• Journal of Digital Convergence
• /
• v.11 no.11
• /
• pp.85-94
• /
• 2013

This paper presents a novel mobile measurement system with multi antennas which enable mobile measurement as well as fixed measurement with telescope mast. Proposed system installed 4 omni directional antennas for the space diversity process and one directional log periodic antenna for the simultaneous conventional fixed measurement. Whole antenna systems are connected to the custom DTV channel analyzers with Ethernet networks respectively and processed by the main controller to calculate real time average receive levels. To prove the performance of proposed system, the typical receive models are categorized as 3 area types - open area, building area and house area, and then intensive field tests were performed through mobile and fixed measurement phases. With these measurement data, the relationships between mobile and fixed measurement are analyzed, and the concept of compensation factor is proposed to assume the average receive level of signal. The field test is fulfilled as a co-work with public broadcasters and the proposed system is applied to the intensive coverage measurement projects for metropolitan areas by the korean government agencies.

• Convergence Security Journal
• /
• v.12 no.1
• /
• pp.35-42
• /
• 2012

Increase of data traffic and the advent of new real-time services require to change from the traditional TDM-based (Time Division Multiplexing) networks to the optical networks that soft and dynamic configuration. Voice and lease line services are main service area of the traditional TDM-based networks. This optical network became main infrastructure that offer many channel that can convey data, video, and voice. To provide high resilience against failures, Packet-optical networks must have an ability to maintain an acceptable level of service during network failures. Fast and resource optimized lightpath restoration strategies are urgent requirements for the near future Packet-optical networks with a Generalized Multi-Protocol Label Switching(GMPLS) control plane. The goal of this paper is to provide packet-optical network with a hierarchical multi-layer recovery in order to fast and coordinated restoration in packet-optical network/GMPLS, focusing on new implementation information. The proposed schemes do not need an extension of optical network signaling (routing) protocols for support.

• Proceedings of the Korean Information Science Society Conference
• /
• 2007.10b
• /
• pp.435-440
• /
• 2007

Wireless sensor networks are sensing, computing, and communication infrastructures that allow us to sense events in the harsh environment. The networks consist of many deployed sensor nodes. Each sensor node senses and transmits the sensed data to the administrator or base station of the networks. The sensor nodes are generally remotely-deployed, and therefore, software update must be done at run-time via communication channel. The software code update protocol should be energy-efficient to maximize lifetime of the sensor nodes. In this paper, we present a MCUP, which is a multi-level code update protocol for resource-constrained sensor nodes. MCUP enables energy-efficient code update by supporting multi-level code management. Our simulation results show that MCUP can reduce energy consumption compared with the existing one-level code update schemes.

• Journal of Wetlands Research
• /
• v.20 no.4
• /
• pp.446-457
• /
• 2018

Forecasting of flood wave travel time is very important in terms of river management and operation. Recently, the hydrological environment of has changed due to the construction of multi-function weir in the river. It is necessary to analyze flood wave travel time, including hydraulic structures in the channel. The flood wave travel time according to the discharge and downstream water level operating conditions was analyzed using HEC-RASver5.0.3 which is capable a two-dimentional analysis. This study showed nonlinear characteristics of flood wave travel times due to increase of discharge and operating conditions. The results of this study will be helpful for the operation of multi-function weir as well as the river operation.

• The Korean Journal of Pain
• /
• v.23 no.2
• /
• pp.99-108
• /
• 2010

Chronic pain is a multifactorial condition with both physical and psychological symptoms, and it affects around 20% of the population in the developed world. In spite of outstanding advances in pain management over the past decades, chronic pain remains a significant problem. This article provides a mechanism- and evidence-based approach to improve the outcome for pharmacologic management of chronic pain. The usual approach to treat mild to moderate pain is to start with a nonopioid analgesic. If this is inadequate, and if there is an element of sleep deprivation, then it is reasonable to add an antidepressant with analgesic qualities. If there is a component of neuropathic pain or fibromyalgia, then a trial with one of the gabapentinoids is appropriate. If these steps are inadequate, then an opioid analgesic may be added. For moderate to severe pain, one would initiate an earlier trial of a long term opioid. Skeletal muscle relaxants and topicals may also be appropriate as single agents or in combination. Meanwhile, the steps of pharmacologic treatments for neuropathic pain include (1) certain antidepressants (tricyclic antidepressants, serotonin and norepinephrine reuptake inhibitors), calcium channel ${\alpha}2-{\delta}$ ligands (gabapentin and pregabalin) and topical lidocaine, (2) opioid analgesics and tramadol (for first-line use in selected clinical circumstances) and (3) certain other antidepressant and antiepileptic medications (topical capsaicin, mexiletine, and N-methyl-d-aspartate receptor antagonists). It is essential to have a thorough understanding about the different pain mechanisms of chronic pain and evidence-based multi-mechanistic treatment. It is also essential to increase the individualization of treatment.

• The Journal of Fisheries Business Administration
• /
• v.41 no.3
• /
• pp.103-127
• /
• 2010

The FAO reports that IUU fishing activities have widespread economic, social, and management consequences, including depriving legitimate fishers of harvest opportunities. It affects all fisheries from small scale to industrial. It also affects the ability of governments to support sustainable livelihoods for fishers and, more broadly, to achieve food security. The complexity of IUU requires various measures to combat IUU fishing such as adoption of IUU vessel lists; stronger port State controls; improved monitoring, control and surveillance (MCS); implementation of market-related measures to help ensure compliance; and capacity-building assistance. Trade and market measures reduce opportunities for IUU fishing activities by precluding or impeding access to markets for IUU product in a manner consistent with international law. ICCAT, CCAMLR, and IATTC, have put in place trade tracking programs or catch documentation schemes, and WCPFC is considering such a program. Vessel lists assist enforcement authorities in determining which vessels are or are not authorized to be fishing or conducting fishing support activities in specified areas. A number of RFMOs maintain records of IUU vessels: CCAMLR, IATTC, ICCAT, NAFO, NASCO, NPAFC, WCPFC. Section 608 of the US MSRA calling on the Secretary of Commerce, in consultation with the Secretary of State, and in cooperation with relevant regional fishery management councils and any relevant advisory committees, to take actions to improve the effectiveness of international fishery management organizations in conserving and managing stocks under their jurisdiction. EU IUU Regulation entered into force on 1 January 2010, was intended to regulate the highly complex multi-channel fisheries supply system of the European Community (EC) in an effort to improve global fisheries sustainability.

• International journal of advanced smart convergence
• /
• v.8 no.3
• /
• pp.69-77
• /
• 2019

Today, most of elevators have an emergency call facility for emergency situations. However, if the network installed in the elevator is also out of power, it cannot be used for the elevator remote monitoring and management. So, we develop an integrated and unified emergency call system, which can transmit not only telephone call but also data signals using PSTN(Public Switched Telephone Network) in order to remote monitoring and management of elevators, even though a power outage occurs. The proposed integrated emergency call system to process multiple data such as voice and operational information is a multi-channel board system which is composed of an emergency phone signal processing module and an operational information processing module in the control box of elevator. In addition, the RMS(remote management server) systems based on the Web consist of a dial-up server and a remote monitoring server where manages the elevator's operating information, status records, and operational faults received via the proposed integrated and unified emergency call system in real time. So even if there's a catastrophic emergency, the proposed RMS systems shall ensure and maintain the safety of passengers inside the elevator. Also, remote control of the elevator by this system should be more efficient and secure. In near future, all elevator emergency call system need to support multifunctional capabilities to transmit operational data as well as phone calls for the safety of passengers. In addition, for safer elevators, it is necessary to improve them more efficiently by combining them with high-tech technologies such as the Internet of Things and artificial intelligence.

• The Journal of Information Systems
• /
• v.26 no.3
• /
• pp.295-312
• /
• 2017

Purpose Consumption behaviors of consumers have changed with the widespread use of the Internet and smart phones, and accordingly online marketing activities are becoming ever more prevalent. Yet, the domestic food-service industry has yet to offer an Omni-Channel order system that encompasses a online, offline, and mobile interface. Also, a multilingual menu ordering service for foreign tourists is not yet available. Therefore, if an order service system accessible online and offline which could provide multi-language services were implemented, the satisfaction of the service provider and domestic and foreign customers would be maximized. Design/methodology/approach By designing an electronic menu based on open an OS and providing electronic menus in offline stores, we have completed the design of a linked order system which would be available everywhere (online, offline, and mobile). The CMS was developed to integrate these three mediums and the entire operator was designed to receive basic information and statistical information about the merchants, or store operators. Also, a multilingual term dictionary containing menu information for foreign tourists was made into a database so that foreign tourists who are having difficulty in communication can use it more easily. Findings We have made it possible for customers to use the order service without distinction between online, offline, and mobile platforms, and have proved that it is a more efficient and convenient service for customers as well as operators. Nevertheless, as an initial model, the implemented system has limitations on the execution of the payment support method in the electronic menu board and in the management division of the CMS. In case of commercialization, it is necessary to make an alliance of efforts to attract initial franchises. Through further supplementation, we expect the online and offline connection-types martservice system will maximize the satisfaction of both operators and customers alike.

• Journal of Communications and Networks
• /
• v.6 no.3
• /
• pp.216-225
• /
• 2004

In a cellular network, if there are too many data users in a cell, data may suffer long delay, and system's quality-of-service (QoS) will degrade. Some traditional schemes such as dynamic channel-allocation scheme (DCA) will assign more channels to hot (or overloaded) cells through a central control system (CC) and the throughput increase will be upper bounded by the number of new channels assigned to the cell. In mobile-assisted data forwarding (MADF), we add an ad-hoc overlay to the fixed cellular infrastructure and special channels-called forwarding channels- are used to connect mobile units in a hot cell and its surrounding cold cells without going through the hot cell's base station. Thus, mobile units in a hot cell can forward data to other cold cells to achieve load balancing. Most of the forwarding-channel management work in MADF is done by mobile units themselves in order to relieve the load from the CC. The traffic increase in a certain cell will not be upper bounded by the number of forwarding channels. It can be more if the users in hot cell are significantly far away from one another and these users can use the same forwarding channels to forward data to different cold neighboring cells without interference. We find that, in a system using MADF, under a certain delay requirement, the throughput in a certain cell or for the whole net-work can be greatly improved.

• Journal of the Ergonomics Society of Korea
• /
• v.32 no.6
• /
• pp.517-528
• /
• 2013

Objective: The objective of this study was to suggest a multi-modal controller type for Smart TV Control. Background: Recently, many issues regarding the Smart TV are arising due to the rising complexity of features in a Smart TV. One of the specific issues involves what type of controller must be utilized in order to perform regulated tasks. This study examines the ongoing trend of the controller. Method: The selected participants had experiences with the Smart TV and were 20 to 30 years of age. A pre-survey determined the first independent variable of five tasks(Live TV, Record, Share, Web, App Store). The second independent variable was the type of controllers(Conventional, Mouse, Voice-Based Remote Controllers). The dependent variables were preference, task completion time, and error rate. The experiment consist a series of three experiments. The first experiment utilized a uni-modal Controller for tasks; the second experiment utilized a dual-modal Controller, while the third experiment utilized a triple-modal Controller. Results: The first experiment revealed that the uni-modal Controller (Conventional, Voice Controller) showed the best results for the Live TV task. The second experiment revealed that the dual-modal Controller(Conventional-Voice, Conventional-Mouse combinations) showed the best results for the Share, Web, App Store tasks. The third experiment revealed that the triple-modal Controller among all the level had not effective compared with dual-modal Controller. Conclusion: In order to control simple tasks in a smart TV, our results showed that a uni-modal Controller was more effective than a dual-modal controller. However, the control of complex tasks was better suited to the dual-modal Controller. User preference for a controller differs according the Smart TV functions. For instance, there was a high user preference for the uni-Controller for simple functions while high user preference appeared for Dual-Controllers when the task was complex. Additionally, in accordance with task characteristics, there was a high user preference for the Voice Controller for channel and volume adjustment. Furthermore, there was a high user preference for the Conventional Controller for menu selection. In situations where the user had to input text, the Voice Controller had the highest preference among users while the Mouse Type, Voice Controller had the highest user preference for performing a search or selecting items on the menu. Application: The results of this study may be utilized in the design of a controller which can effectively carry out the various tasks of the Smart TV.