• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제10권9호
• /
• pp.4419-4441
• /
• 2016

A cause of vehicle accidents is the reduced visibility due to bad weather conditions such as fog. Therefore, an onboard vision system should take visibility detection into account. In this paper, we propose a simple and effective approach for measuring the visibility distance using a single camera placed onboard a moving vehicle. The proposed algorithm is controlled by a few parameters and mainly includes camera parameter estimation, region of interest (ROI) estimation and visibility computation. Thanks to the ROI extraction, the position of the inflection point may be measured in practice. Thus, combined with the estimated camera parameters, the visibility distance of the input foggy image can be computed with a single camera and just the presence of road and sky in the scene. To assess the accuracy of the proposed approach, a reference target based visibility detection method is also introduced. The comparative study and quantitative evaluation show that the proposed method can obtain good visibility detection results with relatively fast speed.

• 한국인터넷방송통신학회논문지
• /
• 제10권2호
• /
• pp.77-83
• /
• 2010

차량 애드 혹 망 (Vehicular Ad Hoc Networks: VANETs)은 일반적으로 이동성이 높은 차량 노드들로 구성되어 매우 짧은 시간 망 위상이 지속되므로 불안정한 통신 링크를 갖는 자기 조직화 P2P 망이다. VANETs은 고정된 인프라 구조나 중앙 통제 라우팅 장비 없이 자동적으로 망구조를 구성하고, 차량 노드들은 시간에 따라 고속으로 이동하며 망에 결합하거나 이탈하는 개방 망이므로 중앙 집중식 제어 없이 누구나 접속을 허용하기 때문에 망상에 해롭고 비정상 행위 노드들에 대한 침입에 매우 취약하다. 본 논문에서는 이러한 VANETs에서의 노드들의 활동에 대한 비정상 행위를 효율적으로 식별할 수 있는 러프집합기반 비정상 행위 탐지방법을 제안하고, 그 성능을 모의실험을 통해 임계 허용 오차에 대한 비정상 행위 탐지율과 거짓 경고율로 평가하였다.

• 한국소음진동공학회논문집
• /
• 제13권6호
• /
• pp.474-483
• /
• 2003

In this study, the dynamic characteristics of a catenary system and pantograph supplying electrical power to high-speed trains are investigated. One of the most important issues accompanied by increasing the speed of high-speed rail is stabilization of current collection. To stabilize current collection, it is necessary the contact force between the catenary and the pantograph to be kept continuous without loss of contact. The analytical model of a catenary and a pantograph is constructed to simulate the behavior of an actual system. The analysis of the catenary based on the Finite Element Method (FEM) is performed to develop a catenary model suitable for high speed operation. The reliability of the models is verified by the comparison of the excitation test with Fast Fourier Transform (FFT) data of the actual system. The static deflection of the catenary, stiffness variation in contact lines, dynamic response of the catenary undergoing constant moving load, contact force, and each state of the pantograph model were calculated. It is confirmed that a catenary and pantograph model are necessary for studying the dynamic behavior of the pantograph system.

• 한국항해항만학회지
• /
• 제41권4호
• /
• pp.189-194
• /
• 2017

이동형해상감시레이더는 해안을 따라 이동하며, 해역을 감시하는 기능을 수행한다. 초기 레이더의 방향은 차량의 선수방향으로 정렬되어 있기 때문에 전개지 이동 후 신속하게 표적의 방위각을 획득하기 위해서는 변경된 차량의 선수방향을 아는 것이 중요하다. 차량의 선수방위각은 자이로 컴퍼스, GPS 컴퍼스 혹은 전자 컴퍼스로 획득할 수 있다. 그 중에서 전자 컴퍼스는 가격이 저렴할 뿐만 아니라, 부피가 작고, 안정화 시간이 짧아서 빠른 기동성을 요구하는 이동형해상감시레이더에 적합하다. 하지만, 지자계 센서를 사용하다보니 주변 자장의 영향으로 오차가 발생될 수 있으며, 발생된 오차는 초기 위성의 자동추적을 어렵게 하고, 레이더의 탐지정확도를 떨어뜨린다. 따라서 본 논문에서는 이동형해상감시레이더 및 정지 위성간의 두 위치좌표로부터 측지학적 역 문제 해석을 통해 기준 방위각을 산출하고 이를 위성 안테나가 실제 지향한 방위각과 비교 산출하여 얻어진 보정값을 레이더에 반영하는 자동보정절차를 제안하고 제안된 방법을 실제 운용 중인 이동형해상감시레이더에 적용함으로써 운용가능성 및 편리성을 검증하였다.

• 전자공학회논문지SC
• /
• 제45권1호
• /
• pp.1-8
• /
• 2008

자유롭고 빠르게 이동할 수 있도록 도와주는 개인 이동 수단인 two-wheel balancing vehicle은 inverted pendulum 시스템의 원리를 이용한 것으로, 최근 들어 많은 연구가 이루어지고 있고 이를 이용한 제품이 실제 사용되고 있다. 본 논문에서는 일반적인 PID 제어이론을 이용한 two-wheel balancing vehicle에 대한 제어성능을 개선시키는 새로운 제어방식을 제안한다. 제안한 방식은 퍼지 PD+I 제어방식으로 향상된 PID 제어의 일종으로 2개의 입력과 1개의 출력을 가진 퍼지시스템에 적분 신호를 더함으로써 출력신호를 만든다. 퍼지시스템의 비선형성은 시간공정에서 비례신호와 미분신호의 가중치를 변화함으로써 최적의 출력제어신호를 만들어낸다. 제안한 퍼지 PD+I 제어방식의 유용성을 알아보기 위해 two-wheel balancing mobile robot에 대해 시뮬레이션과 실험의 결과를 통해, 제안한 퍼지 PD+I 제어방식이 일반적인 PID 방식보다 우수한 성능을 가지고 있음을 알 수가 있다.

• 한국지진공학회:학술대회논문집
• /
• 한국지진공학회 2000년도 춘계 학술발표회 논문집 Proceedings of EESK Conference-Spring
• /
• pp.218-225
• /
• 2000

This paper presents intermediate results of an on-going research for identification of the modal and the stiffness parameters of a bridge based on the ambient vibration data caused by the traffic loadings. The main algorithms consist of the random decrement method incorporating band-pass filters for estimation of the free vibration signals the cross spectral density method for identification of the modal parameters and the neural networks technique for estimation of the element-level stiffness changes. An experimental study is carried out on a scaled bridge model with a composite section subjected to various moving vehicle loadings. Vertical accelerations are measured at several locations on the girder. The estimated frequencies and mode shapes are found to be well-compared with those obtained from the impact tests. The estimated stiffness changes using the neural networks are found to be very good for the case with the simulated data. However the accuracy is found to be not quite satisfactory for the case with the experimental data particularly for the small value of the stiffness changes.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2004년도 춘계학술대회논문집
• /
• pp.410-415
• /
• 2004

The oscillation of the fluid caused by external forces is call ed sloshing, which occurs in moving vehicles with contained liquid masses, such as trucks, railroad cars, aircraft, and liquid rocket. This sloshing effect could be a severe problem in vehicle stability and control. In this study, the optimization design technique for reduction of the sloshing using evolutionary method is suggested. Two evolutionary methods are employed, respectively the artificial neural network(ANN) and genetic algorithm. An artificial neural network is used for the analysis of sloshing and genetic algorithm is adopted as optimization algorithm. As a result of optimization design, the optimized size and location of the baffle is presented

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2002년도 하계학술대회 논문집 D
• /
• pp.2337-2340
• /
• 2002

This paper presents the method of AGV(Automatic guided vehicle)'s moving environment(plane, corner, edge) recognition using SONAR sensor configuration. As for the SONAR sensor, the Crosstalk effect has been generally considered as an inevitable noisy phenomenon in the indoor environment. However, this effect can be used as a clue for classifying and localizing targets in the indoor environment if those can be controlled and used well. EERUF(error eliminate rapid ultrasonic firing) is a method for firing multiple ultrasonic sensors in mobile robot application and multi-echo mode of POLARIOD Device can reduce the Crosstalk effect. Here, Crosstalk effect was reduced using EERUF and applied to the AGV with a simple wall-following algorithm in the indoor environment. This method was tesed by a typical AGV with multi SONAR sensors in the laboratory environment.

• 전기학회논문지
• /
• 제60권11호
• /
• pp.2152-2156
• /
• 2011

In this paper, we propose the novel behavior control algorithm by using the efficient searching method based on the characteristic of the swarm robots in unknown space. The proposed method consists of identifying the position and moving state of a robot by the dynamic modelling of a wheel drive vehicle, and planing behavior control rules of the swarm robots based on the sensor range zone. The cooperative search for unknown space is carried out by the proposed behavior control. Finally, some experiments show the effectiveness and the feasibility of the proposed method.

• 한국컴퓨터정보학회논문지
• /
• 제24권3호
• /
• pp.19-27
• /
• 2019

This paper proposes a new method using multi-layer overlapped windows to improve the performance of YOLO network which is vulnerable to detect small dense objects. In particular, the proposed method uses the YOLO Network based on the multi-layer overlapped windows to track small dense vehicles that approach from long distances. The method improves the detection performance for location and size of small vehicles. It allows crossing area of two multi-layer overlapped windows to track moving vehicles from a long distance to a short distance. And the YOLO network is optimized so that GPU computation time due to multi-layer overlapped windows should be reduced. The superiority of the proposed algorithm has been proved through various experiments using captured images from road surveillance cameras.