• 천문학회보
• /
• 제35권1호
• /
• pp.39.2-39.2
• /
• 2010

In this paper, I present the domestic development of near infrared camera systems for the ground telescope and the space satellite. These systems are the first infrared instruments made for astronomical observation in Korea. KASINICS (KASI Near Infrared Camera System) was developed to be installed on the 1.8m telescope of the Bohyunsan Optical Astronomy Observatory (BOAO) in Korea. KASINICS is equipped with a $512{\times}512$ InSb array enable L band observations as well as J, H, and Ks bands. The field-of-view of the array is $3.3'{\times}3.3'$ with a resolution of 0.39"/pixel. It employs an Offner relay optical system providing a cold stop to eliminate thermal background emission from the telescope structures. From the test observation, limiting magnitudes are J=17.6, H=17.5, Ks=16.1 and L(narrow)=10.0 mag at a signal-to-noise ratio of 10 in an integration time of 100 s. MIRIS (Multi-purpose InfraRed Imaging System) is the main payload of the STSAT-3 in Korea. MIRIS Space Observation Camera (SOC) covers the observation wavelength from $0.9{\mu}m$ to $2.0{\mu}m$ with a wide field of view $3.67^{\circ}{\times}3.67^{\circ}$. The PICNIC HgCdTe detector in a cold box is cooled down below 100K by a micro Stirling cooler of which cooling capacity is 220mW at 77K. MIRIS SOC adopts passive cooling technique to chill the telescope below 200K by pointing to the deep space (3K). The cooling mechanism employs a radiator, a Winston cone baffle, a thermal shield, MLI of 30 layers, and GFRP pipe support in the system. Opto-mechanical analysis was made in order to estimate and compensate possible stresses from the thermal contraction of mounting parts at cryogenic temperatures. Finite Element Analysis (FEA) of mechanical structure was also conducted to ensure safety and stability in launching environments and in orbit. MIRIS SOC will mainly perform the Galactic plane survey with narrow band filters (Pa $\alpha$ and Pa $\alpha$ continuum) and CIB (Cosmic Infrared Background) observation with wide band filters (I and H) driven by a cryogenic stepping motor.

• 한국결정성장학회지
• /
• 제15권2호
• /
• pp.45-50
• /
• 2005

규소 표면의 기계적 손상은 산화 공정 중에 규소 표면에 여러 가지 형태의 결함들을 발생 시킨다. 규소 표면에 손상을 주는 마모 입자가 커짐에 따라 OISF보다는 etch pit의 형상이 동굴형인 선 결함(line defects)들이 많이 발생된다. 이들 결함들은 실리콘 결정을 성장시키는 단계에서 형성되는 결함들과는 상호 관련이 없다. 방향성 응고법으로 성장된 규소 결정속에 존재하는 결함들은 주로 twin과 stacking fault들이며 응고과정에서 발생이 예상되는 응력에 의한 전위는 거의 발견되지 않았다. 따라서 Czochralski 법으로 성장된 단 결정 규소뿐 아니라 방향성 응고법으로 성장된 다 결정 규소 기판도 표면의 결함들을 이용하여 extrinsic gettering을 통한 규소 결정 내부의 불순물 제거의 가능성이 높다.

• Earthquakes and Structures
• /
• 제18권1호
• /
• pp.27-44
• /
• 2020

This work presents a comparison of three performance-based seismic design methods (PBSD) as applied to plane steel frames having eccentric braces (EBFs) and buckling restrained braces (BRBFs). The first method uses equivalent modal damping ratios (ξ_k), referring to an equivalent multi-degree-of-freedom (MDOF) linear system, which retains the mass, the elastic stiffness and responds in the same way as the original non-linear MDOF system. The second method employs modal strength reduction factors (${\bar{q}}_k$) resulting from the corresponding modal damping ratios. Contrary to the behavior factors of code based design methods, both ξ_k and ${\bar{q}}_k$ account for the first few modes of significance and incorporate target deformation metrics like inter-storey drift ratio (IDR) and local ductility as well as structural characteristics like structural natural period, and soil types. Explicit empirical expressions of ξ_k and ${\bar{q}}_k$, recently presented by the present authors elsewhere, are also provided here for reasons of completeness and easy reference. The third method, developed here by the authors, is based on a hybrid force/displacement (HFD) seismic design scheme, since it combines the force-base design (FBD) method with the displacement-based design (DBD) method. According to this method, seismic design is accomplished by using a behavior factor (q_h), empirically expressed in terms of the global ductility of the frame, which takes into account both non-structural and structural deformation metrics. These expressions for q_h are obtained through extensive parametric studies involving non-linear dynamic analysis (NLDA) of 98 frames, subjected to 100 far-fault ground motions that correspond to four soil types of Eurocode 8. Furthermore, these factors can be used in conjunction with an elastic acceleration design spectrum for seismic design purposes. Finally, a comparison among the above three seismic design methods and the Eurocode 8 method is conducted with the aid of non-linear dynamic analyses via representative numerical examples, involving plane steel EBFs and BRBFs.

• Computers and Concrete
• /
• 제21권5호
• /
• pp.495-504
• /
• 2018

The possibility of earthquakes in vulnerable regions indicates that efficient technique is required for seismic protection of buildings. During the recent decades, the concept is moving towards the insertion of base isolation on seismic prone buildings. So, investigation of structural behavior is a burning topic for buildings to be isolated in base level by bearing device. This study deals with the incorporation of base isolation system and focuses the changes of structural responses for different types of Lead Rubber Bearing (LRB) isolators. A number of sixteen model buildings have been simulated selecting twelve types of bearing systems as well as conventional fixed-base (FB) scheme. The superstructures of the high-rise buildings are represented by finite element assemblage adopting multi-degree of freedoms. Static and dynamic analyses are carried out for FB and base isolated (BI) buildings. The dynamic analysis in finite element package has been performed by the nonlinear time history analysis (THA) based on the site-specific seismic excitation and compared employing eminent earthquakes. The influence of the model type and the alteration in superstructure behavior of the isolated buildings have been duly assessed. The results of the 3D multistory structures show that the lateral forces, displacement, inertia and story accelerations of the superstructure of the seismic prone buildings are significantly reduced due to bearing insertion. The nonlinear dynamic analysis shows 12 to 40% lessening in base shear when LRB is incorporated leading to substantial allowance of horizontal displacement. It is revealed that the LRB isolators might be potential options to diminish the respective floor accelerations, inertia, displacements and base shear whatever the condition coincides. The isolators with lower force intercept but higher isolation period is found to be better for decreasing base shear, floor acceleration and inertia force leading to reduction of structural and non-structural damage. However, LRB with lower isolator period seems to be more effective in dropping displacement at bearing interface aimed at reducing horizontal shift of building structure.

• Journal of Multimedia Information System
• /
• 제7권1호
• /
• pp.1-10
• /
• 2020

The image analysis is an important and predominant task for classifying the different parts of the image. The analysis of complex image analysis like histopathological define a crucial factor in oncology due to its ability to help pathologists for interpretation of images and therefore various feature extraction techniques have been evolved from time to time for such analysis. Although deep reinforcement learning is a new and emerging technique but very less effort has been made to compare the deep learning and deep reinforcement learning for image analysis. The paper highlights how both techniques differ in feature extraction from complex images and discusses the potential pros and cons. The use of Convolution Neural Network (CNN) in image segmentation, detection and diagnosis of tumour, feature extraction is important but there are several challenges that need to be overcome before Deep Learning can be applied to digital pathology. The one being is the availability of sufficient training examples for medical image datasets, feature extraction from whole area of the image, ground truth localized annotations, adversarial effects of input representations and extremely large size of the digital pathological slides (in gigabytes).Even though formulating Histopathological Image Analysis (HIA) as Multi Instance Learning (MIL) problem is a remarkable step where histopathological image is divided into high resolution patches to make predictions for the patch and then combining them for overall slide predictions but it suffers from loss of contextual and spatial information. In such cases the deep reinforcement learning techniques can be used to learn feature from the limited data without losing contextual and spatial information.

• 한국생활과학회지
• /
• 제9권3호
• /
• pp.297-315
• /
• 2000

The purpose of this study is to provide the basic data for the leisure space planning desirable for adolescents through survey on their using leisure space. Four hundred sixty-six middle and high school students living in Chongju city, Gwesan-gun and Eumsung-gun responded the first basic questionnaire and 160 students among them answered again the second questionnaire for more information on the site of leisure space they want. Frequency, percentage, $x^2-test$ and Multi-Dimensional Scale were methods of analysis. The results are as follows. Adolescents are wasting their leisure time because of insufficient facilities for productive activities. They use the time, when observed in one week, roaming around downtown, studying in off-school academies, visiting shops and playing in the game rooms. And when observed in a month, they use time meeting friends in coffee shops, visiting restaurants, studying in the libraries, playing in the ground and visiting sports facilities. Adolescents' leisure time were different according to sex, age, father's educational level, mother's occupation, household income, and living area. Students hoped the leisure spares to be located in the neighborhood where they can access easily, and facilities they wanted were small shop-buildings, game rooms, off-school academies, schools, sports facilities, studying moms and libraries. It is necessary that adolescents have opportunities to learn how to use their leisure time healthy in the leisure space. And consideration on adolescents living in the remote rural area have to be dealt importantly in the beginning of various planning.

• 한국군사과학기술학회지
• /
• 제20권3호
• /
• pp.384-392
• /
• 2017

A linear explosively formed penetrator(LEFP) is a modification of the explosively formed penetrator(EFP). An EFP is axisymmetric and has a dish-shaped liner while LEFP has a rectangular-shaped liner with curved cross section. Upon detonating LEFP forms laterally wide projectile like blade, leaving a long penetration hole on the target. On the other hand, a long-rod tungsten heavy alloy(WHA) penetrator is one of the major threats against most of the ground armored vehicles. In this paper, the feasibility of using an LEFP in protecting against a long-rod WHA penetrator by colliding LEFP into the threat was investigated through a set of numerical simulations. In this study, a scale-down WHA penetrator with length to diameter ratio(L/D) of 10.7 and 7.0 mm diameter was used to represent a long-rod WHA penetrator. LS-DYNA and Multi-Material ALE technique were employed for the simulation. For estimation of the protection effect by LEFP, residual penetration depths into RHA by the threat were compared according to various impact locations against the threat.

• 복식
• /
• 제54권4호
• /
• pp.41-53
• /
• 2004

The significant role of colors in fashion design is not enough to emphasize in terms of one of the important design elements and its influences on the behaviors of the people. The purpose of this research is to examine the traditional Chinese colors and its ways of color combinations to appreciate the Chinese culture and its people. The Chinese traditional costume of Ching Dynasty were investigated through historic records, historic nobles, costume accessories and so on. The results of the study were summarized as follows： (1) The Blue was the most favoured color for clothing among men and women during Ching dynasty and various blues in terms of hue, value and intensities were used. (2) The bright Yellow which had been a symbol of Emperor were prohibited being used among people. Though, the late period of Dynasty, the regulation became not to strict and various shades of yellow families were adapted among People. (3) The Red which had been preferred during Ming Dynasty were constantly favoured for the formal wears of auspicious events such as weddings. (4) Dark color groups were loved for the clothing which were used as a ground colors against the flamboyant patterns revealing strong visual effects through value contrast or primary color combinations. (5) The White had a symbol of mourning and there were some intentions to adopt pale color groups such as mint, jade, gray, moon whit,. silver white to make up for white. (6) Contrast color combinations were one of the basic ways of color combination in Chinese traditional costume. Therefore Chinese color combinations has a strong visual effect and easy to draw attention of people by the contrast of the hue, value or intensity of color. (7) Multi-color combinations were another characteristics of Chinese costume in the formal wears which bears many surface designs. The surface decorated with full of motifs, were appreciated by the people expressing their longings and hopes through the auspicious meanings of patterns and striking visual effects of color combinations.

• 한국재료학회지
• /
• 제17권7호
• /
• pp.390-395
• /
• 2007

We systematically investigated the effects of InAs coverage variation, two-step annealing and an asymmetric InGaAs quantum well (QW) on the structural and optical characteristics of InAs quantum dots (QDs) by using atomic force microscopy (AFM), transmission electron microscopy (TEM) and photoluminescence (PL) measurement. The transition of size distribution of InAs QDs from bimodal to multi-modal was noticeably observed with increasing InAs coverage. By means of two-step annealing, it is found that significant narrowing of the luminescence linewidth (from 132 to 31 meV) from the InAs QDs occurs together with about 150 meV blueshift, compared to as-grown InAs QDs. Finally, the InAs QDs emitting at longer wavelength of $1.3\;{\mu}m$ with narrow linewidth were grown by an asymmetric InGaAs QW. The excited-state transition for the InAs QDs with an asymmetric InGaAs QW was not noticeably observed due to the large energy-level spacing between the ground states and the first excited states. The InAs QDs with an asymmetric InGaAs QW will be promising for the device applications such as $1.3\;{\mu}m$ optical-fiber communication.

• 정보처리학회논문지:소프트웨어 및 데이터공학
• /
• 제5권1호
• /
• pp.29-34
• /
• 2016

다중에이전트 시스템에서 매우 중요한 연구 분야 중 하나는 에이전트소통언어(ACL)의 정의와 ACL의 적당한 공식적 의미론의 제시이다. 본 논문에서는 기존의 두 개의 의미론적 접근방식을 뛰어넘는 언표내적 효과 기반의 FIPA-ACL의 의미론을 제안한다. 제안한 의미론의 주요 개념은 언화행위이론의 언표내적 행위의 성공과 만족조건에 대한 의미론적 개념과 공통근거 기반의 프레임워크에 기초하고 있다. 제안한 의미론을 사용하여 사례연구로 inform과 request와 같은 FIPA-ACL의 대표적인 언화행위를 정의한다. 제안된 의미론의 강점을 보이기 위하여 자동차 판매자와 잠재 고객 간의 전자상거래 에이전트 구매협상을 응용 예로 제시한다. 그리고 기존의 의미론적 방식들과의 비교를 보인다.