• Journal of Life Science
• /
• v.20 no.3
• /
• pp.381-387
• /
• 2010

To find offspring of Jeju Black cattle (JBC) produced by embryo transfer (ET) and artificial insemination (AI), a molecular genetic study was carried out in candidate cattle populations collected from cattle farms in Jeju Island, Korea. The genetic marker set was composed of 11 ISAG microsatellite (MS) markers, 11 SAES MS markers selected by our preliminary analysis for population diversity of JBC and two major coat color related genes: MC1R and ASIP. The results showed a combined non-exclusion probability for first parent (NE-P1) that was higher than that recommended by ISAG (above 0.9995), and a combined non-exclusion probability for sib identity of $5.3{\times}10^{-10}$. Parentage analysis showed that the cases identified the candidate's father only (77.0%), mother only (54.0%), and both parents (40.5%) in the candidate offspring population. The ET and AI calves were identified as 14.7% in the in vitro fertilized eggs provided and 32.4% in total population, respectively. However, the result from ISAG marker analysis showed 3 identical allele-combinations in 7 calves, and that from ISAG/SAES MS marker combination also showed 1 identical allele-combination in 2 calves. Data from MS and coat-color gene analyses provided information for complete identification of all animals tested. Because the present JBC population was mostly bred using small nuclear founders through bioengineering techniques such as AI and ET, the genetic diversity levels obtained from MS analysis in the JBC population were relatively lower than those of other cattle populations, including Hanwoo. The results suggested that the more efficient marker combinations, including coat color related genotypes, should be studied and used for constructing a system for identification and molecular breeding of JBC as well.

• Molecules and Cells
• /
• v.42 no.4
• /
• pp.356-362
• /
• 2019

The binding of MS2 bacteriophage coat protein (MCP) to MS2 binding site (MBS) RNA stem-loop sequences has been widely used to label mRNA for live-cell imaging at single-molecule resolution. However, concerns have been raised recently from studies with budding yeast showing aberrant mRNA metabolism following the MS2-GFP labeling. To investigate the degradation pattern of MS2-GFP-labeled mRNA in mammalian cells and tissues, we used Northern blot analysis of ${\beta}$-actin mRNA extracted from the Actb-MBS knock-in and $MBS{\times}MCP$ hybrid mouse models. In the immortalized mouse embryonic cell lines and various organ tissues derived from the mouse models, we found no noticeable accumulation of decay products of ${\beta}$-actin mRNA compared with the wild-type mice. Our results suggest that accumulation of MBS RNA decay fragments does not always happen depending on the mRNA species and the model organisms used.

• The Journal of Korean Academy of Prosthodontics
• /
• v.52 no.3
• /
• pp.165-176
• /
• 2014

Purpose: The effects of desensitizing agent are often for a short duration. One of the reasons is believed to be wear of desensitizing agent by tooth brushing. To reduce the wear and make the duration longer, dental bonding resin was applied and the changes of dentin permeability after toothbrushing were measured. Materials and methods: Extracted teeth free from caries were chosen. Coronal dentin discs with thickness of 1 mm were prepared. Using the split chamber device developed by Pashely, hydraulic conductance and scanning electron microscope images (SEM) were compared and contrasted before and immediately after the application of desensitizing agent and bonding resin and then after equivalent tooth brushing of 1 week, 2 weeks, and 6 weeks. Four commercially available desensitizing agents were used in this study; they were All-Bond 2, Seal & Protect, Gluma, and MS Coat. And Dentin/Enamel Bonding resin (Bisco Inc.) was used. The results of this study are as follows. Results: On all specimens, the hydraulic conductance decreased after the application of tooth desensitizing agent and bonding resin. Compared with the specimens treated only with desensitizer, the specimens treated with All-Bond 2, Gluma, MS Coat and plus D/E bonding resin had a little increase in hydraulic conductance after 1, 2 and 6-week tooth brushing. In case of Seal & Protect, the specimens showed the same result only after 6-week tooth brushing. On examination of SEM, the dentinal tubule diameter had decreased after treatment of desensitizing agents and bonding resin. And the specimens treated with All-Bond2, Seal&Protect, Gluma, MS Coat and plus D/E bonding resin had an significant decrease in diameter of dentinal tubule after 6-week tooth brushing. Conclusion: According to the results of this study, it is effective to use bonding resin after application of desensitizer in reducing the wear by tooth brushing and making the duration longer. In this study, just 6-week tooth brushing was performed, and it is not enough to regard it as a long-term data. So further study is needed and more perfect method for treating dentin hypersensitivity should be developed.

• Journal of Plant Biotechnology
• /
• v.7 no.1
• /
• pp.57-65
• /
• 2005

The $F_1$ hybrid Red Coat is one of the most highly sought after cultivars of tomato in Australia and yields up to 7.5 $\cal{kg/plant}$. An experiment was conducted to de-termine the optimal strength and type of growth medium and sucrose concentration for shoot organogenesis of the Red Coat cultivar using cotyledonary explants. Two basal growth media, viz. MS and Gamborg' s $B_5$ at 0, 1/4, 1/2, full or double strength along with sucrose concentrations of 0, 0.5, 1.5, 3 or $5\%$, were evaluated using 25 replications. The main effects of treatment and their mutual interactions were evaluated for the proportion of explants that produced callus and/or shoots, number of shoots produced per explant, callus diameter and shoot height. The explants failed to produce shoots in the absence of mineral nutrient. Only a small proportion of the explants ($6\%$ with $B_5\;and\;3\%$ with MS) regenerated shoots in the absence of sucrose. Lower sucrose concentrations ($0.5-1.5\%$) along with full strength media were optimal for most of the traits studied. The $B_5$ medium outperformed MS medium for shoot organogenesis. For all the traits examined, significant differences in main effects (P < 0.05) and two-way interactions were detected, but no three-way interactions (medium type $\times$ medium concentration $\times$ sucrose concentration) were observed. Sucrose was found essential for the development of chlorophyll. Chlorophyll content increased with an increase in sucrose concentration up to $3\%$ and decreased at $5\%$ sucrose.

• Journal of Forest and Environmental Science
• /
• v.34 no.5
• /
• pp.388-394
• /
• 2018

An efficient and reproducible protocol for in vitro germination of seeds of Couroupita guianensis has been developed in the present study. Couroupita guianensis is a medicinally important tree and categorized as threatened plant species by the IUCN. The seeds were surface sterilized using 0.1% $HgCl_2$ and inoculated on MS (Murashige and Skoog) and Woody Plants (Llyod and McCown) medium. The seeds with partially removed seed coat responded better (100%) on half strength MS medium as compared to the full (51%), one-fourth strength MS (79%) and the WP medium. Half strength MS medium conjunct with $2.0mg{\cdot}L^{-1}$ indole-3 butyric acid (IBA) was found best among the different types of auxins and cytokinins tested for seed germination, as all the seeds germinated on this medium combination. The seedlings were successfully hardened in the greenhouse and restored in the field with 83% survival rate. The protocol can be used as conservation measure for large scale multiplication of this threatened forest tree species.

• Korean Journal of Plant Resources
• /
• v.13 no.1
• /
• pp.48-53
• /
• 2000

Lacquer tree can be proliferated by root or stem cutting, and seed. In case of proliferation by seed, however, the germination rate is very low. Thus, the present study was carried out to obtain aspceptic lacquer plant in vitro from seed because natural tissue culture was highly defiled by unknown fungi and bacteria. First seed grading on distilled water was 50.7% and second seed grading was 20.8% after 98% sulfuric acid treatment for 2 hours. Removal of inner seed coat was higher with 32.4% than non-removal of outer seed coat and removal outer seed coat in rooting rate. In germination rate according to pre-treatment, growth regulators were not effective at all, but sulfuric acid was effective a little with 3%. Removal outer seed coat was increased about 4%, that germinated about 10% in MS medium supplemented with 1.0mg/L BA and 0.05mg/L NAA, 1.0mg/L BA. Lacquer tree seeds germinated after 10 days in MS medium, and aspceptic seedling of lacquer tree were obtained after 3 weeks in vitro. Germination rate, however, was lower about 10%.

• Journal of Periodontal and Implant Science
• /
• v.35 no.4
• /
• pp.991-1002
• /
• 2005

The purpose of this study was to compare the effect of desensitizing agents applied on hypersensitive root surface following periodontal treatment. This study included 21 subjects(168 vital teeth). To evaluate dentin sensitivity, three clinical tests(tactile, air stream, cold water) were tried and three different densensitizing agents(MS coat, Elmex gel. Superseal) were individually applied. After application, reassessment was done at 1 minute, 1 week, 1 month and 3 months. The results were as follows : 1. The degree of dentin sensitivity was measured highly in the sequence of cold water, air stream and tactile and significantly decreased in all four groups with lapse of time(p<0.05). 2. There was no significant difference between all four groups in the tactile test with lapse of time. 3. There was no significant difference between three experimental groups in the air stream test with lapse of time. however, one minute later, it was measured highly in the sequence of Superseal, MS coat and Elmex 4. There was no significant difference between three experimental groups in the cold water test with lapse of time. As a result of this study, all of three agents were significantly effective in reducing dentin hypersensitivity and these agents could be positively employed to patients complaining of dentin hypersensitivity following periodontal treatment.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2002.10a
• /
• pp.63-67
• /
• 2002

The induced chemical and salt solution in water or admixture are originated to the corrosion process of the steeo rebar. These liquids penetrate into concrete as the accompanied by the chemical reaction and cause to attack the steel rebar in concrete. Concrete surfaces which it exposed to deicing, water and sea water is allowed to enter the chlorides in the structures. To prevent from the source of corrosion and deterioration Is subjected to put an end to corrode or reduce to contaminate on the steel rebar. As this reason the MCI 2022 products are applied to the surface of concrete and steel rebar. The concrete samples were made of to the kind of four, i.e. RF, MR, MS, and MM. Corrosion inhibitor is applied to coat on the surface of concrete after it had been cured for 28days. Specimen were immersed in a 3.5％ sodium chloride solution. Concrete specimen were tested to determine the changes of the resistance polarization, Rp, over a 22 weeks period. MCI 2022 is significantly shown the corrosion inhibition of steel rebar in 3.5% NaCl solution. In the each different concrete sample, MS and MM is seemed to be better than others. The results are proofed that MCI 2022 is promised to maintain the inhibition of corrosion with high resistance polarization of the steel rebar in concrete.

• Food Science and Biotechnology
• /
• v.18 no.6
• /
• pp.1470-1475
• /
• 2009

The seed coat of the black soybean contains 3 main anthocyanins such as delphinidin-3-O-$\beta$-glucoside, cyanidin-3-O-$\beta$-glucoside, and petunidin-3-O-$\beta$-glucoside. As a part of our effort on discovering and breeding new black soybean cultivars which possesses specific anthocyanin component rich, we determined the anthocyanin profiles of the 2 cultivars recently developed soybean cv. Gaechuck #1 and cv. Gyeongsang #1, using liquid chromatography-tandem mass spectrometry (LC-MS/MS) and compared their content and identity with those of previously known 10 cultivar controls. The Cosmosil-$5C_{18}$-AR-II column were selected for the analysis because of the best peak separation. The column temperature was set up at $35^{\circ}C$. The mobile phase consisting of water containing 0.5%(v/v) formic acid and methanol gave good separation between the 3 anthocyanin analytes and internal standard (quercetin 3-O-$\beta$-rutinoside) and peaks with suppressed tail. The MS/MS spectra of each individual anthocyanin standard were detected in positive electron spray ionization (ESI) modes. It was disclosed that the anthocyanin contents of the soybean cv. Gaechuck#1 and cv. Gyeongsang#1 are roughly higher than those of the 10 controls.

• Journal of Plant Biotechnology
• /
• v.33 no.4
• /
• pp.263-270
• /
• 2006

Pongamia pinnata Pierre is a tree legume, having potential in production of raw material for biodiesel. A protocol for in wk propagation of this plant was standardized using seedling explants. Growth regulators (GR) including gibberellic acid $(GA_3),\;N^6-benzylaminopurine(BA)$, thidiazuron (TDZ), and Adenine sulphate (Ads) were tested for optimum germination of seeds. Removal of seed coat prior to germination, controlled fungal growth partially but enhanced bacterial growth. Antibiotic cefotaxime was ineffective in controlling bacterial contamination. Seedling derived nodal explants and cotyledon nodes with attached cotyledons were excised and cultured for induction of shoots. Optimum sprouting and multiplication of shoot buds were obtained in MS medium supplemented with $8.88{\mu}M$ BA. These buds differentiated and rooted on medium devoid of GR. Optimum growth of Pongamia seedling was obtained in cotton plugged culture vessels. Reculturing of the cotyledon node explants produced more shoots from the same site. This process of removing shoots and reculturing of cotyledon node was followed for eight passages yielding 4 to 8 shoots in each cycle. The shoots (75%) rooted on half strength MS basal medium supplemented with 0.22% charcoal. All plants survived on transfer to soil. This is the first report on in vitro regeneration of Pongamia pinnata. This report demonstrates the possibility of coupling more than one parameter in single experiment to hasten the process of standardization. The process of cycling the nodal explant repeatedly for production of large number of shoots from single meristem may find application in genetic transformation experiments wherein meristems are used for transformation.