in large data set such as remotely sensed satellite imagery or geophysical time laps images.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2016.10a
• /
• pp.700-702
• /
• 2016

The Doppler Radar that mounted on Electro Optical Tracking System has been operated to measure range and velocity during the initial mission of space launch vehicle at Naro space center. In this paper, we mentioned configuration of MFCW(Multi frequency Continuous Wave) and FMCW(Frequency Modulation Continuous Wave) Doppler Radar on Electro Optical Tracking System and described method of range measurement.