• Journal of Computing Science and Engineering
• /
• v.11 no.2
• /
• pp.49-57
• /
• 2017

This paper proposes a new IPv6 networking paradigm as a counter answer to the rationale for locator/identifier separation. Instead of involving separate number spaces each for node identifiers and locators, the context of the IP address as a node identifier alone is utilized and no additional locators are incorporated. That is, there are only node addresses and no locators, and location information is indirectly derived from neighbor relations between nodes. In order to accomplish this, no subnet IDs are utilized; the ID value is set to zero for all subnets. The paper details how to construct this paradigm through novel choice of operational policies in various IPv6 protocols and some trivial modifications. Especially, inherent provision of intra-domain node- as well as subnet-mobility by use of standard link-state intra-domain routing protocols is discussed. A number of important advantages of this paradigm over the canonical IPv6 networking and various known solutions of locator/identifier separation are discussed. Tailoring for multi-area domains and IPv4 is left for further study.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.19 no.6
• /
• pp.762-768
• /
• 2016

In this paper, a method for generating ranging signal to reduce the effects of interference and overcome intentional jamming is proposed in slow frequency hopping(SFH) communication system. A terminal uses ranging signal for initial Up-link synchronization in the frequency hopping communication systems using multi-terminal. However, ranging signal generated by unsynchronized terminal acts as an interference signal to another terminal. Therefore, we propose the design of the ranging signal with PN sequence in order to minimize the affection to the other terminal and simulated its performance. From the simulated result, we confirm synchronization performance.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.21 no.5
• /
• pp.640-648
• /
• 2018

Time division wireless communication in tactical MANET is attractive to deliver both high data rates and long-range coverage, and to provide scheduled QoS to mission participants. This paper is about the time synchronization issue of multi-mission USV in tactical MANET. As USV communication coverage becomes longer, the synchronization error also becomes higher; therefore, which results in link disconnection, and consequent failures of reconnection because base station cannot configure necessary parameters over long-distant terminal. We propose a range adaptive time synchronization method to compensate for synchronization errors. The issue of long-range time synchronization problem was identified during maritime communication tests, and we verified the proposed method through analyses of both indoor and outdoor test results.

• Journal of Sensor Science and Technology
• /
• v.18 no.1
• /
• pp.63-71
• /
• 2009

It is said that the desirable bio-signal measurement and stimulation system should be an implantable type if the several problems such as biocompatibility, electrical safety, and so on are overcome. In addition to the biocompatibility issue, a robust RF communication and a stable electrical power source for the implantable bio-signal measurement and stimulation system are very important matters. In this paper, a wireless telemetry system which adopts the FCC's approved MICS (medical implant communication service) protocol and a wireless power transmission has been proposed. The proposed system composed of a base station (BS) and an implantable medical device (IMD) has the advantages that the interference with other RF devices can be reduced by the use of the specially assigned MICS frequency band of 402.MHz to 405 MHz. Also, the proposed system includes various functions of a multi-channel bio-signal acquisition and an electric stimulation. Since the electrical power for the IMD can be provided by the inductive link between PCB patterned coils, the IMD needs no battery so that the IMD can be smaller size and much less dangerous than the active type IMD which includes the internal battery. Finally, the validity as a wireless telemetry system has been demonstrated through the experiments by using the implemented BS and IMD.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.14 no.1
• /
• pp.20-39
• /
• 2020

This paper considers a downlink multi-carrier cooperative non-orthogonal multiple access (NOMA) transmission, where no direct link exists between the far user and the base station (BS), and the communication between them only relies on the assist of the near user. Firstly, the BS sends a superimposed signal of the far and the near user to the near user, and then the near user adopts simultaneous wireless information and power transfer (SWIPT) to split the received superimposed signal into two portions for energy harvesting and information decoding respectively. Afterwards, the near user forwards the signal of the far user by utilizing the harvested energy. A minimum data is required to ensure the quality of service (QoS) of the far user. We jointly optimize power allocation, subcarrier allocation, time allocation, the power allocation (PA) coefficient and the power splitting (PS) ratio to maximize the number of data bits received at the near user under the energy causality constraint, the minimum data constraint and the transmission power constraint. The block-coordinate descent method and the Lagrange duality method are used to obtain a suboptimal solution of this optimization problem. In the final simulation results, the superiority of the proposed NOMA scheme is confirmed compared with the benchmark NOMA schemes and the orthogonal multiple access (OMA) scheme.

• The KIPS Transactions:PartA
• /
• v.11A no.7 s.91
• /
• pp.511-520
• /
• 2004

A peer-to-peer model is very useful in solving the server link bottleneck problem of a client-server model. In this work, we discuss the problems of distributing multimedia content over peer-to-peer network. We focus on two problems in peer-to-peer media content distribution systems. The first is the transmission scheduling of the media data for a multi-source streaming session. We present a sophisticated scheduling scheme called fixed-length slotted scheduling, which results in minimum buffering delay. The second problem is on the fast distribution of media content in the peer-to-peer system that is self-growing. We propose a mechanism accelerating the speed at which the system's streaming ca-pacity increases, called FAST.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.7 no.4
• /
• pp.667-672
• /
• 2003

Smart antennas will be used mon widely for the higher data rate and the larger number of users as the demand of wireless multimedia service is increased. Therefore, the BER performance is analyzed in this paper for DS-CDMA and MC-CDMA systems using smart antennas. A reverse link channel is simulated assuming the frequency selective Rayleigh fading. The simulation results are presented based on the characteristics of DS-CDMA and MC-CDMA systems according to the signal spectrum bandwidth and the method of adaptive beamforming. The BER performances of both systems are improved as the beam width of smart antennas is decreased. Also, it is shown that the performance of MC-CDMA system is much better than that of DS-CDMA system as the number of users is increased.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.4B
• /
• pp.224-231
• /
• 2008

EPONs are a low cost, high speed solution to the bottleneck problem of broadband access networks. To support point-to-point and shared LAN emulation, EPONs use the multi-point control protocol (MPCP), which uses logical link identification (LLID) for frame tagging and filtering between the OLT and ONUs. In this paper, ONU-based multicast or multiple shared LAN emulation is used for IPTV channel package delivery services. Using ONU-based VLAN services, EPONs can support separate and secure connections between providers and subscribers in a simple manner. Also, IPTV channel packages can be delivered through EPONs by implementing ONU-based VLAN and IGMP snooping mechanisms. By showing fast channel zapping time of proposed architecture, I show that EPONs is suitable for IPTV channel package delivery service.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.939-944
• /
• 2007

Generally, development of a robot capable of fast movements or high payloads is progressed by the analysis of dynamic characteristics, DOF positioning, actuator selection, structure of links, and so on. This paper highlights the design of a robot manipulator handled by a human for man-machine cooperation. The requirements of the proposed system include its having multi-DOF(Degree of Freedom)and the capacity for a high payload in the condition of its maximum reach. The primary investigation factors are motion range, performance within the motion area, and reliabilityduring the handling of heavy materials. Traditionally, the mechanical design of robots has been viewed as a problem of packaging motors and electronics into a reasonable structure. This process usually transpires with heavy reliance of designerexperience. Not surprisingly, the traditional design process contains no formally defined rules for achieving desirable results, as there is little opportunity for quantitative feedback during the formative stages. This work primarily focuses on the selection of proper joint types and link lengths, considering a specific task type and motion requirements of the heavy material handling.

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 1994.04a
• /
• pp.561-568
• /
• 1994

A man model can be used as an effective tool to design ergonomically sound products and workplaces, and subsequently evaluate them properly. For a man model to be truly useful, it must be integrated with a posture prediction model which should be capable of representing the human arm reach posture in the context of equipments and workspaces. Since the human movement possesses redundant degrees of freedom, accurate representation or prediction of human movement was known to be a difficult problem. To solve this redundancy problem, a psychophysical cost function was suggested in this study which defines a cost value for each joint movement angle. The psychophysical cost function developed integrates the psychophysical discomfort of joints and the joint range availability concept which has been used for redundant arm manipulation in robotics to predict the arm reach posture. To properly predict an arm reach posture, an arm reach posture prediction model was then developed in which a posture configuration that provides the minimum total cost is chosen. The predictivity of the psychophysical cost function was compared with that of the biomechanical cost function which is based on the minimization of joint torque. Here, the human body is regarded as a two-dimensional multi-link system which consists of four links ; trunk, upper arm, lower arm and hand. Real reach postures were photographed from the subjects and were compared to the postures predicted by the model. Results showed that the postures predicted by the psychophysical cost function closely simulated human reach postures and the predictivity was more accurate than that by the biomechanical cost function.