• 한국통신학회논문지
• /
• 제28권8B호
• /
• pp.707-715
• /
• 2003

본 논문에서는 Slotted CDMA 환경에서 멀티미디어 트래픽의 Qos를 보장하기 위하여 트래픽 상황에 따라 클래스별 경계를 조절하는 방식(Movable-boundary)을 이용한 새로운 MAC(Medium Access Control) 프로토콜을 제안한다. 이 기법은 트래픽 스케줄러가 서비스 클래스별 패킷의 우선 순위에 의하여 자원을 할당하고, 클래스별로 할당된 최소 자원을 사용하지 않을 경우 동적으로 다른 클래스 트래픽이 사용할 수 있도록 하는 Movable-boundary 개념을 적용하였다. 설계된 프로토콜의 성능 평가를 위해 시스템 처리율(throughput)과 패킷의 손실율(loss rate)관점에서 Fixed-boundary를 이용한 방식과 비교 분석하였다. 시뮬레이션 결과, 음성과 같이 실시간에서 낮은 손실율을 요구하는 트래픽의 경우 Movable-boundary를 사용함으로써, 비디오같이 연집(bursty)한 특성의 트래픽과 채널을 공유하더라도 요구하는 손실율을 일정한 기준치 이하로 유지 시켜줄 수 있었다. 또한, Fixed-boundary를 사용한 방식보다 처리율과 손실율에 우수함을 보였다.

• Structural Engineering and Mechanics
• /
• 제86권6호
• /
• pp.751-764
• /
• 2023

In practical engineering such as aerial refueling pipes, the boundary of the fluid-conveying pipe is difficult to be completely immovable. Pipes under movable and immovable boundaries are controlled by different dominant nonlinear factors, where the boundary mobility will affect the nonlinear dynamic characteristics, which should be focused on for adopting different strategies for vibration suppression and control. The nonlinear dynamic instability characteristics of functionally graded fluid-conveying pipes lying on a viscoelastic foundation under movable and immovable boundary conditions are systematically studied for the first time. Nonlinear factors involving nonlinear inertia and nonlinear curvature for pipes with a movable boundary as well as tensile hardening and nonlinear curvature for pipes with an immovable boundary are comprehensively considered during the derivation of the governing equations of the principal parametric resonance. The stability boundary and amplitude-frequency bifurcation diagrams are obtained by employing the two-step perturbation- incremental harmonic balance method (TSP-IHBM). Results show that the movability of the boundary of the pipe has a great influence on the vibration amplitude, bifurcation topology, and the physical meanings of the stability boundary due to different dominant nonlinear factors. This research has guidance significance for nonlinear dynamic design of fluid-conveying pipe with avoiding in the instability regions.

• 대한조선학회논문집
• /
• 제48권1호
• /
• pp.23-32
• /
• 2011

Numerical analysis of hydrodynamic performance of a movable submerged breakwater was carried out as an eco-friendly marine structure for coastal and harbor protection. Using boundary elements method with two-dimensional frequency-domain reflection and transmission coefficients and wave forces acting on the submerged flat plate were calculated with various submerged depths and respective motion allowable modes. The movable breakwater was found to be more efficient in wave-blocking than the fixed structure. Variation of reflection coefficients was significantly influenced by vertical motion of the body.

• 한국정밀공학회지
• /
• 제23권3호
• /
• pp.102-109
• /
• 2006

Several methods for PCB pattern inspection have been tried to detect fine detects in pad contours, but their low detection accuracy results from pattern variations originating from etching, printing and handling processes. The adaptive inspection algorithm has been newly proposed to extract minute defects based on movable segments. With gerber master images of PCB, vertex extractions of a pad boundary are made and then a lot of segments are constructed in master data. The pad boundary is composed of segment units. The proposed method moves these segments to optimal directions of a pad boundary and so adaptively matches segments to pad contours of inspected images, irrespectively of various pattern variations. It makes a fast, accurate and reliable inspection of PCB patterns. Its performances are also evaluated with several images.

• 한국통신학회논문지
• /
• 제31권3C
• /
• pp.264-270
• /
• 2006

In this paper, we propose the modified display color control system using white point line, boundary lines and S-shaped curves to emphasize blue and red tone colors on CIE1931 diagram. The proposed system divides RGB gamut into movable area and non-movable area by using boundary lines. The colors in movable area are moved into right side or left side along quadratic curve to change the bluish (or reddish) color to more bluish (or more reddish), while those in non-movable area are excepted from color control to prevent skin color from changing. The loci of the quadratic curves are very similar to the arc of the white-point line which connects all points that represent the chromaticities of a black body radiator at different temperatures and is also called the black body locus. The RGB gamut extension by movement of chromaticity coordinate can improve color reproducibility. Therefore in the case of application to LCD, the display shows excellent performance because the LCD's color reproducibility is comparatively lower than that of other display systems. The proposed system is also experimentally demonstrated with Xilinx Virtex FPGA XCV2000E- 6BG560 and the TV set.

• 한국통신학회논문지
• /
• 제18권9호
• /
• pp.1304-1314
• /
• 1993

최근 몇 년 동안 이동통신의 편이성으로 인해 이동통신의 수요가 급증하고 있어 수년내에 새로운 셀룰러망으로의 진화가 절실히 요구되어지고 있다. 따라서 본 논문에서는 셀룰러망의 전화 전망에 대해서 살펴보고, 차세대 셀룰러 패켓 라디오망에서의 새로운 음성/데이타 집적 다중 엑세스 프로토콜로 가변경계 TDMA/BTMA 프로토콜을 제안하며 컴퓨터 시뮬레이션을 통해 PRMA 프로토콜과 가변경계 TDMA/BTMA프로토콜의 성능을 비교분석한다. 시뮬레이션 결과, 지연에 민감한 음성 트래픽에는 TDMA프로토콜을 사용하고, 패켓 손실에 민감한 데이타 트래픽에는 BTMA프로토콜을 사용하며, 동기신호와 제어정보 및 호 접속 계수기를 사용하여 음성과 데이타영역의 경계를 가변화시킨 가변경계 TDMA/BTMA프로토콜이 PRMA 프로토콜 보다 우수한 성능을 나타냄을 알 수 있었다.

• Nuclear Engineering and Technology
• /
• 제55권2호
• /
• pp.460-474
• /
• 2023

A simple but accurate mathematical model is crucial for dynamic simulations and controller design of helical coil once-through steam generator (OTSG). This paper presents a three-region movable boundary dynamic model of the helical coil OTSG. Based on the secondary side fluid conditions, the OTSG is divided into subcooled region (two control volumes), two-phase region (two control volumes) and superheated region (three control volumes) with movable boiling boundaries between each region. The nonlinear dynamic model is derived based on mass, energy and momentum conservation equations. And the linear model is obtained by using the transfer function and state space transformation, which is a 37-order model of five input and three output. Validations are made under full-power steady-state condition and four transient conditions. Results show good agreements among the nonlinear model, linear model and the RELAP5 model, with acceptable errors. This model can be applied to dynamic simulations and controller design of helical coil OTSG with constant primary-side flow rate.

• 대한조선학회논문집
• /
• 제49권4호
• /
• pp.287-295
• /
• 2012

Hydrodynamic performance of a movable submerged breakwater was analyzed using energy dissipation model. Based on two-dimensional boundary element method the equation of motion including a viscous dissipation term proportional to velocity squared was solved by Newton-Raphson method. Energy dissipation coefficients as well as reflection and transmission coefficients of a submerged flat plate were calculated with various plate lengths and thickness. Both real and imaginary components of body displacement and forces were used to solve the motion of breakwater accurately. The effect of the magnitude of dissipation coefficient on the body displacement was evaluated. The results from the potential theory with no dissipation term were found to be an overestimate in resonance frequency.

• 대한기계학회논문집A
• /
• 제27권1호
• /
• pp.88-93
• /
• 2003

The aim of this paper is to investigate the friction characteristics of piston assembly, which composed of ring pack and piston skirt. The friction force of piston assembly was measured by using the movable liner in the single cylinder engine, and the various parameters were tested. The friction force was suddenly increased at the expansion stroke due to higher cylinder pressure. The viscous friction was dominant at the mid stroke, but the boundary friction was dominant at the top and bottom dead centers. Through the experiment, we could validate previous theoretical study, and confirm that th e radial clearance and ring tension were very effective to reduce friction loss of piston assembly.

• 한국통신학회논문지
• /
• 제22권2호
• /
• pp.268-279
• /
• 1997

In this paper, we show the movable boundary (MB) method is the effective bandwidth allocation strategy for the ABR service among existing bandwidth allocation methods. The MB method can gurantee the QOS requirement according to the service priority and improve bandwidth utilization using the characteristics of the ABR service. The threshold values of the MB, which have an important effect upon connection blocking probability(CBP) performance of each service, are obtained by simulation. The MB method with the fixed thresholds, however, may not have good performance to variation of input traffic parameters. We suggest the dynamic MB method which changes the threshold values adaptively according to the required bandwidth of input traffic. We also show that the dynamic MB method can urantee the CBP performance according to the service priority regardless of variation of input traffic parameters.