• Journal of the Korea Society of Computer and Information
• /
• v.17 no.12
• /
• pp.137-148
• /
• 2012

In this paper, we proposed the location-aware coordinate routing algorithm for improving the performance of routing algorithm by using ZigBee in Smart Grid environment. A distributed address allocation scheme used an existing algorithm that has wasted in address space. The x, y and z coordinate axes from divided address space of 16 bit to solve this problems. However, coordinate routing does not take account of wireless link condition. If wiress link condition is not considered, when the routing table is updated, the nodes with bad link conditions are updated in the routing table and can be chosen as the next hop. This brings out the retransmissions because of received packet's errors. Also, because of these retransmissions, additional power is consumed. In this paper, we propose the location-aware coordinate routing algorithm considering wiress link condition, where reliable data transmission is made and the consumed enegy is minimize. and we compared and connected region and transition region of ZigBee location based routing in the aspect of average number of multi hops, subordinate packet delivery ratio, delay time, and energy consumption of proposed algorithm. It turned out that there were improvements in performances of each items.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.5 no.2
• /
• pp.247-268
• /
• 2011

Due to the application-specific nature of wireless sensor networks, the sensitivity to such a requirement as data reporting interval varies according to the type of application. Such considerations require an application-specific, parameter tuning paradigm allowing us to maximize energy conservation prolonging the operational network lifetime. In this paper, we propose a reporting interval adaptive, sensor control platform for energy-saving data gathering in wireless sensor networks. The ultimate goal is to extend the network lifetime by providing sensors with high adaptability to application-dependent or time-varying, reporting interval requirements. The proposed sensor control platform is based upon a two phase clustering (TPC) scheme which constructs two types of links within each cluster - namely, direct link and relay link. The direct links are used for control and time-critical, sensed data forwarding while the relay links are used only for multi-hop data reporting. Sensors opportunistically use the energy-saving relay link depending on the user reporting, interval constraint. We present factors that should be considered in deciding the total number of relay links and how sensors are scheduled for sensed data forwarding within a cluster for a given reporting interval and link quality. Simulation and implementation studies demonstrate that the proposed sensor control platform can help individual sensors save a significant amount of energy in reporting data, particularly in dense sensor networks. Such saving can be realized by the adaptability of the sensor to the reporting interval requirements.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.9
• /
• pp.3138-3151
• /
• 2022

Traffic safety and congestion are becoming more and more serious, especially the frequent occurrence of traffic accidents, which have caused great casualties and economic losses. Cellular Vehicle to Everything (C-V2X) can assist in safe driving and improve traffic efficiency through real-time information sharing and communication between vehicles. All vehicles communicate directly with Base Stations (BS), which will increase the base station load. And when the communicating vehicles are too far apart, too fast or there are obstacles in the communication path, the communication link can be unstable or even interrupted. Therefore, choosing an effective and reliable multi-hop relay-assisted Vehicle to Vehicle (V2V) communication can not only reduce the base station load and improve the system throughput but also expand the base station coverage and improve the communication quality of edge vehicles. Therefore, a communication area division scheme based on regular hexagon segmentation technology is proposed, a relay-assisted V2V communication mechanism is designed for the divided communication areas, and an efficient communication link is constructed by selecting the best relay node. Simulation results show that the scheme can improve the throughput of the system by nearly 55% and enhance the robustness of the V2V communication link.

• Journal of KIISE
• /
• v.41 no.12
• /
• pp.1145-1151
• /
• 2014

In this paper, we propose MPLO(Multi-Path routing with Local Optimization) for load balancing in the tactical backbone network. The MPLO manages global metric and local metric separately. The global metric is propagated to other routers via a routing protocol and is used for configuring loop-free multi-path. The local metric reflecting link utilization is used to find an alternate path when congestion occurs. We verified MPLO could effectively distribute user traffic among available routers by simulation.

• The Journal of the Acoustical Society of Korea
• /
• v.21 no.3
• /
• pp.230-236
• /
• 2002

A study on architecture of new parallel interference canceller which can be applied for reverse link of next generation mobile communication system supporting multi-rate is performed on this paper. The proposed method adopts new algorithm which can be applied for multi-rate system to reduce multiple access interference (MAI) which cause performance degradation of CDMA system and limit of channel capacity. The proposed system is evaluated by simulation results under various conditions. As a result, performance enhancement is achieved compared to existing conventional interference cancellers. Although the amount of calculation is increased, we can find that the performance is improved generally.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.10B
• /
• pp.872-882
• /
• 2006

The Wireless Mesh Network uses a wireless communication technology with transmission rates similar to that of a cable, which is used as a backbone network. The topology structure is in a Mesh form which resembles an Ad-hoc network, however a metric is needed in order to set the channel and channel methods since the operation intentions and interior motions are different. This thesis proposes a metric(ETR : Expected Transmission Rate) that sets the channel with physical link performance and multi hop transmission capabilities. This metric will also be based on multi channel creation methods and Hop-by-hop routing techniques for an effective multi hop transmission with no loops.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.6 no.2
• /
• pp.629-648
• /
• 2012

Given a video stream delivering system deployed on a multicast tree, which is embedded in a multi-channel multi-radio wireless mesh network, our problem is concerned about how to allocate interference-free channels to tree links and maximize the number of serviced mesh clients at the same time. In this paper, we propose a channel allocation heuristic algorithm based on best-first search and backtracking techniques. The experimental results show that our BFB based CA algorithm outperforms previous methods such as DFS and BFS based CA methods. This superiority is due to the backtracking technique used in BFB approach. It allows previous channel-allocated links to have feasibility to select the other eligible channels when no conflict-free channel can be found for the current link during the CA process. In addition to that, we also propose a tree refinement method to enhance the quality of channel-allocated trees by adding uncovered destinations at the cost of deletion of some covered destinations. Our aim of this refinement is to increase the number of serviced mesh clients. According to our simulation results, it is proved to be an effective method for improving multicast trees produced by BFB, BFS and DFS CA algorithms.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.15 no.6
• /
• pp.770-778
• /
• 2012

In this paper, we propose a multi-path construction scheme to improve the survivability of a multicast session in military hybrid networks. A military hybrid network consists of a static backbone network and multiple mobile stub networks where some nodes are frequently susceptible to be disconnected due to link failure and node mobility. To improve the survivability of multicast sessions, we propose a construction scheme of ${\kappa}$ redundant multi-paths to each receiver. In order to take account of different characteristics of static and mobile networks, we propose quite different multi-path setup approaches for the backbone and stub networks, respectively, and combine them at the boundary point called gateway. We prove that our proposed scheme ensures that each receiver of a multicast session has ${\kappa}$ redundant paths to the common source. Through simulations, we evaluate the performance of the proposed schemes from three aspects : network survivability, recovery cost, and end-to-end delay.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.5
• /
• pp.1973-1991
• /
• 2018

Multimedia applications over wireless networks have been evolving to augmented reality or virtual reality services. However, a rich data size compared to conventional multimedia services causes bandwidth bottlenecks over wireless networks, which is one of the main reasons why those applications are not used widely. To overcome this limitation, bandwidth aggregation techniques, which exploit a multi-path transmission, have been considered to maximize link utilization. Currently, most of the conventional researches have been focusing on the user end problems to improve the quality of service (QoS) through optimal load distribution. In this paper, we address the joint pricing and load distribution problem for multi-homing in heterogeneous wireless access networks (ANs), considering the interests of both the users and the service providers. Specifically, we consider profit from resource allocation and cost of power consumption expenditure for operation as an utility of each service provider. Here, users decide how much to request the resource and how to split the resource over heterogeneous wireless ANs to minimize their cost while supporting the required QoS. Then, service providers compete with each other by setting the price to maximize their utilities over user reactions. We study the behaviors of users and service providers by analyzing their hierarchical decision-making process as a multileader-, multifollower Stackelberg game. We show that both the user and service provider strategies are closed form solutions. Finally, we discuss how the proposed scheme is well converged to equilibrium points.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.10a
• /
• pp.465-467
• /
• 2010

This paper proposes MIMO two-way cooperative relay scheme to optimize the end to end capacity in wireless multi-hop mesh network. The basic idea is to perform data transmission via multi-hop relay nodes, in equidistant topology, this method is quite efficient. However, on one hand this topology is very rare in practical situation, on the other hand, in real practical situation where the topology is most likely non equidistant, the end to end capacity significantly degrades due to bottleneck link caused by uneven SNR. Moreover, the end to end capacity degrades at high SNR due to overreach interference from far nodes existing in multi-hop relay networks. In this paper, MIMO two-way cooperative relay in the region of non equidistant nodes is found efficient to improve the end to end capacity. The proposed scheme is validated using numerical simulation.