• KIPS Transactions on Computer and Communication Systems
• /
• v.1 no.3
• /
• pp.219-228
• /
• 2012

As the wireless Internet become more widely accessible, variety of Internet services can be used without limitation of location. However, existing mobility management methods such as MIP and PMIP of IETF requires the load of heavy protocol stack on the mobile nodes or the addition of components such as LMA and MAG. In this paper, we proposed the location management technique in the PMIPv6 and Fast Handover technique. according to the moving pattern of the node, the location management technique proposed in order to adjust the paging area dynamically. The Fast Handover technique applied MIH technology and it reduced the handover signal processing time between heterogeneous network. The location management cost in the environment which the node moves in order to evaluate this and handover delay time was calculate. The proposal technique was efficiently more evaluated than PMIPv6 with the smallest 29% and maximum 83%.

• The KSFM Journal of Fluid Machinery
• /
• v.10 no.1 s.40
• /
• pp.34-40
• /
• 2007

In this study, the characteristic of a vane pump of automotive power steering system is numerically analyzed. The vane pump changes the energy level of operation fluid by converting mechanical input power to hydraulic output. To simulate this mechanism, moving mesh technique is adopted. As a result, the flow rate and pressure are obtained by numerical analysis. The flow rate agrees well with the experimental data. Moreover, the variation and oscillation of the pressure around the rotating vane are observed. As a result of flow characteristics, The difference of pressure between both side of vane tip causes the back flow into the rotor. As the rotational velocity increases, the flow rate at the outlet and the pressure in the vane tip rises with higher amplitude of oscillation. In order to reducing the oscillation, the design of devices for decreasing the cross-area of the outlet part and returning the flow from the outlet to the inlet is required.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2006.05a
• /
• pp.486-489
• /
• 2006

This paper presents a newly proposed object-oriented finite element framework and its applications on dynamic analysis of plate girder bridge. The developed framework supports various types of finite elements, materials, constraints, loads, and solution methods. One major feature different from other object-oriented finite element programs is that static model and dynamic state can be easily read from or written to a file. In addition, the framework supports efficient DOF pattern handling for a node connecting elements with different DOF patterns, new multi-point constraint handling, and various scripting languages for easy use of the library. In order to show the applicability to dynamic analysis, dynamic moving load analysis on plate girder bridge is performed.

• Journal of Electrical Engineering and Technology
• /
• v.1 no.1
• /
• pp.92-97
• /
• 2006

This paper presents the characteristic analysis and the optimal design of a permanent magnetic actuator (PMA) for a vacuum circuit breaker (VCB) using a two-dimensional finite element analysis. The purpose of this research about a PMA is to minimize the breaking time and the volume of the permanent magnet within the limits of the holding force and maximum current in the coil. The conjugate gradient method is used as an optimization algorithm. The node moving technique is iteratively implemented until the design variables of the PMA are optimized. In this paper, the optimal design of a PMA is accomplished to improve the conventional design methods.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.465-468
• /
• 2003

In industry areas, a lot of factories and process plants need network for processing data acquired from field and for communicating between sensors or actuators or field controllers. Most of the industry networks are based on wired solutions. But, recently, a lot of factories and process plants are moving into wireless solutions since they have some advantages compared with wired one. In this paper we first review the characteristics of wired and wireless network technologies and introduce the new technique called wireless sensor network (WSN). And then we describe the wireless sensor node system designed by us for WSN which has the ability of small size, flexibility and low-power consumption and embedded into the Bar-code scanner to communicate each other. Finally, we conclude this paper by showing that wireless industry network can be constructed with wireless sensor network without large change of traditional wired topologies through experiment using wireless sensor nodes.

• Proceedings of the KIEE Conference
• /
• 2005.04a
• /
• pp.40-42
• /
• 2005

In this paper, thrust ripple is minimized using notch and slot-aperture width adjustment in a slotted PMLSM and then optimal design was achieved by using a neural network. This paper has used the moving model node technique to reduce the time and the effort for calculation according to changing design parameters. As the result, the detent force of optimal model is decreased from 9.44[N] to 0.97[N] greatly compare with it of basic model. The thrust is decreased 1.3[%] from 342.07[N] to 337.48[N] a little.

• Proceedings of the KIEE Conference
• /
• 2000.07b
• /
• pp.763-765
• /
• 2000

Detent force is produced in a permanent magnet linear machine. It is generally an undesired effect that contributes to the output ripple of machine, vibration and noise. This paper analyzes detent force in a Permanent Magnet Linear Synchronous Motor (PMLSM) by using various detent force minimization techniques. A two-dimensional Finite Element Method(FEM) is used to predict detent forces due to structural factors and non-linearity. And moving node technique for the drawing models is used to reduce modeling time and efforts.

• Journal of Korea Spatial Information System Society
• /
• v.8 no.2 s.17
• /
• pp.75-89
• /
• 2006

LBS (Location-Based Service) systems have become a serious subject for research and development since recent rapid advances in wireless communication technologies and position measurement technologies such as global positioning system. The architecture named the GALIS (Gracefully Aging Location Information System) has been suggested which is a cluster-based distributed computing system architecture to overcome performance losses and to efficiently handle a large volume of data, at least millions. The GALIS consists of SLDS and LLDS. The SLDS manages current location information of moving objects and the LLDS manages past location information of moving objects. In this thesis, we implement a monitoring technique for the GALIS prototype, to allow dynamic load balancing among multiple computing nodes by keeping track of the load of each node in real-time during the location data management and spatio-temporal query processing. We also propose a buffering technique which efficiently manages the query results having overlapped query regions to improve query processing performance of the GALIS. The proposed scheme reduces query processing time by eliminating unnecessary query execution on the overlapped regions with the previous queries.

• Journal of KIISE:Databases
• /
• v.30 no.3
• /
• pp.320-335
• /
• 2003

Location-Based Services(LBS) give rise to location-based queries of which results depend on the locations of moving objects. One of important applications of LBS is to examine tracks of continuously moving objects. Moving objects databases need to provide 3-dimensional indexing for efficiently processing range queries on the movement of continuously changing positions. An extension of the 2-dimensional R-tree to include time dimension shows low space utilization and poor search performance, because of high overlap of index nodes and their dead space. To solve these problems, we propose a new R-tree based indexing technique, namely TR-tree. To increase storage utilization, we assign more entries to the past node by using the unbalanced splitting policy. If two nodes are highly overlapped, these nodes are forcibly merged. It is the forced merging policy that reduces the dead space and the overlap of nodes. Since big line segments can also affect the overlap of index nodes to be increased, big line segments should be clipped by the clipping policy when splitting overfull nodes. The TR-tree outperforms the 3DR-tree and TB-tree in all experiments. Particularly, the storage utilization of the TR-tree is higher than the R-tree and R*-tree.

• The KIPS Transactions:PartC
• /
• v.18C no.3
• /
• pp.167-178
• /
• 2011

As the growth of ubiquitous services, various types of ad hoc networks have emerged. In particular, wireless sensor networks (WSN) and mobile ad hoc networks (MANET) are widely known ad hoc networks, but there are also other kinds of wireless ad hoc networks in which the characteristics of the aforementioned two network types are mixed together. This paper proposes a variant of the Low Energy Adaptive Cluster Hierarchy (LEACH) routing protocol modified to be suitable in such a combined network environment. That is, the proposed routing protocol provides node detection and route discovery/maintenance in a network with a large number of mobile sensor nodes, while preserving node mobility, network connectivity, and energy efficiency. The proposed routing protocol is implemented with a multi-hop multi-path algorithm, a topology reconfiguration technique using node movement estimation and vibration sensors, and an efficient path selection and data transmission technique for a great many moving nodes. In the experiments, the performance of the proposed protocol is demonstrated by comparing it to the conventional LEACH protocol.