• 한국ITS학회:학술대회논문집
• /
• 한국ITS학회 2005년도 제4회 추계학술대회 및 정기총회
• /
• pp.83-88
• /
• 2005

A transportation problem in Korea is a serious issue that has to be solved urgently in the motor era of 15 million vehicles. Recently ITS has been introduced to improve efficiency of the current roads because an excessive budget and a long term construction are needed to build new roads. Therefore the government enacted the law as of ITS and the in architecture. However, these ITS information services were oriented to mainly vehicles and drivers, not public entities such as bus driver, passengers and so on. Nowadays lots of local autonomous city introduced a public transportation information system (PTIS), and providing useful information for the public. For this PTIS, important design issues are to be focused on detecting and tracking technology of moving bus, and a wireless communication link to transmit the location information. This paper presents design models using several wireless communication methods, and an implementation case using a Wireless packet Data communication Network (WDN) to transmit bus location information at Seoul, Korea.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.248-250
• /
• 2005

This paper suggests a new type of 4-switch inverter for switched reluctance motor drives. 4-switch Inverter topology is studied to provide possibility for the realization of cost of 3-phase SRM drive system. We used Y-connection and two-phase exciting method. For effective utilization of the developed system, a direct current controlled PWM scheme is designed and implemented to produce the desired dynamic. We solve to balance the neutral point of Y-connection by the direct current controlled PWM and examine the performance of proposed system. With the algorithm and developed control scheme, is expected that the proposed system can be widely used in commercial applications with a reduced system cost.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2005년도 전력전자학술대회 논문집
• /
• pp.4-7
• /
• 2005

본 논문에서는 역기전력을 고려한 새로운 토크모델인 CDTP(Commutation Delay Time and Point) 제어기법을 이용하여 실제 역기전력을 고려한 BLDC(Brushless DC)전동기의 토크맥동에 대하여 연구하였다. BLCD 전공기의 상전환(Commutation)시 발생하는 토크맥동에 대하여 기술하였으며 토크맥동의 원인이 되는 역기전력과 전류와의 관계를 고찰하였다. 이를 바탕으로 토크맥동의 개선을 위하여 상전환시점과 상전환기간을 고려한 CDTP 제어기법을 제안하였으며 맥동토크의 저감효과에 대하여 해석하였다. 또한 BLDC 전동기의 실제 역기전력을 고려하기 위하여 Hague의 해석방법에 따른 역기전력의 다양한 형태를 살펴보고, 제안한 CDTP기법을 적용하여 기존 방법을 통한 토크맥동 제어방법과 비교 ${\cdot}$ 검토하였다. 이의 검증을 위하여 MATLAB/Simulink를 이용하여 제안한 방식의 토크맥동 저감방법의 타당성을 살펴보았다.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.94-103
• /
• 2013

A capacitor deterioration of LCL-filter grid-connected PWM converters is progressed by the self-healing mechanism. It leads to the degradation of the filter performance and drop of power factor. Thus, it is required to diagnose fault-point of capacitors and determine the replacement time. Typically, the fault of capacitors is determined when the capacitance is reduced up to 80% from initial value. This paper proposes algorithm to the determine capacitor replacement time of an LCL filter. The algorithm takes the advantage of change of the response on the injected resonant frequency corresponding to 80% value from the initial capacitance. The results of the algorithm are demonstrated through simulations and experiments.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1995년도 하계학술대회 논문집 B
• /
• pp.568-570
• /
• 1995

Nowdays, voltage stability is well recognized as an important problem. It is well known that voltage stability is influenced by the characteristics of load. Up to present,voltage stability researches were done by the static load modeling, but it is needed that the precise analysis by the view point of dynamic load modeling. In this paper, with induction motor as dynamic load, using modal performance measure, optimal value of tcsc is determined.

• 한국초전도저온공학회:학술대회논문집
• /
• 한국초전도저온공학회 2003년도 추계학술대회 논문집
• /
• pp.316-319
• /
• 2003

Cryogenic refrigerator system is necessary for cooling the superconducting rotor. Among the various cryogenic refrigerator systems, on-board hybrid pulse tube cryocooler is designed for cooling the superconducting rotor. Hybrid pulse tube cryocooler is composed of pulse tube cryocooler and Stirling cryocooler. This Stirling cryocooler precools the middle point of regenerator to obtain lower temperature at cold part of pulse tube cryocooler. In this paper, only Stirling cryocooler is on-boarded then rotated by motor for various rotating speeds and heat loads at cold part of Stilting cryocooler. Through this experiment the feasibility of the on-board cryocooler is investigated.

• 혜화의학회지
• /
• 제9권1호
• /
• pp.259-266
• /
• 2000

Facial nerve is subject to injury at any point in the course from the cerebral cortex to the motor end plate in the face, so many etiologic varieties of facial paralysis may be encountered, including trauma, viral infection and idiopathic. Author have reviewed the effect of electrodiagnostic test in Bell,s palsy. The electrodiagnostic test is helpful for estimating the prognosis of the Bell's palsy patient.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 2005년도 추계학술대회 논문집
• /
• pp.836-841
• /
• 2005

As gravel roadbed is gradually turn down by repetitive loading of train, lasting work for maintenance and management of track is necessary to reduce the settlement of roadbed and the deterioration of track. Despite of above weak point, gravel roadbed has become a basic structure of roadbed at the present time. But request for new structure of roadbed is recently presented to settle an increased transportation capacity of track, and to solve a shortage of the labor to handle maintenance work of track. Therefore, we begin to research about maintenance-free roadbed like paved track from two years ago. In this study, a series of tests were performed to clarify the characteristics of strength and permeability of concrete specimen, which is the upper part of paved track injected by cement mortar, by type of geotextile and finally to give a basic data for application of geotextile to the lower part of paved track.

• 반도체디스플레이기술학회지
• /
• 제10권1호
• /
• pp.83-89
• /
• 2011

In the case of the tracking system with an active camera, it is very difficult to guarantee real-time processing due to the attribute of vision system which handles large amounts of data at once and has time delay to process. The reliability of the processed result is also badly influenced by the slow sampling time and uncertainty caused by the image processing. In this paper, we figure out dynamic characteristics of pixels reflected on the image plane and derive the mathematical model of the vision tracking system which includes the actuating part and the image processing part. Based on this model, we find a controller that stabilizes the system and enhances the tracking performance to track a target rapidly. The centroid is used as the position index of moving object and the DC motor in the actuating part is controlled to keep the identified centroid at the center point of the image plane.

• 전기학회논문지
• /
• 제58권9호
• /
• pp.1741-1749
• /
• 2009

It is very important to maintain the balanced output voltage waveforms under the unbalanced DC-link voltages in the four-switch three-phase inverter(FSTPI). In this paper, the improvement of output voltage waveforms is proposed with the aid of DC-link voltage ripple estimation. The proposed method can be implemented without the additional voltage sensor. The proposed method applied to the permanent magnet synchronous motor (PMSM) is simulated and experimented in order to verify its feasibility.