This study aims to observe the effect of age friendliness of cities on life satisfaction and to suggest ways to improve quality of life of older people. The secondary data sets were used in this study, which were '2014 Survey of Living Conditions and Welfare Needs of Korean Older People.' It's a nationwide data collected by the Korean Institute of Health and Social Affairs. A multilevel analysis model was used to analyze the data because the level of age friendliness has a hierarchical data structure. Results showed as follows: First, life satisfaction of older adults is affected by the level of age-friendliness of cities in which they live. Second, on the personal level, older people showed low life satisfaction when they are more older and have more chronic diseases and more depressed. On the contrary, life satisfaction of older adults increased when they have higher education and income. Third, on the city level, older people showed higher life satisfaction when they live in high employment rate area and participation rate of lifelong education. Cautions should be placed when interpret the result because the variables that represent the characteristics of age friendless of cities were constituted arbitrary. Based on the results, suggestions for improving the city environment age-friendly and implications for social welfare practice were provided.
Journal of the Korea Academia-Industrial cooperation Society
/
v.19
no.12
/
pp.660-668
/
2018
The main object of this study was to find a way to operate the marker for simulating a virtual construction using a MR(mixed reality) device. The secondary object was to find a way to extract the form-data from BIM data, and to represent the virtual object by the MR device. A tiny error of scale causes large errors of length because the architectural objects are very large. The scale was affected by the way that the camera of the MR device recognizes the marker. The method of installing and operating the marker causes length errors in the virtual object in the MR system. The experimental results showed that the error factor of the Virtual object's length was 0.47%. In addition, the distance between the markers can be decided through the results of an experiment for the multi-marker tracking system. The minimum distance between markers should be more than 5 m, and the error of length was approximately 23mm. If the represented virtual object must be less than 20mm in error, the particular mark should be installed within a 5 m radius of it. Based on this research, it is expected that utilization of the MR device will increase for the application of virtual construction simulations to construction sites.
Kim, Seoung-Yeal;Kim, Whee-Moon;Song, Won-Kyong;Choi, Young-Eun;Choi, Jae-Yong;Moon, Guen-Soo
Journal of the Korean Society of Environmental Restoration Technology
/
v.22
no.5
/
pp.1-12
/
2019
It is important to measure the height of trees as an essential element for assessing the forest health in urban areas. Therefore, an automated method that can measure the height of individual tree as a three-dimensional forest information is needed in an extensive and dense forest. Since airborne LiDAR dataset is easy to analyze the tree height(z-coordinate) of forests, studies on individual tree height measurement could be performed as an assessment forest health. Especially in urban forests, that adversely affected by habitat fragmentation and isolation. So this study was analyzed to measure the height of individual trees for assessing the urban forests health, Furthermore to identify environmental factors that affect forest growth. The survey was conducted in the Mt. Bongseo located in Seobuk-gu. Cheonan-si(Middle Chungcheong Province). We segment the individual trees on coniferous by automatic method using the airborne LiDAR dataset of the two periods (year of 2016 and 2017) and to find out individual tree growth. Segmentation of individual trees was performed by using the watershed algorithm and the local maximum, and the tree growth was determined by the difference of the tree height according to the two periods. After we clarify the relationship between the environmental factors affecting the tree growth. The tree growth of Mt. Bongseo was about 20cm for a year, and it was analyzed to be lower than 23.9cm/year of the growth of the dominant species, Pinus rigida. This may have an adverse effect on the growth of isolated urban forests. It also determined different trees growth according to age, diameter and density class in the stock map, effective soil depth and drainage grade in the soil map. There was a statistically significant positive correlation between the distance to the road and the solar radiation as an environmental factor affecting the tree growth. Since there is less correlation, it is necessary to determine other influencing factors affecting tree growth in urban forests besides anthropogenic influences. This study is the first data for the analysis of segmentation and the growth of the individual tree, and it can be used as a scientific data of the urban forest health assessment and management.
Journal of the Architectural Institute of Korea Planning & Design
/
v.35
no.1
/
pp.73-81
/
2019
The purpose of this study is to draw safe environmental project factors for enhancing the safety of children in peripheral space around children's park and suggest environmental project measures for peripheral spaces around children's parks, based on the survey of children's park users' consciousness on peripheral spaces. Physical space range for this study was limited to low-rise housing area wihtin the radius of 250m, as peripheral spaces around children's parks in which children's playgrounds were built. In addition, the target areas for examining users' consciousness on peripheral spaces around children's parks were selected according to following criteria. 1)areas with highter portion of children; 2) those with higher portion of single-family houses/multi-housing/tenement houses, which constitute low-rise housing areas; and 3) those with higher safety accident rate of children, which was measured based on criminal and traffic accidents. The finding are as follows: first, users' consciousness on safety accidents that are likely to occur in peripheral spaces around children's parks was examined to show that there is most prominent difference between satisfaction and necessity. This result suggests that users are clearly conscious of the necessity of environmental improvement rather than the satisfaction with the current peripheral environment around children's park.; second, for the difference between satisfaction with and necessity of environmental project factors for access/boundary spaces around children's pakrs, there is most significant difference between the satisfaction with and the necessity of establishment of facilities against illegal parking for clear visibility of community roads, for access spaces, and the separate establishment of bicycle racks around main entry into parks, for boundary spaces. Users' necessity of the establishment of them is judged to be derived from the fact that the safety of children and even adults is threatened, because bicycles invaded into the deep inside of children parks. This study analyzed a correlation between satisfaction and necessity through factor and IPA analysis, and should be initially considenred if the future environmental improvement project would be conducted to promote safe environment in peripheral spaces around children's parks in the future. It will be necessary to provide practical environmental project factors through a field investigation.
Objectives: This study aim to determine adolescent meal time, which provides the important context of parent-child sharing time. We divided mealtime into family meal and alone meal, and analyzed the time/space context of each meal time as well as the social determinations. Method: We employed adolescents age 10-18 who live with married patents and attends school at the present (n=5,128) from the original data of Korean Time Use Survey. Results: More adolescent were engaged in family meal rather than eating alone in daily bases. However, the trend show difference by day of week and academic grade; family meal are more prevalent in weekends rather than weekdays. As adolescent reaches high school age, the proportion of eating alone beats the proportion of family meal time. Most of the meal occur at home. Having meal outside was relatively scares, especially on weekdays. Tobit and logistic analysis reveal that, on weekday meal, less school hours, more time spent at the private academy, having family leisure event, and long mother's housework hours were positively associated with family meal time. In weekend model, father's education gradient was associated with family meal time, showing higher the father's education level, there were higher chance of having weekend family meal. As for the eating alone, relevant factors were similar with family meal but the directions were the opposite; having family leisure were negatively associated with alone meal, both weekdays and weekend. Long academy hours, meal preparing and leisure alone were positively associated eating alone. Overall, weekday meal time was strongly linked with adolescent daily schedules and time use, while for weekends meal, in both family meal and alone meal, the influence of parent factors were discovered. Conclusion: The results indicates that alone meal and the family meal are not exclusively related but seem to be complementary. Families tend to enjoy family meal yet, there are some necessary situation that adolescent need to be on their own. Increase in ready-made food industries, growing independence of children by age seem partly allow adolescent children to eat alone. Careful attentions may require for monitoring weekends meal situation and the family factor of adolescent in future studies.
Kim, Handon;Jung, Mincheol;Oh, Donggeun;Cho, Hyunsang;Choi, Seun;Jang, Hyounseung;Kim, Jimin
Korean Journal of Construction Engineering and Management
/
v.23
no.1
/
pp.98-105
/
2022
It is essential for vertical smart farms that artificially grow crops in an enclosed space to properly utilize air environment facilities to create an appropriate growth environment. However, domestic vertical smart farm companies are creating a growing environment by relying on empirical data rather than systematic methods. Using IoT to create a growing environment based on systematic and precise monitoring can increase crop production yield and maximize profitability. This study aims to construct a monitoring system using IoT and to analyze the cause by demonstrating the imbalance of temperature environment, which is a significant factor in crop cultivation. 1) The horizontal temperature distribution of the multi-layer shelf was measured with different operating methods of LED and air conditioner. As a result, there was a temperature difference of "up to 1.7℃" between the sensors. 2) As a result of measuring the vertical temperature distribution, the temperature difference was "up to 6.3℃". In order to reduce this temperature gap, a strategy for proper arrangement and operation of air conditioning equipment is required.
In this study, evaluation and consideration of domestic/overseas design, construction, and quality control performed by the authors on the deep cement mixing method were performed, and improvements for the development of the DCM method were suggested in the future. As a result of this study, it was found that the cross-sectional area correction for strength is required during the laboratory test of mix proportion, and caution is required because the extrapolation method may lead to different results from the actual one. Applicable design methods should be selected in consideration of both the improvement ratio and the type of improvement during design, and it was confirmed that the allowable compressive strength to which the safety factor was applied refers to the standard value for stability review and not the design parameters. In the case of the stress concentration ratio, rather than applying a conventional value, it was possible to perform economical design by calculating the experimental and theoretical stress concentration ratio reflecting the design conditions. In the case where pre-boring is expected during construction, if the increased water content is not large compared to the original, there were cases where a major problem did not occur even if the result that did not consider the increase in water content was used. In addition, it was confirmed that when the ratio of the top treatment length to the improved length is high, a small amount of design cement contents per unit length can be injected during construction. In the case of quality control, it was evaluated that D/4~2D/4 for single-axis and D/4 point for multi-axis were optimal for coring of grouting mixtures. As an item for quality control, it is judged that the standard that considers the TCR along with the unconfined compressive strength of grouting mixtures is more suitable for the domestic situation.
The Journal of the Convergence on Culture Technology
/
v.7
no.4
/
pp.211-225
/
2021
The purpose of this study was to investigate the effect of academic self-efficacy, task value, behavioral participation, cognitive participation, emotional participation, and initiative participation on learning satisfaction in 462 college students who took a flip learning class. Results, As for the direct effect of variables affecting learning satisfaction, behavioral participation was the largest factor, followed by initiative participation, task value, emotional participation, and academic self-efficacy. These variables explained 86% of learning satisfaction. Academic self-efficacy and task value had an indirect effect on learning satisfaction through behavioral, emotional, and proactive participation. In the multi-group moderating effect with the upper-middle class (B+ or higher) and the lower-middle class (below B) group as the moderating variables, there was a partial moderating effect because the path coefficients of leading participation and learning satisfaction differed between the groups. It is necessary to seek various ways to increase the degree of participation in learning and to develop an intervention strategy through a program tailored to each individual.
In order to respond to carbon neutrality and climate change in agriculture, agricultural machinery, which has been developed centered on internal combustion engines, needs to be converted to an electric-based technology that does not emit greenhouse gases. In this study, simulations for electric UTV suspension design were performed to reduce vibration and shock of electric UTV for agricultural use and to improve driving stability and control performance of the vehicle. The simulation was performed by dividing the tolerance load of the vehicle body and the loaded load state. The range of motion of the suspension spring of UTV is within 30% of the range of motion under condition B under tolerance, the displacement of the UTV suspension with full load is reduced from 264mm to 121mm, and the damping speed is 260mm/s to 300mm/s that it can be seen that the range of motion is within 60%. Suspension design of electric UTV for multi-purpose agricultural work is a very important factor for maintaining agricultural work ability in towing work such as tillage as well as driving and terrain adaptation. The results of this study can be usefully used to determine the spring parameters with the appropriate damping range so that the electric UTV can be used for various agricultural tasks.
The purpose of this study was examine the depression among Mongolians in South Korea. We also determined the effect of acculturative stress and social support on depression. In this study, total of 200 adults over age 18 completed the BDI-II of Mongolian Version, Acculturative stress scale for international student, The Multi-dimensional Scale of Perceived Social Support. Data were analyzed by using the factor analysis, correlation analysis, t-test, and hierarchical regression analysis. We used SPSS 22.0, AMOS 22.0. We found significant difference in mean scores between groups according to socio-demographic characteristics. The level of depression was high in over 3 years immigrants group (M = 8.41, SD = 9.6954), marriage immigrants group (M = 19.1, SD = 16.7649), and female groups (M = 7.61, SD = 9.2188) than compared to reference groups. Acculturative stress and social support of Mongolian immigrants had a significant impact on depression (β = .365, p <.001; β = .- 555, p <.001). There was a moderating effect of social support on the relationship between acculturative stress and depression (β = 1.080, p <.001). The limitations and implications of the study were discussed. We conclude that this study can be used to assess the depression and the mental health of Mongolians in South Korea.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.