• Journal of Multimedia Information System
• /
• v.7 no.3
• /
• pp.231-238
• /
• 2020

This work presents a fully analog baseline wander tracking and removal circuitry using high-pass filter (HPF) based R-peak detection and quadratic interpolation that does not require digital post processing, thus suitable for compact and low power long-term ECG monitoring devices. The proposed method can effectively track and remove baseline wander in ECG waveforms corrupted by various motion artifacts, whereas minimizing the loss of essential features including the QRS-Complex. The key component for tracking the baseline wander is down sampling the moving average of the corrupted ECG waveform followed by quadratic interpolation, where the R-peak samples that distort the baseline tracking are excluded from the moving average by using a HPF based approach. The proposed circuit is designed using CMOS 0.18-㎛ technology (1.8V supply) with power consumption of 19.1 ㎼ and estimated area of 15.5 ㎟ using a 4^th order HPF and quadratic interpolation. Results show SNR improvement of 10 dB after removing the baseline wander from the corrupted ECG waveform.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.43 no.10 s.352
• /
• pp.60-68
• /
• 2006

OFDM(Orthogonal Frequency Division Multiplexing) is widely used in wideband wireless communication systems due to its excellentperformance. One of the most important operations in the OFDM receivers is preamble detection. This paper presents a differential detection method with moving average filter, which is similar to extended differential detection, and a filter determination method to achieve the best performance invarious environments. The proposed method show that the optimal filter size decreases as the delay spread increases and as the signal-to-noise ratio increases.

• Journal of the Korean Data and Information Science Society
• /
• v.21 no.3
• /
• pp.503-511
• /
• 2010

The goal of this paper is to suggest an algorithm to get the number of student on the elementary, meddle and high-school for the forecasting of the numbers of student by the moving average method using a proportional expression. Comparing with the results of Korean education statistical system 2005, 2006, and 2007, the results of this paper are better than those of the Korean education statistical system.

• Journal of Korea Society of Industrial Information Systems
• /
• v.17 no.2
• /
• pp.73-80
• /
• 2012

It has been highly required to develope an automatic metal surface inspection system, specifically using image processing techniques, which can replace the visual inspection method in the steel industry. In this paper, we propose a precisional surface measurement system using the moving average image processing technique. When the surface patterns which are generated in the rolling process of metal plates are recognized as defects, the proposed system can measure the actual number of defects. It has been proved that our system shows better results than the conventional FFT method.

• The Journal of Society for e-Business Studies
• /
• v.9 no.2
• /
• pp.17-31
• /
• 2004

It is very important that sellers provide reasonable reserve prices for auction items in internet auction systems. Recently, an agent has been proposed to generate reserve prices automatically based on the case similarity of information retrieval theory. However, one of its drawbacks is that the recent trend of auction prices is not reflected in the generated reserve prices, because it suggests the bid price of the most similar item from the past auction data. In this paper, in order to overcome the problem, we propose a new method that generates reserve prices based on the moving average of time series analysis, in which more weight is provided to the recent bid prices. Through performance experiments, we show that the successful bid rate can be increased by preventing sellers from making unreasonable reserve prices.

• Journal of Korean Physical Therapy Science
• /
• v.17 no.3_4
• /
• pp.51-58
• /
• 2010

Purpose: The purpose of this study was to examine changes of postural sway between the normal group and treatment group of same people through COP movements. Methods: Fifty men with no history of sensory, neurological and orthopedic disorders were participated in this study. Participants were tested on single limb balance during 30 seconds on EMED system with bared foot. Each of them performed two methods and 5 trials totally each method: (1) non-treated group (2) treated group(with big toe flexion limitation). Data on the moving length, average velocity, instantaneous maximum velocity, mediolateral(x axis) maximum velocity, and anteroposterior(y axis) maximum velocity of COP were measured in single limb standing position. Results: The moving length and average velocity of COP were significant difference between normal and treatment group(p<0.05). On correlation of parameters, the faster average velocity of COP, the higher moving length, instantaneous maximum velocity, mediolateral maximum velocity, and anteroposterior maximum velocity of COP increase. The more Instantaneous maximum velocity of COP, the faster is anteroposterior maximum velocity of COP. Conclusions: Limitation of big toe flexors function affected single limb balance of the normal.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.6C
• /
• pp.523-531
• /
• 2005

We derive decision regions of the maximum likelihood(ML) and suboptimum ML(S-ML) detectors in the first order moving average(FOMA) of an impulsive process. The ML and S-ML detectors are compared in terms of the bit-error-rate in the antipodal signaling system. Numerical results show that the S-ML detector, despite its reduced complexity and simpler structure, exhibits practically the same performance as the optimum ML detector. It is also shown that the performance gap between detectors for FOMA and independent and identically distributed noise becomes larger as the degree of noise impulsiveness increases.

• Journal of the Korea Society of Computer and Information
• /
• v.22 no.11
• /
• pp.17-23
• /
• 2017

In this paper, we implemented a respiration measurement system consisting of piezoelectric sensor, respiration signal processing device, and a viewer on a notebook. We tried an experiment for measuring respiration and detecting sleep apnea syndrome when a subject lay on a bed. We applied the respiration measurement algorithm to sensor data obtained from four subjects. In order to get a good graph shape, data manipulation methods such as moving averages and maximum values were applied. The window size for moving average was chosen as N=70, and the threshold value for each subject was customized. In this case, the proposed system showed 96.0% accuracy. When the maximum value among 90 data was applied instead of moving average, our system achieved 95.1% accuracy. In an experiment for detecting sleep apnea syndrome, the system showed that sleep apnea occurred correctly and calculated the average interval of sleep apnea. While infants or the elderly as well as patients with sleep apnea syndrome are lying down on a bed, our results are also expected to be able to cope with some accidental emergency situation by observing their respiration and detecting sleep apnea.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.7
• /
• pp.3470-3493
• /
• 2019

IEEE 802.11s-based infrastructure Wireless Mesh Networks (iWMNs) are envisaged as a promising solution to provide ubiquitous wireless Internet access. The limited network capacity is a problem mainly caused by the medium contention between mesh users and the mesh access points (MAPs), which gets worst when the mesh clients employ the Transmission Control Protocol (TCP). To mitigate this problem, we use wireless network coding (WNC) in the MAPs. The aim of this proposal is to take advantage of the network topology around the MAPs, to alleviate the contention and maximize the use of the network capacity. We evaluate WNC when is used in MAPs. We model the formation of coding opportunities and, using computer simulations, we evaluate the formation of such coding opportunities. The results show that as the users density grows, the coding opportunities increase up to 70%; however, at the same time, the coding delay increments significantly. In order to reduce such delay, we propose to adaptively adjust the time that a packet can wait to catch a coding opportunity in an MAP. We assess the performance of moving-average estimation methods to forecast this adaptive sojourn time. We show that using moving-average estimation methods can significantly decrease the coding delay since they consider the traffic density conditions.

• The Korean Journal of Applied Statistics
• /
• v.36 no.6
• /
• pp.573-589
• /
• 2023

In a piecewise linear trend model, the change points coincide with the mean change points of the first differenced time series. Therefore, by detecting the mean change points of the first differenced time series, one can estimate the change points of the piecewise linear trend model. In this paper, based on this fact, a method is proposed for detecting change points of the piecewise linear trend model using the simple moving average of the first differenced time series rather than estimates of the slope or residuals. Our Monte Carlo simulation experiments show that the proposed method performs well in estimating the number of change points not only when the error terms in the piecewise linear trend model are independent but also when they are serially correlated.