• 혜화의학회지
• /
• 제16권2호
• /
• pp.281-288
• /
• 2007

Tremor is a rhythmic, involuntary muscular contraction characterized by oscillations (to-and-fro movements) of a part of the body. Essential tremor is a 6-8 Hz tremor that is of variable amplitude. It is aggravated by posture and movement and relieved by rest and alcohol. Most affected part are the arms, head and vocal apparatus. The purpose of this study is to show a case of tremor patient with essential tremor improved by oriental medical treatment. The patient was 71-year-old woman who featured essential tremor and at the same time complained general body weakness, nausea, and anorexia. She was treated by oriental medicine with acupuncture, herb medication, and Korean psychotherapy; Eejeong-byunki, Jiun-goron. The features of essential tremor was reduced after taking oriental medical therapy. This result suggested that the oriental medical therapy can be effective for treating essential tremor.

• 한국전기전자재료학회논문지
• /
• 제19권6호
• /
• pp.574-578
• /
• 2006

Toward the practical applications, on operation of conduction-cooled HTS SMES at temperatures well below 77 K should be investigated, in order to take advantage of a greater critical current density of HTS and considerably reduce the size and weight of the system. Recently, research and development concerning application of the conduction-cooled HTS SMES that is easily movement are actively progressing in Korea. Electrical insulation under cryogenic temperature is a key and an important element in the application of this apparatus. Using multi wrapped copper by Polyimide film for HTS SMES, the breakdown characteristics of models for turn-to-turn, that is surface contact model, were investigated under ac and impulse voltage at 77 K. A material that is Polyimide film (Kapton) 0.025 mm thickness is used for multi wrapping of the electrode. Statistical analysis of the results using Weibull distribution to examine the wrapping number effects on breakdown voltage under at and impulse voltage in $LN_2$ was carried.

• 대한기계학회논문집B
• /
• 제25권3호
• /
• pp.366-372
• /
• 2001

The ice plugging process consists of placing liquid nitrogen around a pipe and removing heat until the water in the pipe freezes and provides a solid plug or seal against fluid movement. This technique enables us to repair or inspect a pipe system without shutdown of entire system. A set of test apparatus for investigation of the liquid freezing phenomena during ice plugging is prepared. This study shows the characteristics of the liquid freezing and the heat transfer with various pipe and freezing jacket conditions. And in case there is flow of the fluid inside the pipe, the flow rate which can be able to form the ice plug is identified with the effect of the pipe diameter and freezing jacket length on the plug formation. The permissible maximum flow rate for the complete plug formation is approximately proportional to the freezing jacket length at the same pipe diameter condition.

• 한국기계가공학회지
• /
• 제20권9호
• /
• pp.42-47
• /
• 2021

A one-touch descending lifeline that can easily be installed and rapidly evacuated in the event of a fire accident in high-rise buildings was proposed to overcome difficulties of conventional descending lifeline such as complex installation methods and procedures. However, this lifeline exhibits limitations such as restrictions in installation location and large apparatus size. Therefore, this paper proposes a sliding-type descending lifeline, which has a similar operation to that of current one-touch descending lifeline and solves the aforementioned limitations. A double square link mechanism including a sliding four-bar linkage is proposed and the descending lifeline support is redesigned to unfold in two different planes, allowing 3D movement. Additionally, the shape of the support frame is designed to obtain two attachment surfaces that can be attached to a wall, irrespective of the angle between the window and the inner wall. FEA analysis using ABAQUS is performed to ensure that the robustness of the presented support complies with the Fire Control Act Enforcement Decree. Finally, the feasibility of the proposed sliding one-touch descending lifeline is verified through fabrication.

• Geomechanics and Engineering
• /
• 제25권1호
• /
• pp.49-58
• /
• 2021

The resistance of soil to the tractive force of flowing water is one of the essential parameters for the stability of the soil when directly exposed to the movement of water such as in rivers and ocean beds. Biopolymers, which are new to sustainable geotechnical engineering practices, are known to enhance the mechanical properties of soil. This study addresses the surface erosion resistance of river-sand treated with several biopolymers that originated from micro-organisms, plants, and dairy products. We used a state-of-the-art erosion function apparatus with P-wave reflection monitoring. Experimental results have shown that biopolymers significantly improve the erosion resistance of soil surfaces. Specifically, the critical shear stress (i.e., the minimum shear stress needed to detach individual soil grains) of biopolymer-treated soils increased by 2 to 500 times. The erodibility coefficient (i.e., the rate of increase in erodibility as the shear stress increases) decreased following biopolymer treatment from 1 × 10-2 to 1 × 10-6 times compared to that of untreated river-sands. The scour prediction calculated using the SRICOS-EFA program has shown that a height of 14 m of an untreated surface is eroded during the ten years flow of the Nakdong River, while biopolymer treatment reduced this height to less than 2.5 m. The result of this study has demonstrated the possibility of cross-linked biopolymers for river-bed stabilization agents.

• 전기학회논문지P
• /
• 제67권4호
• /
• pp.214-220
• /
• 2018

Light sources induced by gas discharge using rare gases have been widely used in the thin film deposition, the surface modification and the polymer etching. A dielectric barrier discharge (DBD) has been developed in order to consistently emit light and control the wavelength of the emission light. However, much research on the characteristics of the movement of discharge particles is required to improve the efficiency of the light lamp and the life-time of the light apparatus in detail. In this paper, we developed a He DBD discharge simulation tool and investigated the characteristics of discharge particles which were electrons, two positive ions ($He^+$, $He_2^+$) and 5 excited particles ($He^*(1S)$, $He^*(3S)$, $He^*$, $He^{**}$, $He^{***}$). The discharge currents showed the transition from pulse mode to continuous mode with the increase of power. With the accumulated charges on the barrier walls, the discharge current was rapidly increased and caused oscillation of the discharge voltage. As the gas pressure increased, $He_2^+$ and $He^*(3S)$ became the dominant activated particles. The input power was mostly consumed by electrons and $He_2^+$ ion. And the change curve showed that power consumption by electrons increased more with gas pressure than with source voltage or frequency.

• 전기전자학회논문지
• /
• 제22권4호
• /
• pp.1152-1157
• /
• 2018

논문에서는 밭농사에 적합하도록 설계된 와이어 기반 농약살포장비의 이동을 위한 구조물 설치 위치의 어려움을 해결하고자 한다. 이를 위해 간접적으로 대지구조를 파악할 수 있는 대지저항률 측정방법과 분석기술을 적용한다. 선정된 밭농사 지역에 일정 간격의 전극을 현장에 설치하고 내장형 제어보드에 다수의 스위치를 구동시켜 대지저항률 데이터를 자동 취득한다. 그리고 2차원 영상복원 알고리즘을 사용하여 대지분석을 수행하고 그 결과를 통해 실제 구조물 타설에 적합한 최적지점을 선정하고자 한다.

• 한국정보통신학회:학술대회논문집
• /
• 한국정보통신학회 2016년도 추계학술대회
• /
• pp.948-949
• /
• 2016

본 논문에서는 감마선원 영상화를 위한 감마선 탐지장치에 적용할 차폐체의 구조 변경에 대한 연구를 수행하였다. 선행 연구를 통해 상용 감마선 영상화 장치의 차폐체와 차폐효율은 유사하지만 경량화 그리고 무게중심을 이동시킨 차폐체를 구현하였다. 본 논문에서는 모션 제어장치의 효율적인 동작을 위해 차폐체를 변경하였다. 차폐체 설계를 위해서 MCNP 전산모사를 수행하였으며, 그 결과 약 15%의 경량화 및 무게중심을 차폐체 중심으로 이동시키는 결과를 얻었다.

• 한국지반환경공학회 논문집
• /
• 제11권9호
• /
• pp.27-38
• /
• 2010

모형실험과 유한요소법에 의한 수치해석을 통하여 측방변형지반 속에 설치된 매설관에 작용하는 측방토압을 관찰하였다. 모형실험에서는 모형지반 속에 매설관을 설치한 후 모형지반에 측방변형이 발생될 수 있게 모형실험기를 제작하여 실제 지반에서의 상황을 시뮬레이션하였다. 이 모형실험기는 지반의 변형속도를 여러 가지로 조절할 수 있게 제작하였다. 여러 가지 직경과 형상의 매설관에 대하여 실험을 실시함으로써 이들 요인이 측방토압에 미치는 영향을 조사하였다. 모형실험결과 연약지반의 측방유동으로 인하여 매설관에 작용하는 측방하중은 연약지반의 측방변형속도가 빠를수록 크게 작용하였다. 순간재하 조건에 의한 수치해석 결과는 지반변형속도가 중간 정도 빠르기인 0.3mm/min에서 1.0mm/min 사이의 지반변형속도의 조건에서 실시한 모형실험 결과와 유사하였다. 대부분의 모형실험결과 지반변형량이 작은 시점에서 측방하중의 제1항복이 발생하며 이때까지 탄성변형거동을 보이다가 제2항복에 이르기까지 하중이 한 동안 수렴되는 소성거동을 보였다. 지반변형이 계속하여 증가하면 측방하중도 다시 증가하여 압축거동을 보였다. 그러나 빠른 지반변형속도에서의 실험 결과에서는 항복하중에 도달한 후 수렴과정이 없이 계속하여 하중이 증가하였음을 볼 수 있다. 매설관의 직경이 클수록 측방유동 연약지반 속에 설치된 매설관에 작용하는 측방하중의 크기와 하중증가 속도가 컸으며 초기지반변형에서는 측방하중이 매설관의 직경 및 형상의 영향을 적게 받지만 지반변형량이 증가함에 따라 그 영향이 크게 나타났다.

• 한국통신학회논문지
• /
• 제2권1호
• /
• pp.20-28
• /
• 1977

世界貿易의 기둥이 되고 있는 海運業界가 大量의 貨物을 安全, 迅速히 運搬하기 위해 船舶의 大型化, 高速化를 꾀하고 있고, 船舶運行에 新技術을 導入하려고 하는 時代를 맞이하여 海事通信도 이의 重要急增에 對處하고 또 無線設備의 使用效率을 提高시킴과 同時에 通信士의 勞苦를 輕減시킬 수 있는 無線設備의 機械化와 近代化가 緊要하다. 船舶通信은 現在 短波通信을 主로 使用하고 있으나 短波는 電波傳播上의 여러 制約에 의해 回線品質이나 通信範圍가 充分치 않고 또 周波數面에서 볼 때 回線容量에 制限을 받고 있다. 이러한 點을 改善하고 多樣化되어 가고 있는 오늘날의 海事通信需要에 對處하기 위해 이 分野에 衛星通信의 導入이 必要하다. 衛星을 利用함에 따라 安定된 高品質의 回線을 設定할 수 있어 텔렉스, 펙시밀리, 高速度通信, 對象海域의 擴大等에 의해 船舶運行管理의 改善, 效率化, 航行의 安全性의 向上을 圖謀할 수 있고 船舶運營의 合理化가 可能하며 通信士의 動勞條件의 改善이 이룩될 수 있다. 海事衛星通信方式의 導入은 過法 10年間 INTELSAT의 경우에서와 같이 점차 回線科의 低廉化에 따라 이의 利用度가 急速히 伸張되어 갈 것이 展望되고 海事衛星通信이 앞으로는 全世界的으로 船舶通信의 主流를 이룰 것이 豫想된다.