• 제목/요약/키워드: Multi Link

검색결과 780건 처리시간 0.039초

NPC 3-레벨 인버터의 스위치 고장시 고장 진단과 중성점 불평형 전압 제어 (Fault Diagnosis and Neutral Point Voltage Control Under the Switch Fault in NPC 3-Level Voltage Source Inverter)

  • 김태진;강대욱;현동석;손호인
    • 대한전기학회논문지:전기기기및에너지변환시스템부문B
    • /
    • 제54권5호
    • /
    • pp.231-237
    • /
    • 2005
  • Many conventional multi-level inverters have detected switching faults by using the over voltage and current. However, fault detection of the switching elements is very difficult because the voltage and current due to each switching fault decrease more than the normal operation. Moreover, the dc-link unbalancing voltage causes a serious problem in the safety and reliability of system when the 3-level inverter faults occur Therefore, this paper proposes the simple fault diagnose method and the neutral-point-voltage control method that can protect the 3-level inverter system from the unbalancing voltage of the do-link capacitors when the faults of switching elements occur in the 3-level inverter that is very efficient in ac motor drives of the high voltage and high power applications. Through experiment results, the validity of the proposed method is demonstrated.

연료전지 발전 시스템용 고주파 링크 DC-AC 컨버터 (A High Frequency Link Direct DC-AC Converter for Fuel Cell Power Source)

  • 송유진;정봉만;한수빈;정학근;박석인
    • 전력전자학회:학술대회논문집
    • /
    • 전력전자학회 2004년도 추계학술대회 논문집
    • /
    • pp.124-126
    • /
    • 2004
  • This paper describes a boost converter cascaded high frequency link direct do-ac converter suitable for fuel cell power sources. A new multi-loop control for a boost converter to reduce the low frequency input current harmonics drawn from fuel cell is proposed. A new PWM technique for the cycloconverter at the secondary to reject the low order harmonics in the output voltages is presented in detail.

  • PDF

KOMPSAT-2 RF COMPATIBILITY TEST FOR S-BAND

  • Cho Seung-Won;Youn Young-Su;Choi Jong-Yeon;Choi Seok-Weon
    • 한국우주과학회:학술대회논문집(한국우주과학회보)
    • /
    • 한국우주과학회 2004년도 한국우주과학회보 제13권2호
    • /
    • pp.344-346
    • /
    • 2004
  • KOMPSAT-2 (Korea Multi Purpose Satellite 2) which is scheduled to launch in 2005 year will communicate with KARI TTC (Tracking, Telemetry, and Command) station flying along sun synchronous orbits (685 km). The command from KARI TTC passes S-band omni-antenna, RF assembly, and transponder and finally reachs OBC (On Board Computer). The telemetry from KOMPSAT-2 arrives at KARI TTC through inverse procedure. In this paper, RF compatibility test between KOMPSAT-2 and KARI TTC station is demonstrated. RF interface for this test was established through real space and uplink signal test and downlink signal test and uplink & downlink signal test were performed.

  • PDF

The modified CP-AFC with Multistage Tracking Mode for WCDMA Reverse Link Receiver

  • Do, Joo-Hyun;Lee, Young-Yong;Kim, Cheol;Rim, Min-Joong;Ahn, Jae-Min;Park, Hyung-Jin
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2002년도 ITC-CSCC -3
    • /
    • pp.1455-1458
    • /
    • 2002
  • In this paper, we propose a modified CP-AFC(Cross-Product Automatic Frequency Control) algorithm to enhance coherent signal detection for WCDMA reverse link receiver. We introduce a moving average filter at the FDD(Frequency Difference Detector) input to increase the number of cross-products, since pilot symbol in WCDMA is not transmitted continuously. We also add normalization algorithm to overcome the conventional CP-FDD's sensitivity to the variance of input signal amplitude and to increase the linear range of S- curve. For rapid frequency acquisition and tracking, we adopt a multi-stage tracking mode. We applied the proposed algorithm in the implementation of WCDMA base station modem successfully.

  • PDF

스마트 안테나를 적용한 기지국 다이버시티에 의한 셀의 용량분석 연구 (Capacity Analysis of Smart Antenna Systems with Macro Diversity)

  • 이명원;한진규;육종관;박한규
    • 한국통신학회논문지
    • /
    • 제27권3B호
    • /
    • pp.212-219
    • /
    • 2002
  • 본 논문에서는 기지국에 스마트 안테나를 사용한 이동 통신 시스템에서 기지국 다이버시티를 고려하여 빔성형 가중치 결정 방법과 전력 제어 방법을 순방향 링크와 역방향 링크에 대해 제시하고 이를 Monte-Carlo 시뮬레이션 방법을 이용하여 확인하였다. 결과에 의하면 역방향 링크에서는 다이버시티 threshold가 증가함에 따라 즉, 이동국이 더 많은 기지국들과 링크함에 따라 셀의 용량이 증가하였다. 이와 반대로 순방향 링크에서는 다이버시티 threshold가 증가할수록 용량이 감소하는 것을 확인할 수 있었다. 본 논문의 결과는 스마트 안테나를 적용한 시스템의 효율적인 무선망 운용 방식 결정의 지표가 될 것으로 기대된다.

구속 받는 3차원 유연 매니퓰레이터 선단의 마찰에 관한 연구 (A Study on End-effector Friction of Constrained Spatial Flexible Manipulator)

  • 김진수
    • 한국생산제조학회지
    • /
    • 제19권4호
    • /
    • pp.449-454
    • /
    • 2010
  • The force control of a constrained flexible manipulators has been one of the major research topics. However, a little effort has been devoted for the relation between friction force and elastic deflection of end-effector for a constrained flexible manipulator. So, the aim of this paper is to clarify the friction mechanism of a constrained spatial multi-link flexible manipulator by changing the material and connected method of end-effector. In this study, a concise hybrid position/force control scheme is applied to the control of a flexible manipulator, and the experimental results for the constrained vertical motion and constrained horizontal motion is presented. Finally a comparison between these results are presented to show the reduction of vibration of link and friction force.

A Distributed Sequential Link Schedule Combined with Routing in Wireless Mesh Networks

  • Cha, Jae-Ryong;Kim, Jae-Hyun
    • ETRI Journal
    • /
    • 제34권3호
    • /
    • pp.462-465
    • /
    • 2012
  • This letter proposes a new distributed scheduling scheme combined with routing to support the quality of service of real-time applications in wireless mesh networks. Next, this letter drives average end-to-end delay of the proposed scheduling scheme that sequentially schedules the slots on a path. Finally, this letter simulates the time division multiple access network for performance comparison. From the simulation results, when the average number of hops is 2.02, 2.66, 4.1, 4.75, and 6.3, the proposed sequential scheduling scheme reduces the average end-to-end delay by about 28%, 10%, 17%, 27%, and 30%, respectively, compared to the conventional random scheduling scheme.

연료전지 발전 시스템용 고주파 링크 DC-AC 컨버터 (A High Frequency Link Direct DC-AC Converter for Fuel Cell Power Source)

  • 송유진;박석인;정학근;한수빈;정봉만
    • 한국조명전기설비학회:학술대회논문집
    • /
    • 한국조명전기설비학회 2005년도 학술대회 논문집
    • /
    • pp.245-249
    • /
    • 2005
  • This paper describes a boost converter cascaded high frequency link direct dc-ac converter suitable for fuel cell power sources. A new multi-loop control for a boost converter to reduce the low frequency input current harmonics drawn from fuel cell is proposed. A new PWM technique for the cycloconverter at the secondary to reject the low order harmonics in the output voltages is presented in detail.

  • PDF

TDMA 네트워크 전술데이터링크 송수신기 구현 및 성능고찰 (A Performance Study of Tactical Data Link Transceiver in TDMA Networks)

  • 남정호;서난솔;장동운
    • 한국군사과학기술학회지
    • /
    • 제13권3호
    • /
    • pp.388-396
    • /
    • 2010
  • Generally, flight information is transmitted by voice signal over legacy UHF radio in ground to air communication system. In this paper, we have implemented the transceiver of TDL(tactical data link) which transmits tactical information, such as flight information, using digital signal. For transmitting digital information over radio path, we have designed data modem that is processing CPFSK modulation, and TDMA(Time Division Multiple Access) network for Synchronization among multi user(platform). By simulating aeronautical propagation modeling with the environment of Korea terrain, it is predicted the maximum performance of communication range of the transceiver. As result of the transceiver's aviational boarding test, it is proved that the transceiver of TDL over legacy UHF radio transmits and receives the tactical information in TDMA network within communication range of 160km.

다성분계 유리를 사용한 광링크장치용 광섬유제조 (Process of Optical Fiber for Optical Link In Multi-Oxide Glass)

  • 이용수;이회관;강원호
    • 한국산학기술학회:학술대회논문집
    • /
    • 한국산학기술학회 2000년도 추계학술대회
    • /
    • pp.169-172
    • /
    • 2000
  • 본 실험에서는 광Link로 응용될 Core Glass와 Clad Glass 및 Clad용 Polymer의 조성을 개발하고, Core용 Glass 와 Clad용 Glass의 match 및 Core Glass와 Clad용 Polymer의 효과적으로 접합 성형하여 반도체제조 설비내의 모든 Data 송ㆍ수신 Link를 Optical Fiber로 대체하여 기존 전선케이블이 전자기장의 영향으로 인한 Noise 와 Data 송ㆍ수신 오류를 일으키는 것을 방지하고자 한다. 따라서, 이에 대한 연구로 우선 유리를 사용한 기초 실험을 실시하였다. 실험 과정에 있어서는 Batch 실험과 용해 실험 및 물성 측정을 통하여 최적 조건의 유리를 선정하였다. 제조된 모유리를 사용하여 유리의 열적, 기계적 성질을 측정하였다. 또한 Glass core/Glass clad 파이버를 제조하여 광학적성질, 기계적성질, 구조적 특성을 평가하였다.