• Journal of the Korean Society of Radiology
• /
• v.14 no.5
• /
• pp.597-602
• /
• 2020

The study was conducted to improve the efficiency of the test and to reduce the exposure dose of patients and operators by analyzing the difference in the moving speed of Lipiodol according to the temperature during lymphography. The device for injecting Lipiodol at a constant pressure was self-made, and after inserting Lipiodol into the Connecting Tube, the moving speed of the contrast agent was photographed at temperatures of 26℃, 36℃, and 46℃ using a heat transfer device. Lipiodol movement time from the Support Catheter to 20cm was measured and analyzed, and statistical significance was confirmed. In the 46℃ environment, the average moving time was 11 seconds, at 36℃ the average was 13 seconds, and at 26℃ the average was 17 seconds. Lipiodol showed a significant difference in moving time with increasing temperature (p<.001), and it was confirmed that the higher the temperature, the faster the moving speed. In the case of lymphangiography, when heated to a certain temperature (46 degrees) rather than injecting Lipiodol at room temperature, the injection speed can be increased and the speed of movement in the lymphatic vessel can be improved.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.10
• /
• pp.2380-2388
• /
• 2015

A hardware implementation of MOD(moving object detection) algorithm using EGML(effective Gaussian mixture learning)- based background subtraction to detect moving objects in video is described. Some approximations of EGML calculations are applied to reduce hardware complexity, and pipelining technique is adopted to improve operating speed. The MOD processor designed in Verilog-HDL has been verified by FPGA-in-the-loop verification using MATLAB/Simulink. The MOD processor has 2,218 slices on the Virtex5-XC5VSX95T FPGA device and its throughput is 102 MSamples/s at 102 MHz clock frequency. Evaluation results of the MOD processor for 12 images in the IEEE CDW-2012 dataset show that the average recall value is 0.7631, the average precision value is 0.7778 and the average F-measure value is 0.7535.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37 no.4B
• /
• pp.309-316
• /
• 2012

The compensation algorithm for localization using the least-squires method in NLOS(Non Line of Sight) environment is suggested and the performance of the algorithm is analyzed in this paper. In order to improve the localization correction rate of the moving node, 1) the distance value of the moving node that is moving as an constant speed is measured by SDS-TWR(Symmetric Double-Sided Two-Way Ranging); 2) the location of the moving node is measured using the triangulation scheme; 3) the location of the moving node measured in 2) is compensated using the least-squares method. By the experiments in NLOS environment, it is confirmed that the average localization error rates are measured to ${\pm}1m$, ${\pm}0.2m$ and ${\pm}0.1m$ by the triangulation scheme, the Kalman filter and the least-squires method respectively. As a result, we can see that the localization error rate of the suggested algorithm is higher than that of the triangulation as average 86.0% and the Kalman filter as average 16.0% respectively.

• Management & Information Systems Review
• /
• v.37 no.1
• /
• pp.41-53
• /
• 2018

This study validates the trading rules based market anomalies and technical analysis in the Korean stock market. For the analysis, we built decile portfolios on the basis of corporate characteristics factors that clearly demonstrate specific patterns of stock returns including the firm size, book-to-market equity, and accruals. This portfolio was used to develop a portfolio based on the moving average trading strategy which was used for popular technical analysis tools, and then that was evaluated using the Sharpe ratio. We also created a zero-cost portfolio to identify the profitability and success rate of the moving average trading strategy. We lastly sought to ensure a more robust evaluation by calculating the Sortino ratio of the portfolio based on the moving average trading strategy with various lags. Key findings from this validation are as follows. First, a smaller firm size, a higher book-to-market equity, and lower accruals led to larger average returns. Second, the risk-adjusted performance of the moving average trading strategy was the highest in terms of the firm size, followed by book-to-market equity and accruals. Third, the returns of the zero-cost portfolios all had a positive value, with its overall success rate hovering over 68.8%, demonstrating the successfulness of the moving average trading strategy. Fourth, various evaluations revealed the economic usefulness of our trading strategy that used market anomalies and technical analysis.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.34 no.4
• /
• pp.91-112
• /
• 2009

The bullwhip effect means the phenomenon of increasing demand variation as moving UP to the upstream in the supply chain. Therefore, it is recognized that the bullwhip effect is problematic for effective supply chain operations. In this paper, we exactly quantifies the bullwhip effect for the case of stochastic lead time and seasonal demand in two-echelon supply chain where retailer employs a base-stock policy considering SARMA demand processes and stochastic lead time. We also investigate the behavior of the proposed measurement for the bullwhip effect with autoregressive and moving average coefficient, stochastic lead time, and seasonal factor.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2013.10a
• /
• pp.214-215
• /
• 2013

The main criteria for objective measure of the level of transportation service is travel time and delay time. In this paper, the level of service is measured by using moving vehicles method. Through this, we get the hourly traffic volume, the average travel time, space average speed, etc. In addition, we get the density of traffic.

• Industrial Engineering and Management Systems
• /
• v.4 no.1
• /
• pp.75-81
• /
• 2005

Borror et al. discussed the EWMA(Exponentially Weighted Moving Average) chart to monitor the count of defects which follows the Poisson distribution, referred to the $EWMA_c$ chart, as an alternative Shewhart c chart. In the $EWMA_c$ chart, the Markov chain approach is used to calculate the ARL (Average Run Length). On the other hand, in order to monitor the process fraction defectives P in high-yield processes, Xie et al. presented the CCC(Cumulative Count of Conforming)-r chart of which quality characteristic is the cumulative count of conforming item inspected until observing $r({\geq}2)$ nonconforming items. Furthermore, Ohta and Kusukawa presented the $CS(Confirmation Sample)_{CCC-r}$ chart as an alternative of the CCC-r chart. As a more superior chart in high-yield processes, in this paper we present an $EWMA_{CCC-r}$ chart to detect more sensitively small or moderate shifts in P than the $CS_{CCC-r}$ chart. The proposed $EWMA_{CCC-r}$ chart can be constructed by applying the designing method of the $EWMA_C$ chart to the CCC-r chart. ANOS(Average Number of Observations to Signal) of the proposed chart is compared with that of the $CS_{CCC-r}$ chart through computer simulation. It is demonstrated from numerical examples that the performance of proposed chart is more superior to the $CS_{CCC-r}$ chart.

• Convergence Security Journal
• /
• v.8 no.3
• /
• pp.33-39
• /
• 2008

Software failure time presented in the literature exhibit either constant, monotonic increasing or monotonic decreasing. For data analysis of software reliability model, data scale tools of trend analysis are developed. The methods of trend analysis are arithmetic mean test and Laplace trend test. Trend analysis only offer information of outline content. In this paper, we discuss exponentially weighted moving average chart, in measuring failure time. In control, exponentially weighted moving average chart's uses are efficiency case of analysis with knowing information, Using real software failure time, we are proposed to use exponentially weighted moving average chart and comparative analysis of software failure time.

• Journal of Navigation and Port Research
• /
• v.28 no.6
• /
• pp.509-515
• /
• 2004

The aim of this paper is to forecast passenger numbers and freight volumes in 2005 and it is proposed optimal tonnage of passenger ship. The forecasting of passenger numbers and freight volumes is important problem in order to determine optimal tonnage of passenger ship, port plan and development. In this paper, the forecasting of passenger numbers and freight volumes are performed by the method of neural network using back-propagation learning algorithm. And this paper compares the forecasting performance of neural networks with moving average method and exponential smooth method As the result of analysis. The forecasting of passenger numbers and freight volumes is that the neural networks performed better than moving average method and exponential smoothing method on the basis of MSE(mean square error) and MAE(mean absolute error).

• Communications for Statistical Applications and Methods
• /
• v.17 no.4
• /
• pp.507-513
• /
• 2010

Let {$X_i,-{\infty}$ < 1 < $\infty$} be a doubly infinite sequence of identically distributed and negatively associated random variables with mean zero and finite variance and {$a_i,\;-{\infty}$ < i < ${\infty}$} be an absolutely summable sequence of real numbers. Define a moving average process as $Y_n={\sum}_{i=-\infty}^{\infty}a_{i+n}X_i$, n $\geq$ 1 and $S_n=Y_1+{\cdots}+Y_n$. In this paper we prove that E|$X_1$|$^rh$($|X_1|^p$) < $\infty$ implies ${\sum}_{n=1}^{\infty}n^{r/p-2-q/p}h(n)E{max_{1{\leq}k{\leq}n}|S_k|-{\epsilon}n^{1/p}}{_+^q}<{\infty}$ and ${\sum}_{n=1}^{\infty}n^{r/p-2}h(n)E{sup_{k{\leq}n}|k^{-1/p}S_k|-{\epsilon}}{_+^q}<{\infty}$ for all ${\epsilon}$ > 0 and all q > 0, where h(x) > 0 (x > 0) is a slowly varying function, 1 ${\leq}$ p < 2 and r > 1 + p/2.