• 한국응용곤충학회지
• /
• 제17권2호
• /
• pp.81-87
• /
• 1978

잠자의 중요한 병인 역병(Phytopthora infestans)은 우리나라의 주요씨감자 생산지대인 중부 고랭지대에서 매년 심한 피해를 초래하고 있는데 만일 포장에 역병이 처음 관찰된 후 약제를 살포치 않으면 식물체의 지상부는 14일 이내에 완전고사 하게 된다. 규칙적인 약제살포로 역병방제가 가능하지만 더욱이 역병발생예보에 따라 적기에 약제살포하므로써 방제효과는 물론 생산비를 절감할 수 있게 된다. 본 시험은 1970-1977년 8년간에 걸쳐 대관령의 기상상태와 역병발생 상황을 조사한바 7일 평균기온과 7일 적산강수량을 사용한 Hyre씨의 이동그라프(Moving graph)법에 의한 예보는 정확성이 높지 않았으나 여기에 상대습도와 7일 평균최저기온을 첨가하므로서 비교적 "Moving graph" 법에 의한 예보의 정확성을 높일 수가 있었다. 그러나 아직도 보다 정확한 역병예찰을 위하여 계속적인 조사시험이 필요하다고 생각된다. 또한 약제를 살포하는 곳에서의 역병에 감수성인 품종의 수량은 역병발생정도와 강우량과 밀접한 관계가 있었으며 특히 대관령 지방에서 감자 파종 후 역병발생까지의 일수와 파종 후 90일 수량으로 그 해의 씨감자의 수확양과 공급량을 미리 예측할 수 있게 할 것으로 사료된다.

• 감성과학
• /
• 제25권1호
• /
• pp.67-78
• /
• 2022

ICT 산업의 글로벌 시장을 선점할 수 있는 다음 세대의 개발이 필요한 상황이 일어남에 따라 웨어러블 디바이스의 생체 신호 모니터링에 대한 관심이 크게 증가하고 있다. 이에 따라 본 연구에서는 히스테리시스가 적은 E-Band를 사용하여 단일벽 탄소나노튜브(SWCNT) 분산 용액에 함침 공정을 통해서 저항형 직물 인장 센서(Resistive textile strain sensor)를 개발하였다. 전기전도성이 부여된 e-band에 저항 신호를 측정하기 위해 만능재료시험기(UTM)과 Microcontroller unit인 아두이노와 LCR 미터를 이용해서 인장의 변화에 따른 저항 변화를 측정하였다. 원단으로 이루어진 텍스타일 스트레인 센서의 특성상 발생하는 다양한 노이즈들을 효과적으로 처리하기 위하여 신호처리 과정(Signal processing)의 노이즈 필터링의 이동평균 필터, 사비츠키-골레이 필터, 중앙값 필터들을 사용하여 센서의 필터 성능을 평가하였다. 그 결과 이동평균 필터의 필터링 결과의 신뢰도가 최소 89.82%, 최대 97.87%으로 이동평균 필터링이 텍스타일 스트레인 센서의 노이즈 필터링 방식으로 적합하였다.

• 한국실내디자인학회논문집
• /
• 제20권1호
• /
• pp.165-172
• /
• 2011

Visitors' behaviors within an exhibition space are a substantial means to grant spatial arrangement and validity of exhibits. Therefore, the study analyzed visitors' behaviors in the viewpoint of attraction power and holding power of exhibits on the basis of exhibition layout of real science museums. Through the analysis, the study grasped efficiency of analysis index and exhibition environment elements which might have an effect on planning the exhibition space of a large-scale museum and producing detailed ranges of exhibition. The main indicators used are: 1. Attraction power: it indicates the relative incidence of people who have stopped in front of an object/exhibit during the exhibition tour. It is calculated by dividing the number of people who stop by the total number of people who have visited the museum or gallery. 2. Holding power: it measures the average time spent in front of an information/communication element. It is calculated by dividing the average time of stay by the time "necessary" to read an element. As a result, It was expected that attraction power and holding power of exhibit would be increased when moving line of seeing was inductive. However, when the traffic movements of seeing was inductive, repetitive seeing of exhibit was almost never realized and visitors had a strong tendency which viewed on their way of moving without viewing on their way of stopping. On the other hand, it may mean that density of exhibit is low or size of exhibition space is small that most of exhibits within exhibition space have high attraction power and holding power. As Gwacheon National Science Museum, when a museum is composed of many large-scale exhibit halls, it should be formed by separating the main moving line of seeing from the optional moving line of seeing through visitors' natural choice of exhibit and proper inducement of moving line of seeing. In such structure, exhibition environment of the main moving line has an effect on attraction of exhibit and the use of optional moving line acts as a factor to increase attraction. In addition, it is thought that attribute of exhibit and proper arrangement of rest space within exhibition space will increase holding power of exhibit.

• ETRI Journal
• /
• 제23권4호
• /
• pp.190-198
• /
• 2001

The performance of Motion Compensated Discrete Cosine Transform (MC-DCT) video coding is improved by using the region adaptive subband image coding [18]. On the assumption that the video is acquired from the camera on a moving platform and the distance between the camera and the scene is large enough, both the motion of camera and the motion of moving objects in a frame are compensated. For the compensation of camera motion, a feature matching algorithm is employed. Several feature points extracted using a Sobel operator are used to compensate the camera motion of translation, rotation, and zoom. The illumination change between frames is also compensated. Motion compensated frame differences are divided into three regions called stationary background, moving objects, and newly emerging areas each of which is arbitrarily shaped. Different quantizers are used for different regions. Compared to the conventional MC-DCT video coding using block matching algorithm, our video coding scheme shows about 1.0-dB improvements on average for the experimental video samples.

• Journal of Positioning, Navigation, and Timing
• /
• 제4권2호
• /
• pp.87-95
• /
• 2015

In this study, the temporal and spatial variation in precipitable water vapor (PWV) was analyzed for typhoon Ewiniar which had made landfall in the Korean peninsula in 2006. To make a contour map of PWV, zenith total delay (ZTD) was calculated using about 60 GPS permanent stations in Korea, and the pressure and temperature data of nearby AWS stations were interpolated and applied to the equation for calculating the PWV. While Typhoon Ewiniar was migrating north from the southern coast to the eastern coast of Korea, the PWV migrated showing a spatial distribution similar to that of rainfall. Also, the fluctuating pattern of the normalized PWV was analyzed, and the moving speed of the PWV was estimated using the delay time of the increase/decrease pattern in the eight-test stations. The result indicated that the moving speed of the PWV was about 35 km/h, which was similar to the average moving speed of the typhoon (38.9 km/h).

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2798-2803
• /
• 2008

The confined slot air jet impinging normally on a moving flat surface has been investigated numerically by using commercial CFD code Ansys CFX-V11. Turbulent flows are modeled using k-w turbulence model. Two-dimensional turbulent flow is considered. Calculations were conducted for a nozzle-to-plate spacing of eight slot nozzle width, at three Reynolds number(Re=4500, 6700 and 10,000) and four surface-to-velocity ratios i.e. 0, 0.25, 0.5 and 1. Results are compared against corresponding cases for heat transfer from a stationary plate. Local Nusselt number is calculated under constant wall temperature condition. The analysis reveals that the average Nusselt number increases considerably with the jet exit Reynolds number, but decrease with the plate velocity.

• 한국기계가공학회지
• /
• 제16권2호
• /
• pp.44-49
• /
• 2017

In this study, the cutting conditions of moving speed, number of main axial revolutions, etc. are changed for the chrome molybdenum steel (SCM415) material and carbide ball end mill tool to study the changes for processing intensity in the cutting process. The results that confirm the intensity of the measured value of the specimen for SCM415 display the intensity with an average 1.0667 HrC. After the fact cutter, it was able to confirm the average intensity of 8.3815 HrC. In addition, the intensity value after image processing may determine the average intensity survey value of 5.8690 HrC and the different intensity values with image processing after face cutting are shown for an average of ${\pm}2.5125HrC$. The different value of intensity with the specimen and image processing is confirmed for an average of 4.8024 HrC. The results of comparing the intensity following the number of main axial revolutions and moving speed show that the intensity is highest for 3,000 rpm and F200, and lowest for 4,000 rpm and F200.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2009년도 춘계학술대회 논문집
• /
• pp.681-688
• /
• 2009

This paper deals with a bearing faults localization technique based on holographic approach by visualizing sound radiated from the faults. The main idea stems from the phenomenon that bearing faults in a moving vehicle generate impulsive sound. To visualize fault signal from the moving vehicle, we can use the moving frame acoustic holography [H.-S. Kwon and Y.-H. Kim, "Moving frame technique for planar acoustic holography," J. Acoust. Soc. Am. 103(4), 1734-1741, 1998]. However, it is not easy to localize faults only by applying the method. This is because the microphone array measures noise (for example, noise from other parts of the vehicle and the wind noise) as well as the fault signal while the vehicle passes by the array. To reduce the effect of noise, we propose two ideas which utilize the characteristics of fault signal. The first one is to average holograms for several frequencies to reduce the random noise. The second one is to apply the partial field decomposition algorithm [K.-U. Nam, Y.-H. Kim, "A partial field decomposition algorithm and its examples for near-field acoustic holography," J. of Acoust. Soc. Am. 116(1), 172-185, 2004] to the moving source, which can separate the fault signal and noise. Basic theory of those methods is introduced and how they can be applied to localize bearing faults is demonstrated. Experimental results via a miniature vehicle showed how well the proposed method finds out the location of source in practice.

• 대한치과보철학회지
• /
• 제28권1호
• /
• pp.123-135
• /
• 1990

It would be of importance to determine the neutral Tone by a resultant axis of relation on relation to the mandible in understanding the biomechanics of the mandibular movement. In this study, the neutral zone at the habitual opening and closing mandibular movements is the shape of the paths described by a minimum moving point occured as an average center of the determined instantaneous centers of rotation. Twenty, aged $23{\sim}25$, male dental students without Temporomandibular disorders and with normal occlusion clinically were selected for the study. The habitual opening and closing mandibular movements were recorded by the Gnathorecouder and analyzed by the computer program of a planer rigid body model and the determined method of a minimum moving point. The results obtained from this study were as follows. 1. The minimum moving points were placed in the body of the mandible except two subjects. 2. The mean of maximum displacements of a minimum moving point was $0.62{\pm}0.08cm$ on X-axis and $0.73{\pm}0.16cm$ on y-axis. 3. The mean of maximum displacements of a minimum moving point was $3.39{\pm}0.62cm$ 4. The position and shape of the neutral zone were determined by the position, displacements, and moving distances of a minimum moving point.

• 한국인터넷방송통신학회논문지
• /
• 제17권3호
• /
• pp.115-120
• /
• 2017

생체의 움직임을 판별을 예측하는 기술은 흐름판별율과 스트림판별율로 변화의 형태를 구성하여 진행한다. 떨림의 움직이는 형태는 판별율의 조건에 따라 움직임의 유동시스템으로 구성한다. 흐름판별율은 생체 내 물질에서 특별한 부위의 신호를 대상으로 생체의 움직임을 정의하고 그 주변에 형태에 따라 흐름을 판별하여 떨림을 비교하여 신호값으로 선정한다. 스트림판별율은 스트림상태의 기준값을 설정하고 측정된 값과 비교하여 신호값으로 선정한다. 대상조건에 따라 판별은 특정부위의 상-아래-주변-중앙을 대상으로 최대치와 최소치 및 평균값으로 변수를 측정하였다. 떨림의 변화에 따라 상 $(-0.817){\pm}0.15$, 주변 $(-2.53){\pm}(-0.11)$, 아래 $(-0.29){\pm}0.03$, 중앙 $(-0.09){\pm}(-0.01)$ 의 최대치-최소치-평균값이 나타났다. 형태의 변화에 따른 현상을 통하여 생체의 움직임의 범위가 어떠한 형태의 유동현상을 갖고 있는지 예측할 수 있고, 특정부위의 상-아래-주변-중앙의 움직임으로 데이터를 구성하면 앞으로 특정부위의 여러 변화를 주었을 때 신체의 다양한 변화를 판별하는 예측기술이 진행될 것으로 판단된다.