• Journal of Multimedia Information System
• /
• v.7 no.4
• /
• pp.269-276
• /
• 2020

The small craft including jet-board for leisure are commonly smaller than the general commercial vessels. For the floating vessel, the motion analysis is significantly important component to design the shape. It is, however, hardly predicting its behavior by using conventional boundary element method due to violating small amplitude assumption for potential theory. The computational fluid dynamics method can afford to simulate such small craft, but its grid system was not able to calculate motion, because movable body disturbs the grid system by confliction. The dynamics fluid body interaction model with over-set mesh system can be dealt with movable floating body under irregular ocean wave. In this study, several cases were considered to reveal that DFBI is essential method to predict floating body motion. The single phase simulate was conducted to establish the shape perfection, and then the validated vessel was simulated with ocean waves weather DFBI option on or off. Through the comparison, the results between the cases of DFBI on and off shows significantly difference. It was claimed that the DFBI was necessary not only to calculation body motion, but also to predict accurate drag and lift force on the floating body for small size craft.

• Smart Structures and Systems
• /
• v.29 no.5
• /
• pp.705-714
• /
• 2022

In this paper, the effect of magnetic field on the vibration behavior of a Magnetorheological elastomer (MRE) sandwich MEMS actuated by electrostatic actuation with conductive skins are examined within the multiple scales (MMS) perturbation method. Magnetorheological smart materials have been widely used in vibration control of various systems due to their mechanical properties change under the influence of different magnetic fields. To investigate the vibrational behavior of the movable electrode, the Euler-Bernoulli beam theory, as well as Hamilton's principle is used to derive the equations and the related boundary conditions governing the dynamic behavior of the system are applied. The results of this study show that by placing the Magnetorheological elastomer core in the movable electrode and applying different magnetic fields on it, its natural vibrational frequency can be affected so that by increasing the applied magnetic field, the system's natural frequency increases. Also, the effect of various factors such as the electric potential difference between two electrodes, changes in the thickness of the core and the skins, electrode length, the distance between two electrodes and also change in vibration modes of the system on natural frequencies have been investigated.

• Journal of Korean Library and Information Science Society
• /
• v.50 no.4
• /
• pp.305-337
• /
• 2019

The aim of this thesis is to explore some aspects and characteristics of 109 volumes of collections of works at Uiryeong area in Gyeongsangnam-do Province. The author analyzed type of printing, type of collections of works, their birth year and the family name of the author, the place and the year, and the publisher of the publication of these different 109 kinds of the collections of works. The results are as follows: The collections of works demonstrate their forefathers' academic competencies. The types of printings were divided into 4 types, wood block printing, wooden movable-type printing, new lead-type printing, lithography printing. Of the collections of works 48% were wooden movable-type printing. The types of collections of works were divided into 3 types, Munjip(文集), Yujip(遺集), and Silgi(實記). Of the collections of works 49% were Munjip. The authors were local intellectuals. Of these authors 67% of authors were born in the 19th century. Twenty nine lineage groups published collections of works at Uiryeong area. 90% of the publications were published in the 20th century. In terms of place, 81% of the collections of works were published in the worshipping halls for their ancestors. 63% of the collections of works were published within 50 years after the author had died.

• Journal of the Korean Society of Radiology
• /
• v.14 no.4
• /
• pp.425-431
• /
• 2020

When a radiation generating device is installed in an export container due to COVID-19, the purpose of this study was to measure the space dose in the radiation room and to study the effectiveness of the shielding wall in the laboratory. Air dose measurement method was set behind the X-ray tube, 50 cm, 100 cm, 200 cm, and measured 12 locations. The dose values before and after the use of the movable radiation shielding wall were compared by measuring 3 locations behind the X-ray tube using the movable radiation shielding wall. The measured values were 50 cm on the left behind the X-ray tube: 1.446 μSv, behind the X-ray tube: 0.545 μSv, and 50 cm on the right behind the X-ray tube: 1.466 μSv. Measurements behind the radiation barrier were 0.190 μSv, 0.204 μSv, and 0.191 μSv. As a result of performing the corresponding sample t test of the average value according to the use of movable barrier walls, p <0.001 was found. As a result of the actual measurement, the medical exposure of the examiner due to the shielding wall in the laboratory decreased to 82.3%. In order to reduce occupational exposure in screening radiological laboratories, it is recommended that sufficient separation from radiation sources and the use of shielding walls are recommended.

• Tuberculosis and Respiratory Diseases
• /
• v.46 no.1
• /
• pp.129-135
• /
• 1999

We describe unusual manifestations of congenital cystic adenomatoid malformation (C.C.A.M.) of the lung, such as movable fungal ball-like intracystic blood clots and hemoptysis, which were detected in previously healthy 23 years-old woman. We identified blood clots only after left upper lobectomy and could not distinguish from fungal ball with radiographic methods. CCAM of the lung, rare and lethal form of congenital pulmonary cystic disease, was initially introduced by Ch, in and Tang in 1949. The histogenesis of this lesion is characterized by polypoid glandular tissue proliferation and overgrowth of mesenchymal elements due to cessation of bronchiolar maturation which occurred in after 16weeks intrauterine period. In 80-95% of reported cases, the lesion was confined to a single lobe and there was no lobe and right and left lung predilection The clinical presentation may be widely variable, ranging from intrauterine fetal death to late discovery in childhood with recurrent pulmonary infection. But there,s no reports which were misdiagnosed with intracystic fungal ball. The treatment choice is lobectomy of affected lobe. There,s a few case reports with rhabdomyosarcoma, bronchiolar cell carcinoma and myxosarcoma arising in CCAM patients. Therefore, early resection is recommended even if asymtomatic cases. We experienced a rare case of CCAM of the lung in 23 years old female, and there were intracystic fungal ball-like movable blood clots in lower portion of left lung. After left upper lobectomy was performed, now she is discharged and followed up without any complications.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.480-480
• /
• 2008

Vacuum circuit breaker(VCB) is now emerging as an alternative of gas circuit breaker(GCB) which uses SF6 gas as insulating material whose dielectric strength is outstanding. But we have to reduce SF6 gas because SF6 gas is one of greenhouse gas and efforts to reduce greenhouse gas are now trend of the world. Therefore, we can say VCB is the optimal alternative of GCB because vacuum is environmentally friendly. The vacuum interrupter is the core part of VCB to interrupt arcing current. There are mainly two methods to extinguish arc. One is radial magnetic field (RMF) method and the other is axial magnetic field (AMF) method. We deals with RMF method in this paper. Compared with AMP, RMF arc quenching method has different principle to extinguish arc. In case of RMF method, pinch effect is much larger than AMF method. Because of pinch effect RMF type contact electrodes have the single large spot which is severly damaged and melted while AMF type contact electrodes have small and multiple spots which are slightly damaged and melted. To prevent contact electrode being damaged and melted from high temperature-arc, RMF method uses Lorentz force to move arc. In this paper we calculated and compared the arc driving force of two cases and we analyzed the force acting on each part of arc by means of commercial finite element method software Maxwell 3D. They have 3petals and we considered two cases. One is the case when fixed(upper) and movable(lower) contacts are in mirror arrangement (Case 1). The other is the case when one of two contacts (movable contact) is revolved at maximum angle as possible as it can be (Case 2). And at each case above, we analyzed arc driving force at two positions, position 1 is the closest to the center of contact and position 2 is near the edge of petal on fixed contact. As a result we could find that Case 2 generated stronger arc driving force than Case 1 at position 1. But at position 2 Case 1 generated stronger arc driving force than Case 2. This simulation method can contribute to optimizing spiral-type electrode designs in a view of arc driving force.

• Journal of Korea Water Resources Association
• /
• v.51 no.9
• /
• pp.795-802
• /
• 2018

This study investigates the hydraulic characteristics and the delta development processes in the improved-pneumatic-movable weir by considering the standing angle of the weir through laboratory experiments. The delta migration speed decreases rapidly with time. As the ratio of delta height to water depth increases, the dimensionless delta migration speed decreases at the delta point. Therefore, the water depth decreases as the delta height increases. Although the delta volume is large due to the effective height of the delta, the delta migration speed and sediment deposition decreases because of the backwater effect on the delta. On the same bed slope condition, the larger the weir height, the larger the delta volume and the ratio of delta height to delta front length is close to 1.0. The delta development could be suppressed when the weir is high. Therefore, the condition that the weir is high has the suppressing effect on the delta developments.

• Journal of Korea Foundry Society
• /
• v.41 no.1
• /
• pp.16-25
• /
• 2021

The development of technology to prevent environmental pollutants and reduce energy consumption has already become a very significant issue not only for the foundry industry but also for society as a whole. In this paper, we introduce a new dust collector developed for low energy consumption and high performance compared to a roof top dust collector. The roof top dust collector which is using widely in the domestic foundry plant has a low performance about the dust suction ability in spite of high energy consumption because it is installed in a high place to collect the whole dust from all processes in foundry. A dust collector away from dust sources inevitably has low energy efficiency. The development of an efficient collector for foundry is very difficult because the position of the dust source continues to change from the melting process to the pouring process. New dust collector is installed on the ladle transfer equipment such as cranes, hoists, and monorails to effectively respond to moving dust sources. The movable device, attached close to the source of dust, provides high performance even with low energy consumption. The new dust collector is expected to be an environment-friendly device that can be applied to the foundry.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.12
• /
• pp.77-86
• /
• 2020

Power quality problems caused by feeder voltage drop and extension construction cost problems can occur with the increasing utilization rates of the existing fixed-type EV (electric vehicle) charger. Moreover, EV users might not be able to access the EV charger due to a lack of EV charging facilities. Therefore, this paper proposes an MPSD (movable power supply device) for EVs to overcome user inconvenience caused by the insufficient number of chargers and extension cost issues. The proposed MPSD was mainly composed of a PV (photovoltaic) system, ESS (energy storage system), EV charging system, and monitoring and control system. Furthermore, there are three operation modes available to enhance the flexibility of the MPSD application, depending on the situation. This paper also presents an economical evaluation modeling using the present worth method to consider the cost and benefit elements. The simulation results based on proposed modeling showed that MPSD is more economical than the existing EV charger. Moreover, its profit can be increased significantly depending on the distance to the installation point.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1696-1699
• /
• 1997

The robot mainpulator for inspection of pressurizer in the nuclear power plant has been developed, which consists of four parts : 2 arms, movable gripper, base frame, contorl console. To extract the damaged electric heating rod inside pressurizer, the gripper has been developed using wire lope and self-locking mechanism. for the examination of the structural stability of the robot manipulator, stress analysis is performed by using the ANSYS code.