• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.8 no.5
• /
• pp.151-159
• /
• 2009

Network models for pedestrian flows have been studied in various ways. However, because of the simplicity and application, a number of researchers prefer the CA Model to analyze pedestrian's complicated behavior. These kinds of models based on Agent are being used as a microscopic analyzing method since it can easily adapt individuals' various characters and movement types. However, because pedestrians' movement can be (easily) effected by where they are and where they head, some models using the same rules have limit when considering pedestrians' every different movement. In this research, homogeneous section is defined as a similar movement type of individuals. With MDPM, we suggest simulation method explaining one-way walk and side-walk which could not be done in past.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.21 no.2
• /
• pp.82-86
• /
• 2011

Lightweight aggregate which is composed of sintered polycrystalline materials usually has a certain portion of pores inside of it. Because of such a structural characteristics, it tends to that movement of water in aggregate shows an abnormal behavior against the change of outside environment. In general, water movement behavior is controlled by porosity, distribution of pore size; however, dense surface layer will also affect water movement behavior in case of artificially sintered aggregates. Factors affecting water movement behavior in the aggregate are pore distribution, pore shape, pre-wetting method, etc. In this study, absorption characteristics of aggregate under the pressure and absorption rate according to water dipping time are analyzed for the basis of pressure pumping of lightweight concrete. Two kinds of aggregates were used for the test: one is made by 'L' company in Germany and the other is of our own made at the pilot plant in Kyonggi University. Absorption rate of aggregate is measured according to water dipping time, vacuum pressure, and quenching condition. Absorption rate of aggregate with $300^{\circ}C$ quenching is higher than that of aggregate with 24 hr water dipping. Generally the more vacuum the higher water absorption rate. Water absorption rate of 'L' aggregate under -300 mmHg is 54 % higher than that of aggregate with 24 hr water dipping; however, only 2 % increase in water absorption was measured for the K622 and K73 which were of our own.

• Journal of Korean society of Dental Hygiene
• /
• v.10 no.2
• /
• pp.269-282
• /
• 2010

Objectives : The purpose of this study was to investigate attitudes toward and practice of oral health management among adults in the Gumi area. Health behavior especially drinking and smoking have been proven to affect the tissues around the teeth and increasing in importance. Thus the study set out to examine oral management according to drinking and smoking to suggest a need for education about oral health and provide basic data for oral health education. Methods : Total 226 subjects, who consist of 141 male adults and 85 female adults, in Gumi were asked to fill out a self-administered questionnaire on October 24, 2009. Their answers to the items about general characteristics, health behavior, and oral health behavior were analyzed with the SPSS WIN 12.0 program. Results : 1. As for the frequency of visiting a dental clinic(hospital) for the last year, the non-movement group recorded higher frequency than the movement group, and the drinking group also did than the non-drinking group(p<0.05). 2. As for the experience and frequency of scaling, the female subjects were higher in the experience and frequency of scaling than their male counterparts. The older they got, the more they tended to have scaling. The married respondents had more experiences of scaling than the singles, and the non-drinking group was high in the experience of scaling(p<0.05). 3. As for the number, time, and method of toothbrushing a day, more women answered they brushed teeth three times or more per day than men; those who were in their forties were the highest in terms of the roll method, and those who were in their twenties were the highest in terms of toothbrushing time. The married group and the non-smoking group answered they brushed teeth in the roll method three times or more per day in higher percentage. And the non-drinking group was high in the roll method, which was statistically significant(p<0.05). 4. As for use and kinds of auxiliary oral hygiene devices, the female respondents used them more than their male counterparts. The older they became, the more they used them. The married group, the non-smoking group, and the non-drinking group used such devices a lot. The smoking group used dental floss most, and the non-smoking group used more kinds of such devices than the smoking group, which was statistically significant(p<0.05). Conclusion : Oral diseases can be prevented by adopting healthy and right oral management behavior. Using the findings of the study, more diverse programs about actual oral health education should be activated so that people can change their bad oral management and behavior and develop a habit of the right oral management attitude.

• Transactions of Materials Processing
• /
• v.10 no.7
• /
• pp.525-533
• /
• 2001

PET bottles are main]y manufactured by the stretch blow-molding process. In order to improve the thickness distribution to avoid crack generation at bottom region of one-piece PET bottle, process analysis of stretch blow-molding using a finite element method has been carried out. Finite element analysis has been carried out using ABAQUS/Standard. CREEP user subroutine provided in ABAQUS has been used to model PET behavior that is rate sensitive. Among the process parameters, the effect of plunger movement to thickness distribution of bottle has been considered by axisymmetric analysis. A modified process of plunger movement, which yields more uniform thickness distribution, has been proposed. 3D FE analysis has been done to confirm the validity of the proposed process.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.10 no.4
• /
• pp.97-103
• /
• 2001

The study on the high-speed machine tool is very important for the improvement of productivity since it can shortens cutting and non-cutting time. Especially, high speed of feed drive system is the major research field. In the industries of the advanced countries, the feed drive systems at the speed of 60 m/min have been already developed based on the high lead ball screws. In this study, a high speed feed drive system at the speed of 60 m/ min has been developed, and its movements characteris-tics are investigated. As the movement characteristics, positioning accuracy, angular accuracy, straightness and micro step-response are measured. Thermal characteristics of the system is also discussed. For measuring the movement characteris-tics, a laser interferometer, a memory-based Hi-coder and a cooling device are used. The experimental results confirm that the movement characteristics and the thermal behavior of the system are satisfactory in the aspect of accuracy and stability.

• Proceedings of the IEEK Conference
• /
• 1999.06a
• /
• pp.1121-1124
• /
• 1999

Linear motor is able to produce line movement without rotary-to-line converter at the system required line moving. Thus Linear motor has no gear, screw, belt for line movement. Therefore it has some advantage which decrease friction loss, noise, vibration, maintenance effort and prevent decay of control performance due to backlash. This paper proposes the estimation method of unknown parameters from the BLDC Linear motor and determine the PI controller gain through this estimation. Each control movement that is current, speed, position control, and PWM wave generation is performed on Processor, which is DSP(Digital Signal Processor), having high speed performance. PI theory is adopted to each for controller for control behavior More fast convergence to command position is accomplished by applying the new velocity locus which derived from position error.

• Anxiety and mood
• /
• v.12 no.2
• /
• pp.69-78
• /
• 2016

Objective : Disaster causes psychological distress to a large number of people in a short period of time, by both direct and indirect exposure to traumatic events embedded in various realms of disaster experience. Optimal, well-planned treatment interventions should follow from the early acute period to recovery phase, extending up to several months later. In this context, there is an increasing need for systemic review to gain comprehensive insights for disaster interventions. These need to be added to public policy, and for the prevention and treatment of disaster-related psychopathology. Here, we review the published studies on psychological interventions for disaster-related posttraumatic stress disorder. Methods : Specific psychological interventions regarded as effective treatments for have been selected for this review, such as CBT (Cognitive-Behavior Therapy), Exposure Therapy, EMDR (Eye Movement Desensitization & Reprocessing), SIT (Stress Inoculation Therapy) and Psychoeducation. In addition, natural disasters, industrial disasters, and accidents involving aircraft and ships were also categorized as disasters, along with war and combat trauma. Results : Cognitive behavior therapy and exposure therapy had the strongest research support for effectiveness, and could be considered as the first-choice treatment for disaster-related PTSD. The second line of treatment is EMDR, although this treatment modality has the advantage of reaching certain treatment improvements in fewer sessions. However, the effects of SIT and psychoeducation to the survivors of disasters, remains unclear at this point. Additionally, we propose the possibilities of using virtual reality component and imagery rescripting as modified forms of traditional cognitive behavior therapy and exposure therapy. Conclusion : Cognitive behavior therapy and exposure therapy, deemed effective treatments for various trauma, are considered to be effective for survivors from disasters. However, the efficacy of other interventions has not yet been examined methodologically in well-designed studies, such as randomized controlled trials. In particular, future empirical studies are needed, since it is difficult to conclude that psychological interventions have similar effects on different types of disasters.

• Convergence Security Journal
• /
• v.18 no.5_1
• /
• pp.45-51
• /
• 2018

As data utilization and importance becomes important, data-related accidents and damages are gradually increasing. Especially, insider threats are the most harmful threats. And these insider threats are difficult to detect by traditional security systems, so rule-based abnormal behavior detection method has been widely used. However, it has a lack of adapting flexibly to changes in new attacks and new environments. Therefore, in this paper, we propose an adaptive anomaly movement detection framework based on a statistical Markov model to detect insider threats in advance. This is designed to minimize false positive rate and false negative rate by adopting environment factors that directly influence the behavior, and learning data based on statistical Markov model. In the experimentation, the framework shows good performance with a high F2-score of 0.92 and suspicious behavior detection, which seen as a normal behavior usually. It is also extendable to detect various types of suspicious activities by applying multiple modeling algorithms based on statistical learning and environment factors.

• Journal of Communications and Networks
• /
• v.17 no.4
• /
• pp.384-393
• /
• 2015

This paper proposes an insect behavior-inspired routing algorithm for large-scale wireless mesh networks. The proposed algorithm is adapted from the behavior of an insect called Bombyx mori, a male silkmoth. Its unique behavior is its flying technique to find the source of pheromones. The algorithm consists of two steps: the shortest-path algorithm and the zigzag-path algorithm. First, the shortest-path algorithm is employed to transmit data. After half of the total hops, the zigzag-path algorithm, which is based on the movement of the male B. mori, is applied. In order to adapt the biological behavior to large-scale wireless mesh networks, we use a mesh topology for implementing the algorithm. Simulation results show that the total energy used and the decision time for routing of the proposed algorithm are improved under certain conditions.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2005.10a
• /
• pp.3-14
• /
• 2005

Reliable predictions of the movement of earth retaining structures and the ground adjacent to braced walls in urban excavation are often difficult due to many variable factors. The ground settlement and the damage of adjacent structures in urban excavation has been an important issue. Therefore, the stability of the adjacent structures must be secured with the excavation support and research on the protection of adjacent structure is necessary. This study showed an urban excavation case and introduce observation method for case of damage behavior in urban excavation.