• 대한전자공학회논문지
• /
• 제23권6호
• /
• pp.888-894
• /
• 1986

In this paper, a phase locked loop control system is designed to have high performance and stability in a 2-phase bifilar winding PM step motor. The BODE diagram analysis method is used to improve the stability and dynamic characteristic of the closed loop control system. Also, a PLL servo is used to accomplish high-precision speed and to attain smooth ness. In applying the PLL control to the step motor, a new design method is suggested to solve the control problem which occurs as a result of the limited maximum acceleration of the step motor. A simple design method is suggested without using the complicated multi-step characteirstic of the step motor in constant voltage driving. Computer simulation results agree clorelg with experiments, indicating that the PLL servo system of the step motor designed is very useful.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2004년도 학술대회 논문집 정보 및 제어부문
• /
• pp.644-646
• /
• 2004

The closed loop identification(CLID) is a very useful method for on-line applications since it can identify the plant in the closed-loop system composed of the plant and the controller. There are some literatures on CLID, but they and mainly focused on SISO(Single-Input/Single-Output) problem. In this paper, a CLID method is proposed for MIMO(Multi-Input/Multi-Output) systems. The CLID method is applied to a MIMO benchmark plant, TRMS(Twin-Rotor MIMO System). To illustrate the performance of the closed-loop system identification., unit step responses in the TRMS are represented and compared with the open-loop identification via some simulation.

• 한국통신학회논문지
• /
• 제30권11A호
• /
• pp.1021-1026
• /
• 2005

본 논문에서는 시변 페이딩 채별에 적합한 멀터스텝 LS 선형예측기를 갖는 새로운 예측 CDMA 폐루프 전력 제어 방식을 제안한다. 제안된 방식은 다중 전력 제어 그룹 지연을 효과적으로 보상하여 주며 단일 스텝 예측기를 갖는 기존의 예측 CLPC 방식이나 비예측 CLPC 방식에 비하여 우수한 성능 이득을 갖는다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1996년도 춘계학술대회 논문집
• /
• pp.456-460
• /
• 1996

A nonlinear control scheme for preventing limit cycle due to the nonlinearity of themulti-step bang-bang actuator in mechanical position control systems is proposed. A linearized model, SIDF, fora multi-step bang-bang actuator is introduced to compensate the nonlinearity of the multi-step bang-bang actuator. Using that model, a $H_{\infty}$robust controller for position control systms with a bang-bang actuator is proposed by loop shaping tecniques with normalized coprime factorization stabilization to address the robustness. The proposed scheme needs a smaller deadband as a result of compensating the nonlinearity of the bang-bang actuator. A single-axis servo system is served in order to verify the proposed control scheme experimentally. Experimental results show that the controller can satisfy the special intersts, silent contact switching of the actuator.r.

• 조명전기설비학회논문지
• /
• 제18권6호
• /
• pp.128-135
• /
• 2004

본 논문은 자기부상열차용 전원의 문제점을 개선시키기 위해서 다중루프 제어기를 제시하였다. 제시된 제어기는 3개의 부분으로 구성되어 있다. 첫 번째는 입력전압의 변동에 대하여 보상할 수 있는 Feed Forward제어기이며 두 번째는 리액터 전류와 출력 전류의 차를 보상하며, 세 번째는 비례적분제어기를 사용하여 출력전압에 포함된 리플을 감소시키므로써, 안정화된 시스템을 구현하였다. 이 시스템의 특성을 확인하기 위해서 Matlab Simulink와 고성능 DSP소자인 TMS320F240을 이용하여 비교 분석하였다.

• 한국초전도학회:학술대회논문집
• /
• 한국초전도학회 2003년도 High Temperature Superconductivity Vol.XIII
• /
• pp.58-58
• /
• 2003

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1996년도 한국자동제어학술회의논문집(국내학술편); 포항공과대학교, 포항; 24-26 Oct. 1996
• /
• pp.1120-1123
• /
• 1996

DMC(Dynamic Matrix Control) algorithm has been successfully used in industries for more than a decade. It can handle constraints and easily extended to MIMO case. The application of DMC, however, is limited to the open loop stable process because it uses the FIR(Finite Impulse Response) or FSR(Finite Step Response) model. Integrating process widely used in chemical process industry, is the representative open loop unstable process. The disturbance rejection of DMC is relatively poor due to the assumption that the current disturbance is equivalent to the future disturbance. We propose the IDMC(Improved Dynamic Matrix Control) for the integrating process, as well as non-integrating process. IDMC has shown better disturbance rejection using multi-step ahead predictor for the disturbance.

• 제어로봇시스템학회논문지
• /
• 제18권11호
• /
• pp.1051-1058
• /
• 2012

The unified lateral control algorithm for automatic valet parking for various types of vehicles is presented and its feasibility is shown experimentally via field tests for the given parking scenario. First, a trajectory generation algorithm for forward driving and backward multi-step parking maneuvers is developed. Then, with consideration of different types of vehicles and operating conditions, a kinematic vehicle model is used and validated using field test data. Using the nonlinear vehicle model, the lateral controller is designed based on dynamic surface control. Finally the proposed lateral control law is validated via hardware-in-the-loop simulations for different types of vehicles and experimentally using a test vehicle through field tests.

• 인터넷정보학회논문지
• /
• 제11권4호
• /
• pp.59-72
• /
• 2010

WIM(Weigh-In-Motion) 시스템은 고속으로 이동 중인 차량의 무게를 측정하는 시스템이다. 기존의 WIM 시스템에서는 등속을 기준으로 차량의 무게를 측정하며 오차율이 10% 범위에 있다. 하지만 운전자의 가 감속 조작과 같은 비정상 주행패턴을 고려하고 있지 않으므로 실제 오차율은 더욱 크다. 이러한 오차를 최소화하기 위해서 비정상적인 주행패턴을 찾고 이를 적용한 개선된 WIM 시스템이 필요하다. 본 논문에서는 기존의 WIM 시스템의 오차율에 영향을 미치는 비정상 주행패턴을 분석하고 오차율을 최소화하는 개선된 WIM 시스템을 설계한다. 개선된 WIM 시스템은 기존의 시스템에 루프센서를 추가한 다단 루프 구조를 가진다. 또한 내부적으로 정의된 측정 함수를 개선하여 비정상 주행패턴별로 측정된 무게를 보정한다. 실험 분석 결과 개선된 WIM 시스템은 기존의 최대 평균 오차율 22.98% 에서 8% 미만으로 오차율이 감소한 사실을 알 수 있다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2000년도 추계학술대회 논문집
• /
• pp.1006-1009
• /
• 2000

In this study, a multi-step optimization technique combined with a simple genetic algorithm is introduced in order to minimize the static compliance, the dynamic compliance, and the weight of a high speed machining center simultaneously. Dimensional thicknesses of the eight structural members on the static force loop are adopted as design variables. The first optimization step is a static design optimization, in which the static compliance and the weight are minimized under some dimensional and safety constraints. The second step is a dynamic design optimization, where the dynamic compliance and the weight are minimized under the same constraints. After optimization, the weight of the moving body only was reduced to 57.75% and the weight of the whole machining center was reduced to 46.2% of the initial design respectively. Both static and dynamic compliances of the optimum design are also in the feasible range even though they were slightly increased than before.