• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2017.04a
• /
• pp.157-157
• /
• 2017

To minimize the damage by wild birds and acquire the benefits such as protection against weeds and maintenance of water content in soil, the mulching black color vinyl after seeding should be carried out. Non-contact and non-destructive methods that can continuously determine the locations are necessary. In this study, a crop position detection method was studied that uses infrared thermal image sensor to determine the cotyledon position under vinyl mulch. The moving system for acquiring image arrays has been developed for continuously detecting crop locations under plastic mulching on the field. A sliding mechanical device was developed to move the sensor, which were arranged in the form of a linear array, perpendicular to the array using a micro-controller integrated with a stepping motor. The experiments were conducted while moving 4.00 cm/s speed of the IR sensor by the rotational speed of the stepping motor based on a digital pulse width modulation signal from the micro-controller. The acquired images were calibrated with the spatial image correlation. The collected data were processed using moving averaging on interpolation to determine the frame where the variance was the smallest in resolution units of 1.02 cm. Non-linear integral interpolation was one of method for analyzing the frequency using the normalization image and then arbitrarily increasing the limited data value of $16{\times}4pixels$ in one frame. It was a method to relatively reduce the size of overlapping pixels by arbitrarily increasing the limited data value. The splitted frames into 0.1 units instead of 1 pixel can propose more than 10 times more accurate and original method than the existing correction method. The non-integral calibration method was conducted by applying the subdivision method to the pixels to find the optimal correction resolution based on the first reversed frequency. In order to find a correct resolution, the expected location of the first crop was indicated on near pixel 4 in the inversion frequency. For the most optimized resolution, the pixel was divided by 0.4 pixel instead of one pixel to find out where the lowest frequency exists.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.22 no.2
• /
• pp.198-204
• /
• 2012

Tracking and recognition of robots are required for the cooperation task of robots in various environments. In the paper, a tracking control system of moving robot using stereo image processing, code-book model and fuzzy controller is proposed. First, foreground and background images are separated by using code-book model method. A candidate region is selected based on the color information in the separated foreground image and real distance of the robot is estimated from matching process of depth image that is acquired through stereo image processing. The open and close processing of image are applied and labeling according to the size of mobile robot is used to recognize the moving robot effectively. A fuzzy tracking controller using distance information and mobile information by stereo image processing is designed for effective tracking according to the movement velocity of the target robot. The proposed fuzzy tracking control method is verified through tracking experiments of mobile robots with stereo camera.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.25-28
• /
• 2001

In this paper we implement moving picture transfer system using bluetooth Development Kit (DK). To reduce the size of the image data, we use M-JPEG compression. We use bluetooth Synchronous Connection-Oriented (SCO) link to transfer voice data. Server receive image data from camera and compress the image data in M-JPEG format, and then transmit the image data to client using bluetooth Asynchronous connection-less (ACL) link. Client receive image data from bluetooth ACL link and decode the compressed image and then display the image to screen. Sever and Client can transmit and receive voice data simultaneously using bluetooth SCO link. In this paper bluetooth HCI commands and events generated by host controller to return the results of HCI commands are explained and the flow of bluetooth connection procedure is presented.

• International Journal of Precision Engineering and Manufacturing
• /
• v.5 no.1
• /
• pp.27-35
• /
• 2004

In the field of machine vision using a single camera mounted on a mobile robot, although the detection and tracking of moving objects from a moving observer, is complex and computationally demanding task. In this paper, we propose a new scheme for a mobile robot to track and capture a moving object using images of a camera. The system consists of the following modules: data acquisition, feature extraction and visual tracking, and trajectory generation. And a single camera is used as visual sensors to capture image sequences of a moving object. The moving object is assumed to be a point-object and projected onto an image plane to form a geometrical constraint equation that provides position data of the object based on the kinematics of the active camera. Uncertainties in the position estimation caused by the point-object assumption are compensated using the Kalman filter. To generate the shortest time trajectory to capture the moving object, the linear and angular velocities are estimated and utilized. The experimental results of tracking and capturing of the target object with the mobile robot are presented.

• Convergence Security Journal
• /
• v.2 no.1
• /
• pp.77-86
• /
• 2002

In this paper, we propose a segmentation algorithm that can reliably separate moving objects from noisy background in the image sequence received from a camera at the fixed position. Image segmentation is one of the most difficult process in image processing and an adoption in the change of environment must be considered for the increase in the accuracy of the image. The proposed algorithm consists of four process : generation of the difference image between the input image and the reference image, removes the background noise using the background nois modeling to a difference image histogram, then selects the candidate initial region using local maxima to the difference image, and gradually expanding the connected regions, region by region, using the shape information. The test results show that the proposed algorithm can detect moving objects like intruders very effectively in the noisy environment.

• The KIPS Transactions:PartB
• /
• v.8B no.5
• /
• pp.539-548
• /
• 2001

In this paper, we propose that fast tracking algorithm for moving object is separated from background, using partial boundary line information. After detecting boundary line from input image, we track moving object by using the algorithm which takes boundary line information as feature of moving object. we extract moving vector on the imput image which has environmental variation, using high-performance BMA, and we extract moving object on the basis of moving vector. Next, we extract boundary line on the moving object as an initial feature-vector generating step for the moving object. Among those boundary lines, we consider a part of the boundary line in every direction as feature vector. And then, as a step for the moving object, we extract moving vector from feature vector generated under the information of the boundary line of the moving object on the previous frame, and we perform tracking moving object from the current frame. As a result, we show that the proposed algorithm using feature vector generated by each directional boundary line is simple tracking operation cost compared with the previous active contour tracking algorithm that changes processing time by boundary line size of moving object. The simulation for proposed algorithm shows that BMA operation is reduced about 39% in real image and tracking error is less than 2 pixel when the size of feature vector is [$10{\times}5$] using the information of each direction boundary line. Also the proposed algorithm just needs 200 times of search operation bout processing cost is varies by the size of boundary line on the previous algorithm.

• Journal of the Korean Institute of Telematics and Electronics B
• /
• v.31B no.11
• /
• pp.63-77
• /
• 1994

This paper describes the real-time system which, through analyzing a sequence of images, can extract motional information on a moving object and can contol servo equipment to always locate the moving object at the center of an image frame. An image is a vast amount of two-dimensional signal, so it takes a lot of time to analyze the whole quantity of a given image. Especially, the time needed to load pixels from a memory to processor increase exponentially as the size of an image increases. To solve such a problem and track a moving object in real-time, this paper addresses how to selectively search the spatial and time domain. Based on the selective search of spatial and time domain, this paper suggests various types of techniques which are essential in implementing a real-time tracking system. That is, this paper describes how to detect an entrance of a moving object in the field of view of a camera and the direction of the entrance, how to determine the time interval of adjacent images, how to determine nonstationary areas formed by a moving object and calculated velocity and position information of a moving object based on the determined areas, how to control servo equipment to locate the moving object at the center of an image frame, and how to properly adjust time interval(${\Delta}$t) to track an object taking variable speed.

• Journal of the Korea Computer Industry Society
• /
• v.3 no.9
• /
• pp.1145-1156
• /
• 2002

A method to measure the speed and distance of moving object is proposed using the stereo vision system. One of the most important factors for measuring the speed and distance of moving object is the accuracy of object tracking. Accordingly, the background image algorithm is adopted to track the rapidly moving object and the local opening operator algorithm is used to remove the shadow and noise of object. The extraction efficiency of moving object is improved by using the adaptive threshold algorithm independent to variation of brightness. Since the left and right central points are compensated, the more exact speed and distance of object can be measured. Using the background image algorithm and local opening operator algorithm, the computational processes are reduced and it is possible to achieve the real-time processing of the speed and distance of moving object. The simulation results show that background image algorithm can track the moving object more rapidly than any other algorithm. The application of adaptive threshold algorithm improved the extraction efficiency of the target by reducing the candidate areas. Since the central point of the target is compensated by using the binocular parallax, the error of measurement for the speed and distance of moving object is reduced. The error rate of measurement for the distance from the stereo camera to moving object and for the speed of moving object are 2.68% and 3.32%, respectively.

• The KIPS Transactions:PartB
• /
• v.11B no.3
• /
• pp.267-274
• /
• 2004

In this paper, the interesting moving objects tracking algorithm using color information on Multi-Video camera is proposed Moving objects are detected by using difference image method and integral projection method to background image and objects image only with hue area, after converting RGB color coordination of image which is input from multi-video camera into HSI color coordination. Hue information of the detected moving area are normalized by 24 steps from 0$^{\circ}$ to 360$^{\circ}$ It is used for the feature parameters of the moving objects that three normalization levels with the highest distribution and distance among three normalization levels after obtaining a hue distribution chart of the normalized moving objects. Moving objects identity among four cameras is distinguished with distribution of three normalization levels and distance among three normalization levels, and then the moving objects are tracked and surveilled. To examine propriety of the proposed method, four cameras are set up indoor difference places, humans are targeted for moving objects. As surveillance results of the interesting human, hue distribution chart variation of the detected Interesting human at each camera in under 10%, and it is confirmed that the interesting human is tracked and surveilled by using feature parameters at four cameras, automatically.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.8 no.6
• /
• pp.141-146
• /
• 2008

Recently, it is studying to provide to users through internet in the SensorWeb of OGC(Open Geospatial Consortium) saving and maintaining data and image information gathered from sensor network. It is necessary to study about data convergence as binding audio and video for delivering the sensing data and image information to users with real-time system. In this article, it suggests how to convergence sensing data and moving picture collected from the sensor network using index. This program indicates both of them that collected sensing data and information identified of moving picture in the integration index and based on this program provides sensing data moving picture at the same time referencing integration index, if the user asks. To verify suggested method designing real-time multimedia service structure using sensor network and image installation and implementing Ubiquitous realtime multimedia system integrating moving picture and sensing data based on index. As a result of this program, it is confirmed providing real-time multimedia service to request information of application service using integration index collected image and sensing data from wireless sensor network and image installation suggested data convergence method.