• The Journal of the Acoustical Society of Korea
• /
• 제28권1E호
• /
• pp.23-28
• /
• 2009

At the crossings of turnout systems, noise is generated by the impact of train on the connection points. However, rapid movement changes between rail and wheels on connection point are inevitable on existing turnout section which may cause safety concern as well as noise problem caused by repeated impact load by passing train. And given the turnout is a complicated system which combines various functions such as rolling stock, trackbed, signaling, communication and electrical system, it's very difficult to expect to improve the overall performance of the turnout in such a way of optimizing only particular part of such integrated system. Since the turnout is the only movable section among the integrated parts and has complicated structure that inevitably brings about quick and sudden movement, safety has been still put on the top of the list. This study was aimed at comparing and analyzing the noise data obtained around the turnout of existing railway, by categorizing them into tilting train, high speed train and traditional train, and by distance, speed and type of turnout. And based on the data measured, the forecast of noise level when tilting train accelerates around a turnout was conducted in the study.

• 대한조선학회 특별논문집
• /
• 대한조선학회 2008년도 특별논문집
• /
• pp.136-143
• /
• 2008

This paper presents the application of a robot which aims at grinding automatically welding-bead remained in the removal job of working pieces for shipbuilding. In specific, the investigation on this application is composed of two parts; one topic is on the development of a robot platform vertically movable on a steel plate of hull, while the other topic is of the development of a grinding tool mechanism in order to remove welding-beads by using a diamond wheel installed on a servo cylinder (which can result in high working pressure on the grinding wheel). Besides, the development of a vision system for tracking welding-beads as well as recognizing welding surfaces is added for the convenience of this robot application to the removal of welding-beads remained in the working pieces for shipbuilding.

• 전기학회논문지
• /
• 제58권11호
• /
• pp.2128-2135
• /
• 2009

In this paper, current limiter using a magnetic switching which is based on magnetic flux change in the case of fault is proposed. This current limiter consists of iron-core and three parts of coils. One is the primary coil connected to the power system. Another is the secondary coil wound to the opposite direction of the primary coil's winding. The other is the secondary of the secondary coil which is a movable copper plate winding and located below the secondary coil. In the normal state, the magnetic flux produced in the primary and secondary coils flows to the opposite directions each other and becomes to be canceled out. Therefore the voltages induced between the coils are zero. In the case of a fault, at the moment of a fault occurrence recognition, the switch connected to a secondary coil is opened and the secondary of the secondary coil is pulled out to the outside of the iron-core. Then, magnetic flux becomes to flow through the iron-core. Accordingly, the voltage is induced between the both ends of the primary coil and makes the current reduced. Therefore it is possible to cut off the circuit breaker easily with the proposed current limiter. This paper analyzes the current limiting effects and the detailed results are given.

• 한국안전학회지
• /
• 제32권4호
• /
• pp.34-39
• /
• 2017

Typical flow regime of overflow at barrier or weir constructed in mid and small streams becomes as the submerged flow during most flood events. One of major causes of barrier failure has been reported as the levee-scour near the conjuction node between barrier and levee. However, most related design guidelines in Korea have not mentioned about the protection of levee around barrier or weir in detail. Furthermore, most previous researches have focused on the flow characteristics of overflow around several types of weirs but they did not have considered the material properties of levee itself. In this study, local scour near barrier was investigated with different material properties of levee under the submerged overflow condition which is assumed to reenact a flood event. Based on results from Fritz et al. and Mavis et al., a theoretical formula was also proposed in initial stage of laboratory experiments. And hydraulic experiments were carried out for the verification of the proposed formula. Levee was installed in the prismetic trapezoidal open channel and most parts were made of concrete except for movable section in which scour was expected to occur for the efficiency of experimental procedure. Each compaction of movable section in levee was followed by the basis of the KS F 2312. Further, after performing the experiments to find the optimum water content for each sediment, the specific amount of water was injected before flowing water. The difference between the proposed theoretical formula and experiment results was not much but considerable, which might be caused by the effect of compaction. For theoretical approach, it seemed that the formula did not take into account the compaction of levee, thus the correction coefficient for levee compaction determined in the literature was considered. Finally, the formula for the length of scour around barrier or weir was proposed, which can be useful to predict a levee in the reference design of revetment in mid and small streams. As shortly future study, scour length of levee around barrier or weir under different flow conditions such as perfect overflow condition will be studied and it will be able to contribute to suggest the design formula or criteria under all overflow conditions near barrier or weir.

• 한국전자파학회논문지
• /
• 제20권12호
• /
• pp.1308-1315
• /
• 2009

본 논문에서는 X-밴드용 완전 편파 scatterometer 시스템(HPS: Hongik Polarimetric Scatterometer) 설계와 제작된 측정 시스템 성능 검증을 위해 이론적으로 잘 알려진 점 목표물(point-target)의 주파수 응답 특성을 측정하는 연구 결과를 선보인다. X-밴드용 완전 편파 scatterometer 시스템은 크게 OMT(Orthogonal Mode Transducer)+horn 안테나, 이들의 입사각을 조절하는 입사각 제어 부분, 네트워크 분석기와 X-밴드용 주파수 변환 회로로 구성되는 송수신기, 이 장비들을 위한 지지용 이동식 붐대로 구성된다. 측정용 안테나의 수직과 수평 입사각 조절을 위해 각도 센서를 이용하며, 모든 입사각에서 완전 편파의 데이터를 획득할 수 있도록 편파 선택용 스위치 회로를 사용한다. 또한, 설계된 측정 시스템의 성능 검증을 위하여 OMT+horn 안테나를 이용한 수동 반사기(corner reflector)의 주파수 응답 특성 즉, 완전 편파 RCS(Radar Cross Section)를 측정한다.

• 복식
• /
• 제60권6호
• /
• pp.1-10
• /
• 2010

The cultures and traditions of Asia has the roots so deep and it is the origin of inspiration. Therefore, it is easy to find a different inspiration when designing, expecially for Western designers who are seeking European tradition and its comparison. The most distinctive feature of the Asian look is non-structural and has no clear form close to the structure of the body or mathematical ratio, but is steric with 2-Dimensional planed textiles, and has a flexible, non-structural formative characteristic related to the movable body. This is base on the vision of the universe that regards the parts as the whole. From this research, generally studying about the Asian look and its non-structural formative characteristics. The study looked closely into the aesthetic value of non-structural formative characteristics formation, with basis on the large dress regulation system of the western reasoning and rationalism and mechanism. At first, my study pointed on the dressing functionalism or Neo-classism considering emotions, Anti-Western aspect observing surrealism dressing and expressionism dressing. Second, with men and women showing similar outer shape without the equivalent element such from wearing a corset, the sexism is abolished. Finally, the designers’ inner intention of art is being delivered, from the aspect that the expression of art, size and no waste of fabric shows effort of communicating with the world, giving value to the possibility of continuance.

• 한국지구과학회지
• /
• 제24권3호
• /
• pp.172-180
• /
• 2003

지질조사는 제7차 지구과학교육과정에서 지구과학을 배우는 학생에게 매우 중요하지만, 시간, 거리, 비용이 너무 많이 들어 실제로 학생들이 야외지질조사를 나가서 학습하기 어려운 경우가 많다. 이러한 어려운 문제를 해결하기 위하여 이 연구는 제주도 송악산과 지삿개 일대를 선정하여 가상야외지질조사의 웹 컨텐츠와 교수-학습 자료를 개발하고자한다. 개발된 웹 컨텐츠는 주 메뉴, 부메뉴, 내용의 3 부분으로 구분하여 학습자가 쉽게 인식하도록 구성하였다. 기존웹 자료의 한계를 극복하기 위하여 동영상과 탐구 학습지를 학습자에게 제공하였고 웹 컨텐츠는 실제 야외지질조사에서 얻을 수 있는 내용을 체험할 수 있도록 고안하였다.

• Nuclear Engineering and Technology
• /
• 제50권7호
• /
• pp.1051-1059
• /
• 2018

Fast periodic pulsed reactor is a type of reactor in which the fission bursts are formed entirely with external reactivity modulation with a specified time periodicity. This type of reactors could generate much larger intensity of neutron beams for experimental use, compared with the steady state reactors. In the design of fast periodic pulsed reactors, the time dependent simulation of the power pulse is majorly based on a point kinetic model, which is known to have limitations. A more accurate calculation method is desired for the design analyses of fast periodic pulsed reactors. Monte Carlo computer code MCNP6 is used for this task due to its three dimensional transport capability with a continuous energy library. Some new routines were added to simulate the rotation of the movable reflector parts in the time dependent calculation. Fast periodic pulsed reactor IBR-2M was utilized to validate the new routines. This reactor is periodically in prompt supercritical state, which lasts for ${\sim}400{\mu}s$, during the equilibrium state. This generates long neutron fission chains, which requires tremendously large amount of computation time during Monte Carlo simulations. Russian Roulette was applied for these very long neutron chains in MCNP6 calculation, combined with other approaches to improve the efficiency of the simulations. In the power pulse of the IBR-2M at equilibrium state, there is some discrepancy between the experimental measurements and the calculated results using the point kinetics model. MCNP6 results matches better the experimental measurements, which shows the merit of using MCNP6 calculation relative to the point kinetics model.

• Design & Manufacturing
• /
• 제16권4호
• /
• pp.67-74
• /
• 2022

Injection molding is a cyclic process comprising of cooling phase as the largest part of this cycle. Providing efficient cooling in lesser cycle times is of significant importance in the molding industry. Recently, lots of researches have been done for rapid cooling of a hot-spot area using CO2 in injection molding. The CO2 flows under high pressure through small, flexible capillary tubes to the point of use, where it expands to create a snow and gas mixture at a temperature of -79℃. The gaseous CO2 removes heat from the mold and releases it into the atmosphere. In this paper, a CO2 cooling module was applied to an injection mold in order to cool a large area cavity uniformly and quickly, and the cooling performance of the injection mold was investigated. The product was a high-curvature molded part with a molding area of 300x100mm. Heat cartridges were installed in a stationary mold, and CO2 cooling module was inserted inside a movable mold. Through structural analysis, it was confirmed that the maximum deformation of mold with CO2 cooling module was 0.09mm. A CO2 feed system with a heat exchanger was used for cooling experiments. The CO2 was injected into the holes on both sides of the supply pipe of the cooling module and discharged through hexagon blocks to cool the mold. It took 5.8 seconds to cool the mold from an average temperature of 140℃ to 70℃. Through the experiment using CO2 cooling module, it was found that a cooling rate of up to 12.98℃/s and an average of 10.18℃/s could be achieved.

• 한국응용과학기술학회지
• /
• 제34권2호
• /
• pp.394-399
• /
• 2017

본 연구는 오존수를 이용한 인체공학적 샴푸대가 분리 가능하고 미세분사 형식의 샤워헤드와 높낮이 조절이 가능한 샴푸대를 개발할 수 있는 장치기술 및 그 방법을 제시하고자 한다. 개발결과 기존의 장치보다 피시술자 머리가 세발대 안으로 들어오는 인체공학적 디자인과 목받이 부분을 높게 제작하여 물튀김 방지를 완성하였다. 실험결과 물을 공급하는 통에 부착되어 있는 온수 유지 히터를 통해 피시술자의 기호에 맞는 온도를 설정하여 시술 시 지연 시간 없이 온수 세발 가능하도록 온도센서를 통하여 확인한 결과 수온유지($38^{\circ}C$)가 일정하게 유지되었다. 그리고 오존수 변환장치 설치로 자체 살균(1PPM) 및 정화 기능까지 가능한 장치의 효용성을 알 수 있었다. 오존수를 20분 정도 측정한 결과 오존 농도가 1PPM 이하로 측정되어 안정성을 확보하였다. 최종적으로 오존수를 20분 정도 측정한 결과 오존 농도가 1PPM 이하로 측정되어 안정성을 확보하였고, 온수장치와 오존수 변환장치와 함께 이동 샴푸대의 모든 부분이 사용자가 사용하기에 불편함이 없도록 설계 하였다.