• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2000년도 유체기계 연구개발 발표회 논문집
• /
• pp.65-74
• /
• 2000

A five path ultrasonic and/or magnetic flowmeter were installed after valve. Five path ultrasonic flowmeter were tested to obtain it's performance in a water flow standard system and magnetic flowmeter. It's varied with straight pipe length(nD), install direction and valve position. All the results are summerized. The multi-path flowmeters(MUF) showed up to $\pm0.5{\%}$ at a 2, 4, 8, 15D spacing : the MUF was significantly better than magnetic flowmeter at disturbed flow conditions.

• 제어로봇시스템학회논문지
• /
• 제18권5호
• /
• pp.413-418
• /
• 2012

This paper presents a multi-robot path planner for environment exploration and monitoring. Robotics systems are being widely used as data measurement tools, especially in dangerous environment. For large scale environment monitoring, multiple robots are required in order to save time. The path planner should not only consider the collision avoidance but efficient coordination of robots for optimal measurements. Nonlinear spring force based planning algorithm is integrated with the spatial gradient following path planner. Perturbation/Correlation based estimation of spatial gradient is applied. An algorithm of tuning the stiffness for robot coordination is presented. The performance of the proposed algorithm is discussed with simulation results.

• 융합보안논문지
• /
• 제13권6호
• /
• pp.77-82
• /
• 2013

최근 네트워크 사용자의 가치 변화와 이용 패턴을 살펴보면, 단순 웹 정보, 단방향 정보습득의 일방적인 데이터 전달에서, 멀티미디어 활용의 증가, 보안 및 개인화의 요구 증대, 자유로운 이동성에 대한 욕구 증가 등의 변화가 생기고 있다. 이러한 욕구의 변화로 인해 개별적으로 제공되는 각각의 서비스는 점차 융합화된 형태의 통합 서비스로 발전하고, 네트워크 또한 각각의 서비스를 위한 개별 망에서 이용자의 다양한 통합 욕구를 실현시켜 주는 지능형 통합망의 형태로 발전할 것으로 전망되며, 관련한 기술의 핵심이 되는 통신망 제어기술 또한 급속히 발전하고 있다. 본 논문에서는 자원의 효율적 사용은 물론 다중 도메인 (multi-domain)환경에서 다계층 (multi-layer)간의 정보 전달을 최소화하고, 최적의 경로선택을 할 수 있는 방법을 제안하였다. 기존의 경로선택에서 각각의 계층에 대한 정보를 이용하여 경로를 선택한 것에 비하여 다계층 구조상에서 다 계층의 정보를 활용하여 경로선택에 대한 다각화를 통한 최적의 경로선택이 수행되도록 제안하였다.

• International Journal of Computer Science & Network Security
• /
• 제23권7호
• /
• pp.1-8
• /
• 2023

An Orthogonal Frequency Division Multiplexing (OFDM) based wireless communication system has drawn wide attention for its high transmission rate and high spectrum efficiency in not only radio but also Underwater Acoustic (UWA) applications. Because of the narrow sub-carrier spacing of OFDM, orthogonality between sub-carriers is easily affected by Doppler effect caused by the movement of transmitter or receiver. Previously, Doppler compensation signal processing algorithm for Desired propagation path was proposed. However, other Doppler shifts caused by delayed Undesired signal arriving from different directions cannot be perfectly compensated. Then Receiver Bit Error Rate (BER) is degraded by Inter-Carrier-Interference (ICI) caused in the case of Multi-path Doppler channel. To mitigate the ICI effect, a modified Delay and Doppler Profiler (mDDP), which estimates not only attenuation, relative delay and Doppler shift but also sampling clock shift of each multi-path component, is proposed. Based on the outputs of mDDP, an ICI canceling multi-tap equalizer is also proposed. Computer simulated performances of one-tap equalizer with the conventional Time domain linear interpolated Channel Transfer Function (CTF) estimator, multi-tap equalizer based on mDDP are compared. According to the simulation results, BER improvement has been observed. Especially, in the condition of 16QAM modulation, transmitting vessel speed of 6m/s, two-path multipath channel with direct path and ocean surface reflection path; more than one order of magnitude BER reduction has been observed at CNR=30dB.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2001년도 하계학술대회 논문집 D
• /
• pp.2417-2419
• /
• 2001

A path planning is one of the main subjects in a mobile robot. It is divided into two parts. One is a global path planning and another is a local path planning. This paper, using the formal two methods, presents that the mobile robot moves to multi-targets with avoiding unknown obstacles. For the shortest time and the lowest cost, the mobile robot has to find a optimal path between targets. To find a optimal global path, we used GA(Genetic Algorithm) that has advantage of optimization. After finding the global path, the mobile robot has to move toward targets without a collision. FLC(Fuzzy Logic Controller) is used for local path planning. FLC decides where and how faster the mobile robot moves. The validity of the study that searches the shortest global path using GA in multi targets and moves to targets without a collision using FLC, is verified by simulations.

• Nuclear Engineering and Technology
• /
• 제55권5호
• /
• pp.1838-1854
• /
• 2023

This paper presents a hybrid algorithm to solve the multi-objective path planning (MOPP) problem for mobile robots in a static nuclear accident environment. The proposed algorithm mimics a real nuclear accident site by modeling the environment with a two-layer cost grid map based on geometric modeling and Monte Carlo calculations. The proposed algorithm consists of two steps. The first step optimizes a path by the hybridization of improved ant colony optimization algorithm-modified A^* (IACO-A^*) that minimizes path length, cumulative radiation dose and energy consumption. The second module is the high radiation dose rate avoidance strategy integrated with the IACO-A^* algorithm, which will work when the mobile robots sense the lethal radiation dose rate, avoiding radioactive sources with high dose levels. Simulations have been performed under environments of different complexity to evaluate the efficiency of the proposed algorithm, and the results show that IACO-A^* has better path quality than ACO and IACO. In addition, a study comparing the proposed IACO-A^* algorithm and recent path planning (PP) methods in three scenarios has been performed. The simulation results show that the proposed IACO-A^* IACO-A^* algorithm is obviously superior in terms of stability and minimization the total cost of MOPP.

• 정보과학회 논문지
• /
• 제41권12호
• /
• pp.1145-1151
• /
• 2014

본 논문에서는 전술 백본망에서 부하 분산을 위한 다중 경로 지역 최적화 기법을 제안하였다. 제안된 기법은 라우팅 메트릭을 전역 메트릭과 지역 메트릭으로 구분하여 관리한다. 전역 메트릭은 라우팅 프로토콜을 통해 다른 라우터들에게 전파되며 루프 방지가 보장되는 다중 경로 구성에 사용되고, 지역 메트릭은 링크 사용율을 반영하여 링크 과부하 발생시 우회 경로를 탐색하는 용도로 활용되며 각 라우터 내에서만 관리된다. 모의 실험을 통해 다중 경로 지역 최적화 기법 적용시 사용자 트래픽이 효과적으로 가용 링크들을 통해 분산되는 것을 확인하였다.

• 한국컴퓨터정보학회논문지
• /
• 제22권12호
• /
• pp.49-54
• /
• 2017

Pathfinding for pedestrians provided by various navigation programs is based on a shortest path search algorithm. There is no big difference in their guide results, which makes the path quality more important. Multiple criteria should be included in the search cost to calculate the path quality, which is called a multi-criteria pathfinding. In this paper we propose a user adaptive pathfinding algorithm in which the cost function for a multi-criteria pathfinding is defined as a weighted sum of multiple criteria and the weights are learned automatically by Perceptron learning. Weight learning is implemented in two ways: short-term weight learning that reflects weight changes in real time as the user moves and long-term weight learning that updates the weights by the average value of the entire path after completing the movement. We use the weight update method with momentum for long-term weight learning, so that learning speed is improved and the learned weight can be stabilized. The proposed method is implemented as an app and is applied to various movement situations. The results show that customized pathfinding based on user preference can be obtained.

• 소성∙가공
• /
• 제32권4호
• /
• pp.208-214
• /
• 2023

This paper discusses the deformation characteristics of a scaled-down automotive outer door panel with vacuum-assisted incremental sheet forming. The vacuum condition between the die and Al6052-H32 sheet with a thickness of 1.0 mm is reviewed with the goal of improving the geometrical accuracy of the target product. The material flow according to the forming tool path, including the multi-tool path and conventional contour tool path, is investigated considering the degradation of the pillow effect. To reduce friction between the tool and the sheet during incremental forming, automotive engine oil (5W-30) is used as a lubricant, and the strain field on the surface of the formed product is analyzed using ARGUS. By comparing the geometry and material flow characteristics of products under different test conditions, it is confirmed that the product surface quality can be significantly improved when the vacuum condition is employed in conjunction with a multi-tool path strategy.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2000년도 춘계학술대회논문집 - 한국공작기계학회
• /
• pp.647-652
• /
• 2000

Recently, according to the various taste of consumers, the design of a product is changed variously and complicatedly. The complicated product is not usually constructed with one patch but multi-patch. By the way, in machining, higher precision and the reduction of leading and machining time is required. But for the multi-patch sculptured surface, the amount of machining data becomes large. This means the increase of leading and machining time. In this study, the tool path generation method with reparameterization is proposed for multi-patch sculptured surface and variable step size using NURBS is used to satisfy the precision and to reduce leading and machining time.