• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.33 no.1
• /
• pp.13-22
• /
• 2013

This paper deals with a novel method for numerical analyses of the tapered geometrical non-linear beam with three unknown parameters, subjected a floating point load. The beams with hinged-movable end constraint are chosen as the objective beam. Cross sections of the beam whose flexural rigidities are functionally varied with the axial coordinate. The first order simultaneous differential equations governing the elastica of such beam are derived on the basis of the Bernoulli-Euler beam theory. A novel numerical method for solving these equations is developed by using the iteration technique. The processes of the solution method are extensively discussed through a typical numerical example. For validating theories developed herein, laboratory scaled experiments are conducted.

• Journal of Korea Water Resources Association
• /
• v.49 no.6
• /
• pp.529-536
• /
• 2016

The existing methods to estimate the maximum scour depth in the bend of steep gravel bed channel have been evaluated by the hydraulic movable-bed experiments. In the $90^{\circ}$ bend steep-slope channel paved with the fluvial gravels which are uniform in size and have a mean diameter of 43mm, the maximum scour depths due to the flow discharge and the gradient of bed slope have been investigated and compared with the scour depth computed from the equations. The local scour has occurred in conditions that the bed slope is steeper than 0.02 and the $F_r$ is greater than 0.95. Except Lacey's equation and Zeller's equation, the existing methods computing the maximum scour depth overestimate the maximum scour depth in the steep channel with the very coarse gravel bed. However, Lacey's equation with the bed material size and Zeller's equation considering the approach channel gradient and the bend angle may be relatively used to estimate the scour depth in bend of the steep gravel-bed river.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.39 no.7
• /
• pp.687-692
• /
• 2015

A mold design for in-mold coating was developed to achieve simultaneous coating and injection molding of an automotive armrest. The developed mold includes one core and two cavities which are composed of a substrate cavity and a coating cavity. The core was attached to a movable plate and two cavities were mounted on a plate sliding in a stationary plate. In a two-step process, the part was first injection molded and subsequently, with the aid of a sliding table, was transferred to a second cavity. The materials used were PC/ABS for substrate and two-component polyurethane for coating. The experiments were conducted by changing the flow rate to investigate mixing characteristics. As the flow rate increased, the mixing improved. Additionally, the bubbles appeared over the substrate surface decreased with an increase of the weight of injected coating material.

• Parasites, Hosts and Diseases
• /
• v.52 no.2
• /
• pp.193-196
• /
• 2014

Fascioliasis is a zoonotic infection caused by Fasciola hepatica or Fasciola gigantica. We report an 87-year-old Korean male patient with postprandial abdominal pain and discomfort due to F. hepatica infection who was diagnosed and managed by endoscopic retrograde cholangiopancreatography (ERCP) with extraction of 2 worms. At his first visit to the hospital, a gallbladder stone was suspected. CT and magnetic retrograde cholangiopancreatography (MRCP) showed an intraductal mass in the common bile duct (CBD) without proximal duct dilatation. Based on radiological findings, the presumed diagnosis was intraductal cholangiocarcinoma. However, in ERCP which was performed for biliary decompression and tissue diagnosis, movable materials were detected in the CBD. Using a basket, 2 living leaf-like parasites were removed. The worms were morphologically compatible with F. hepatica. To rule out the possibility of the worms to be another morphologically close species, in particular F. gigantica, 1 specimen was processed for genetic analysis of its ITS-1 region. The results showed that the present worms were genetically identical (100%) with F. hepatica but different from F. gigantica.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2014

The purpose of this study was to compare and analyze kinetic variables of lower limbs according to types of ankle taping in drop landing. For this, targeting seven male basketball players (average age: $20.8{\pm}0.74yrs$, average height: $187.4{\pm}3.92cm$, average weight: $79.8{\pm}7.62kg$) with no instability of ankle joints, the drop landing motion was conducted according to three types of inelastic taping (C-type), elastic taping (K-type), and no treatment (N-taping). Based on the result, the next conclusion was reached. First, the effect of taping for the players with stable ankles was minimal and the high load on ankle joints offset the fixing effect of inelastic taping. Thus the inelastic taping for the players with stable ankles did not have an effect on the control of dorsal flexion during one-foot landing. Second, increasing angular velocity by increasing the movable range of knee joints disperses impact forces, yet inelastic taping restricted the range of knee joint motion and at the same time increased angular velocity, adding to a negative effect on knee joints. Third, inelastic taping induced inefficient motion of Lower limbs and unstable impact force control of ankle joints at the moment of landing and produced maximum vertical ground reaction force, which led to an increase of load. Therefore, inelastic ankle taping of players whose jump actions occur very often should be reconsidered. Also, it is thought that this study has a great meaning in proving the problem of inelastic taping related to knee pain with unknown causes.

• Fire Science and Engineering
• /
• v.33 no.6
• /
• pp.173-180
• /
• 2019

Oil tank fires need to be suppressed differently from other oil-related fires, due to the high-temperature flames and hot updraft above the tank, in the former case, that cause the destruction of large amounts of foam. We studied high-capacity foam discharge systems based on the standards of the American Petroleum Institute (API), National Fire Protection Association (NFPA), British Standard European Norm (BS EN), and the laws of Japan. The performance of a high-capacity foam discharge system was measured by conducting real fire experiments with model oil tanks. We concluded that lightweight and easily movable high-capacity foam discharge systems should be urgently introduced in domestic operations. Additionally, the obstacles faced by major tanks, such as long-distance installation of large-diameter fire hoses and narrowing of firefighting spaces, should be resolved depending on the conditions of the site.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.12 no.3
• /
• pp.34-41
• /
• 1990

The pilomatricoma (calcifying epithelioma of Malherbe) is rare benign hard, spherical and freely movable cutaneous tumor, which was differentiated from hair cells, particulary hair cortex cells. It is usually occured as a single, asymptomatic, 0.5 cm to 3.0 cm sized, deep seated, firm nodule, covered by normal or pink skin. It arises chiefly in young people, including children, and most often in the head, neck and upper extrimites. The authers experienced a case of pilomatricoma which occured in preauricular region. This case was summarized as follows. 1. 10 years old female has suffered from hard subepidermal mass on preauricular area and she visited our out patient clinic. So we performed surgical extirpation and the excised specimen was pathologically examined. 2. Grossly the tumor measures 2.0 cm in diameter and firm, bosselated, spherical shaped which covered by a thin layer of fibrous tissue. On cut section, it shows spicular gritty surfaces, well encapsulation, interwoven and keratotic lamellae. 3. Histopathologically, the epithelial masses of the tumor are composed of two type of cells, basophilic cells and shodow cells. The basophilic cells resemble hair matrix cells which posses round or elogated, deeply basophilic nuclei and scanty cytoplasm. The shadow cells show a central, unstained shadow at the site of the lost nucleus. Gradual development of basophilic cells into shadow cells can be observed. Foci of calcification are present within the lobule of shadow cells. The stroma of the tumor shows a considerable foreign body giant cell reaction adjacent to the shadow cells. 4. No recurrence was observed until post-operative 40 months.

• Journal of agricultural medicine and community health
• /
• v.20 no.2
• /
• pp.169-174
• /
• 1995

The case was described of a 31 year old female who developed fusiform swelling of the right third finger at the site of puncture by sea urchin spine. We observed a radiopaque linear material suggesting a remnant spine which the size was 2.4 mm in sonography and mammography. We confirmed that it exhibits a urchin spine and distinct caseous necrosis with central calcification. Sea urchins(Echinoidea) are ubiquitous marine creatures that resemble pincushions and are covered by calcareous skeletons surrounded by numerous movable calcium carbonate spines. The sharp spines are brittle and easily detach when touched by the victim. Contact with sea urchin spines produces intense pain, some localized erythema and edema. Inflammation develops in response to retained fragments. Granulomas 1-5 mm in diameter develop rarely 2-12 months after envenomation. In treatment, hot water immersion and thorough wound cleansing are advisable. Analgesics may, be necessary after hot water immersion. Attempts to remove these spines should be performed with good lighting sources, preferably with radiological direction. Chronic granulomas usually require complete excision. Acetone has been suggested for rapid resolution of pain. No antidotes are available.

• Journal of Veterinary Clinics
• /
• v.37 no.3
• /
• pp.163-167
• /
• 2020

A 13-month-old, 3.3 kg castrated male Shih-tzu presented with right hindlimb lameness. The physical examination revealed atrophy of the right thigh muscles, hyperextension of the stifle joint and external torsion of the tibia. On the radiographic examination, patella alta and genu recurvatum were observed. A biapical deformity of the tibia and external torsion of the distal tibia were detected by computed tomography (CT). A three-dimensional (3D) printed bone model was designed and constructed for the preoperative plan prior to surgery. Rectus femoris muscle transposition, femoral shortening ostectomy and open wedge osteotomy of the distal tibia were performed using hybrid external skele/t0al fixation (hybrid-ESF). A dynamic stifle flexion apparatus was used to prevent recurrence of a quadriceps contracture (QC). Intense physiotherapy was administered postoperatively. The dog began to use the affected limb one week after surgery. Functional improvement in the affected limb was observed, and full weight-bearing was possible at 3 months after surgery. Union of the osteotomy lines was observed at 3 months, and the stifle joint was fully movable at 7 months after surgery. Regarding the treatments for QC, these methods may be excellent candidates, as they do not lead to severe damage to the limb or amputation.

• Water for future
• /
• v.28 no.1
• /
• pp.107-120
• /
• 1995

This study is concerned with the hydraulic experiments of Modi Khola Hydroelectric in Nepal. The experimental domain consists of the intake structure and the settling basin. The intake structure was made by the undistorted model with the scale of 1:20, the settling basin by the distorted model with the scale of 1:10(vertical) and 1:15(horizontal). Based on the movable bed model theory, the 'Anthracite'($\rho_s$ =1.48) is chosen as a model material. According to the model tests, the installation of the guide wall with proper height and the proper control of the flushing gate are required for the effective flushing in the intake structure. In the settling basin a more proper design of the inlet in order to constrain the turbulence flow is required for an efficient sedimentation and the installation of another flushing pipe near the maximum sedimental area is required. Since the trap efficiency is measured about 95%, it is concluded that the design of the settling basin is proper.