• Journal of Advanced Navigation Technology
• /
• v.21 no.1
• /
• pp.36-42
• /
• 2017

An airport surface movement scheduler using first-come first-served (FCFS) algorithm is developed to efficiently manage surface traffic in an airport. It is based on the previously developed traffic flow management scheduler. Link directionality and intersection processing, which are additional constraints for ground movement, are added to the scheduler. To verify each of additional constraints, several simulations were performed by making simple scenarios, and the results show that all constraints were satisfied. Also, a simulation was performed by making a scenario based on flight operation information system (FOIS) data which is real departure and arrival flight data of Jeju airport. To determine the practicality of the developed scheduler, we compare the actual average delay time with the average delay time calculated by the scheduler.

• Journal of the Korean Data and Information Science Society
• /
• v.18 no.4
• /
• pp.1157-1170
• /
• 2007

LBS must manage various context data and make the best use of this data for application service in ubiquitous environment. Conventional mobile object data management architecture did not consider process of context data. Therefore a new mobile data management framework is needed to process location context data. In this paper, we design a new context management framework for a location based application service. A suggestion framework is consisted of context collector, context manager, rule base, inference engine, and mobile object context database. It describes a form of rule base and a movement process of inference engine that are based on location based application scenario. It also presents an embodiment instance of interface which suggested framework is applied to location context interference of mobile object.

• Proceedings of the KSR Conference
• /
• 2007.05a
• /
• pp.1403-1407
• /
• 2007

The bogie of Rolling Stock is the basic rolling component. It operates the train body, guides the body considering various tracks and offers comfort to passengers. We can verify the safety level of bogie about all factors through the first -grade scenario of Preliminary Hazard Analysis, but especially the horizontal acceleration sensor, equipped in each power bogie and trailer bogie, is the device, which makes it possible to test bogie instability and uncomfortable body movements by the method, similar to actual train driving, and in this context the necessity of this device becomes important. This paper would classify the main functions of driving sub system and examine the reliability, availability, maintainability and safety, which are main factors of RAMS. Especially, we would realize the bogie instability sensor with a simulator and offer the content in analyzing the data by the statistical method, which are obtained through the connected test with OBCS.

• Journal of Climate Change Research
• /
• v.9 no.1
• /
• pp.91-102
• /
• 2018

The Korean government submitted the Intended Nationally Determined Contributions (INDC) to UNFCCC which aims to reduce 37% greenhouse gas emission for the opportunity of developing new energy industry and industry innovation by 2030 compared with Business-As-Usual scenario taking into account its international responsibilities and hosting headquarters of Green Climate Fund (GCF) secretariat. The 37% reduction is composed of 25.7% in the domestic markets and 11.3% in the international carbon markets. To achieve the reduction target in the international carbon market mechanisms, it must use the linkage of international carbon markets and develop new renewable energy technology for CDM and ODA. Finally, it must improve carbon capture storage (CCS) technology and establish domestic CCS institutional systems as soon as possible. And, it must activate CCS information exchange for the international cooperation on UNFCCC movement.

• Journal of Korea Multimedia Society
• /
• v.24 no.6
• /
• pp.760-767
• /
• 2021

The identity verification is one of the most important technologies in online services. Many services in society are provided online, and the service is provided after confirming the user's identity. Users can do a lot of things online, but they also have side effects. Online digital information is easily manipulated and it is difficult to verify its authenticity, causing social confusion. Accordingly, there has been a movement for individuals to directly manage their identity information using DID. In this paper, we propose a system that can authenticate identity by directly adding own personal information and issuing an identifier using DID technology based on a private blockchain. Then, to verify the proposed system, the scenario is executed and verified.

• International Journal of Naval Architecture and Ocean Engineering
• /
• v.12 no.1
• /
• pp.910-917
• /
• 2020

In fire suppression, continuous delivery of water or foam to the fire source is essential. The present study concerns fire suppression in a ship under sea condition, by introducing reinforcement learning technique to aiming of fire extinguishing nozzle, which works in a ship compartment with six degrees of freedom movement by irregular waves. The physical modeling of the water jet and compartment motion was provided using Unity 3D engine. In the reinforcement learning, the change of the nozzle angle during the scenario was set as the action, while the reward is proportional to the ratio of the water particle delivered to the fire source area. The optimal control of nozzle aiming for continuous delivery of water jet could be derived. Various algorithms of reinforcement learning were tested to select the optimal one, the proximal policy optimization.

• Journal of the Korean Society of Industry Convergence
• /
• v.25 no.2_1
• /
• pp.169-176
• /
• 2022

Prognostics and health management (PHM) is recently converging throughout the industry, one of the trending issue is to detect abnormal conditions at decanter centrifuge during water treatment facilities. Wastewater treatment operation produces corrosive gas which results failures on attached sensors. This scenario causes frequent sensor replacement and requires highly qualified manager's visual inspection while replacing important parts such as bearings and screws. In this paper, we propose anomaly detection by measuring the vibration of the decanter centrifuge based on the video camera images. Measuring the vibration of the screw decanter by applying the optical flow technique, the amount of movement change of the corresponding pixel is measured and fed into the LST M model. As a result, it is possible to detect the normal/warning/dangerous state based on LSTM classification. In the future work, we aim to gather more abnormal data in order to increase the further accuracy so that it can be utilized in the field of industry.

• Journal of the Society of Disaster Information
• /
• v.20 no.1
• /
• pp.69-81
• /
• 2024

Purpose: Recently, there has been a movement to guarantee the right to watch sports for the disabled. However, the sports stadium is designed without considering the wheelchair users, so the right to move in the stadium is not secured. Restrictions on the movement of the disabled make the evacuation vulnerable in an emergency. This study aims to develop a plan to ensure the safety of movement and evacuation of wheelchair users by conducting simulations targeting indoor sports stadiums. Method: The simulation was performed by constructing a scenario with the shape of the stands as a variable. The effect of the installation of wheelchair seats on evacuation was confirmed. Result: The results according to whether wheelchair seats are installed, the evacuation route of wheelchair movement, and whether wheelchair seats are separately arranged were compared. The impact of wheelchair seat installation on evacuation and its characteristics were derived. As a result, upward and separation seat was the most vulnerable to evacuation. Conclusion: A plan to secure evacuation performance was derived for the top floors of upward and separation seat. It is judged that the content can be use as a way to secure the safety of movement and evacuation of the disabled in sports stadiums.

• Journal of the Korea Society for Simulation
• /
• v.22 no.4
• /
• pp.99-107
• /
• 2013

In this study, a conceptual study was performed for the leisure boat simulator used for navigation training. The aim of this work was to secure the basic operational capability of a leisure boat as a simulated driving device for a general novice operator. A leisure boat simulator was designed to support a user more efficiently regarding navigation proficiency and safety training, as well as to minimize the limitation of place and time and it conveniently and cheaply. A cockpit for navigation status display and operational input, 3D visualization graphic device, and parallel display device were designed to give the trainee a maximum sense of reality by applying a motion platform with six degree of freedom, in which disturbance movement such waves, winds, and tide were simulated for the operator. Leisure boat simulator training scenario was developed by analysis of water-related leisure activities act and sea traffic safety act.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.3
• /
• pp.50-58
• /
• 2017

TPCLT(Twice Per Cycle Left-turn) operation reduces this left-turn 'spill-over' problem on an as needed basis by servicing the protected left-turn movement as a leading and a lagging left-turn. In this study, to evaluate the effectiveness of TPCLT applied to three-legged signalized intersection in Korea, the analysis was carried out using VISSIM and SSAM model analysis. The study was implemented by three cases which are TPCLT operation, non-TPCLT operation and half-cycle operation using VISSIM program. According to the 9-left-turn volume scenario, total delay and travel times of each case was analyzed by VISSIM program. The study result shows more effective applying TPCLT operaion in the present ~ +50% scenario area at the intersection in terms of total delay.