• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2015년도 춘계학술대회
• /
• pp.571-575
• /
• 2015

실시간으로 입력되는 영상으로부터 이동객체의 움직임 특징을 분석하는 시간적 히스토그램 기반의 행동패턴분석 알고리즘을 제안한다. 이동객체의 추적 및 분석을 위해 배경과 이동객체를 분리하는 배경학습을 행한다. 배경학습으로 추출된 이동객체는 무게중심 및 좌표연관성을 이용하여 객체를 식별한 후 객체별 추적을 행한다. 추적된 각 객체의 시작프레임, 종료프레임, 좌표정보, 크기정보를 연결리스트에 저장하여 관리한다. 시간적 히스토그램은 x, y좌표와 시간을 이용해 움직임 특징 패턴을 정의한 것으로 각 객체의 좌표정보와 비교하여 움직임특징 및 행동패턴을 파악한다. 시간적 히스토그램 기반 행동패턴분석시스템은 자체 수집한 데모영상에 대한 실험을 통해 초당 45~50 fps의 높은 처리속도를 유지하며 95%이상의 높은 추적율을 확인하였다.

• 한국산학기술학회논문지
• /
• 제5권3호
• /
• pp.218-222
• /
• 2004

본 연구에서는 분리형 이동코어 방식의 스탬퍼 금형을 개발하였고, 사출성형품 품질에 영향을 주는 인자 중에 이동코어 표면 가열 방식이 미세구조를 갖는 성형품 전사성에 미치는 영향에 대해 알아보았다. 이동코어 표면 가열방식은 이동코어를 가열하지 않는 일반사출방식, 할로겐램프를 이용한 복사형 가열방식과 기체화염을 이용해 가열하는 MmSH 방식을 사용했다. COC, PMMA 두 종류의 열가소성 수지를 사용하여 성형품을 제작한 결과, 이동코어 표면온도가 가장 높은 MmSH 방식에서 나노패턴 전사성이 가장 우수했고, 일반사출성형 방식으로 제작한 성형품에서 전사성이 가장 저조했다.

• 대한가정학회지
• /
• 제20권3호
• /
• pp.1-8
• /
• 1982

In this study, we attempted to make an original pattern of clothing for an abnormal type of figure, especially for the type of kyphosis. We measured the curvature of the spine of a woman with kyphosis with a Martin measuring instrument and a silhouetter in the following ways. First, we counted the rate of shrinkage of the standard lines drawn on the surface of the body according as the body moved. Secondly, placing the front and back darts, the front and back shoulder darts and the side darts according to“Munhwa”pattern, we made cubic cuttings of four moving postures as well as the standing one. Thirdly, we superposed the developed patterns of the standing and the moving postures, measuring the position change and the amount to the change of the darts, and compared them. The results are as follows: 1) In the developed pattern of a cubic cutting of the basic pattern and the standing posture, the neckhole became larger than that of the basic pattern, and the waist line was lowered than that of the basic pattern because the center back line was shortened due to the curved backbone.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 2017년도 춘계공동학술대회
• /
• pp.31-31
• /
• 2017

On farm evaluation for the control of airborne diseases like FMD and flu virus has been done in past but control of disease in process of transportation of livestock and manures is still needed. The objective of this study was to predict a common pattern of livestock vehicles movement. The analysis were done on GPS data, collected from drivers of livestock vehicles in Jeju Island, South Korea in year 2012 and 2013. The GPS data include the coordinates of moving vehicles according to time and dates, livestock farms and manure keeping sites. 2012 year data was added to ArcGIS and different tools were used for predicting common vehicle moving pattern. The common pattern of year 2012 were determined and considered as predicted common pattern for year 2013. To compare with actual pattern of year 2013 the same analysis was done to find the difference in 2012 and 2013 pattern. When the manure keeping sites and livestock farms were same in both years, as a result common pattern of 2012 and 2013 were similar but difference were found in patterns when the manure keeping sites and livestock farms were changed. In future for more accurate results and to predict the accurate pattern of vehicles movement, more dependent and independent variables will be required to make a suitable model for prediction.

• 한국정보과학회논문지:데이타베이스
• /
• 제29권5호
• /
• pp.335-346
• /
• 2002

위치 기반 서비스는 이동중인 사용자에게 위치와 관련된 정보를 제공한다. 최소한의 자원으로 사용자에게 유용한 정보를 개인화하여 제공하는 것은 위치 기반 서비스가 가져야 할 필수적인 기능이다. 이 기능은 데이타 마이닝을 통해 실현될 수 있다. 하지만 기존의 데이터 마이닝 연구는 시간 및 공간 속성을 동시에 고려하고 있지 않다. 따라서 시간에 따라 공간 위치 속성이 변경되는 특성을 갖는 위치 기반 서비스의 대상에는 적절하지 않다. 이 논문에서는 시간 및 공간 속성을 가지는 이동 객체의 위치 데이타로부터 유용한 시간 패턴을 탐사하기 위한 새로운 데이타 마이닝 기법을 제안하였다. 평면 상에서 좌표로 표현되는 이동 객체의 위치 정보를 일반화하기 위하여 contains와 같은 공간 연산을 사용하였다. 또한 이동 패턴 탐사 시 실제 유효한 시퀀스를 만들기 위해 객체의 위치 사이에 시간 제약조건을 적용하였다. 이렇게 생성된 이동 객체 위치의 시퀀스로부터 빈발 이동 시퀀스를 구하여 시간 패턴을 생성하였다. 제안한 기법은 기존과는 다른 시, 공간적 접근을 취함으로써 시간과 공간 의미가 중요시되는 위치 기반 서비스에 적합한 새로운 유형의 지식을 제공할 수 있다.

• 전자공학회논문지B
• /
• 제32B권5호
• /
• pp.777-787
• /
• 1995

This paper presents a new method for automatically calibrating robot link (Kinematic) parameters during the process of estimating motion parameters of a moving object. The motion estimation is performed based on stereo cameras mounted on the end-effector of a robot manipulator. This approach significantly differs from other calibration approaches in that the calibration is achieved by simply observing the motion of the moving object (without resorting to any other external calibrating tools) at numerous and widely varying joint-angle configurations. A differential error model, which expresses the measurement errors of a robot in terms of robot link parameter errors and motion parameters, is developed. And then a measurement equation representing the true measurement values is derived. By estimating the above two kinds of parameters minimizing the difference between the measurement equations and the true moving pattern, the calibration of the robot link parameters and the estimation of the motion parameters are accomplished at the same time.

• 산업공학
• /
• 제24권4호
• /
• pp.447-456
• /
• 2011

Identifying the major moving patterns of shoppers' movements in the selling floor has been a longstanding issue in the retailing industry. With the advent of RFID technology, it has been easier to collect the moving data for a individual shopper's movement. Most of the previous studies used the traditional clustering technique to identify the major moving pattern of customers. However, in using clustering technique, due to the spatial constraint (aisle layout or other physical obstructions in the store), standard clustering methods are not feasible for moving data like shopping path should be adjusted for the analysis in advance, which is time-consuming and causes data distortion. To alleviate this problems, we propose a new approach to spatial pattern clustering based on longest common subsequence (LCSS). Experimental results using the real data obtained from a grocery in Seoul show that the proposed method performs well in finding the hot spot and dead spot as well as in finding the major path patterns of customer movements.

• 대한전자공학회논문지
• /
• 제7권3호
• /
• pp.12-18
• /
• 1970

본 논문에서는 광속에 비해서 대단히 낮은 속도로 운동하고 있는 선형, 등방, 균질 매질내에서 크기가 파장과 동등정도이거나 그 이상인 Circular Loop Antenna의 방사특성을 고찰하였다. 고찰에 있어서 우선 운동매질내에서의 전자파방정식인 Maxwell-Minkowski방정식을 토대로 하여 Circular loop antenna에 해당하는 Vector potential을 유도하고 전자계식을 구하였다. 다음 이와같이 유도된 식들로부터 특정한 파장과 속도에 대한 전자계를 계산하고 field pattern을 도시하였으며 이 pattern과 정지매질에서의 field pattern을 비교 검토하였다. 검토한 결과, 지향성은 loop면에 평행한 속도성분에 한하여 속도방향으로는 축소되고 속도와 반대방향으로는 신장되는 사실이 발견되었으며 이 경향은 속도가 클수록 동진주파수가 높을수톡 크게됨을 알수 있었다.

• 한국의류산업학회지
• /
• 제10권6호
• /
• pp.997-1005
• /
• 2008

The purpose of this study was to provide the available date to improve the uniform e of the woman employee of the department more aesthetical and functional on the base of the former studies on their situation of uniform wearing. The process of the study was to compare and evaluate the studied uniforms made of elastic material with the one two times after pattern amendment. The nine subjects composed of threes of 20s, 30s and 40s of age and the evaluators were 5 clothing experts. The 5 scored scale of sensory evaluation method was used to evaluate the appearance and the moving function. The data were analysed with mean and t-test. The results were as flowers: 1.The material of blouse was changed with Poly-span to improve the appearance and the moving function. 2.The new uniform got far more good evaluations in the appearance and the moving function showing the significant difference in p<.001 level. 3.The improved uniform blouse pattern was presented fig2 and fig3.

• 대한의용생체공학회:의공학회지
• /
• 제28권5호
• /
• pp.636-646
• /
• 2007

Adequate postural control depends on the spatial and temporal integration of vestibular, visual, and somatosensory information. Especially, the musculoskeletal function is essential to maintain the postural control. The experimental studies was performed on the muscular activities in the lower extremities during maintaining and moving exercises on an unstable platform with Magneto Rheological(MR) dampers. The unstable platform of the developed system was controlled by electric currents to the MR dampers. A subject executed the maintaining and moving exercises which are presented through the display monitor. The electromyographies of the eight muscles in lower extremities were recorded and analyzed in the time and the frequency domain: the muscles of interest were rectus femoris(RF), biceps femoris(BF), tensor fasciae latae(TFL), vastus lateralis(VL), vastus medialis(VM), gastrocnemius(Ga), tibialis anterior(TA), Soleus(So). The experimental results showed that the muscular activities differed in the four moving exercises and the nine maintaining exercises. For the anterior-posterior pattern, the TA showed highest activities; for the left-right pattern, the TFL; for the 45, $-45^{\circ}$ pattern, the TFL and TA. Also, the rate of the increase in the muscular activities were affected by the condition of the unstable platform with MR dampers for the maintaining and moving exercises. The experimental results suggest that the choice of different maintaining and moving exercises could selectively train different muscles in various intensity. Futhermore, the findings suggested that the training using this system can improve the ability of postural control.