• 제어로봇시스템학회:학술대회논문집
• /
• 2000.10a
• /
• pp.106-106
• /
• 2000

This study is to embody automatic inspection system of motor body panel by visual system. since it is inefficient to examine the adhesion condition of components with the naked eye, picture processing algorithm is presented to replace the existing manual inspection process with an automatic inspection process. The developed automatic inspection system presents the examination method of the adhesion condition of components with a ixed camera, which leads to an increase of the productivity and a reduction of manufacturing cost.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2002.04a
• /
• pp.146-148
• /
• 2002

An automatic inspection vision systems whose development was the industry applications motor rear side member. This system are connected to the 9 ea camera fur the process inspection the bolt, nuts, units in the rear side member product. This automatic inspection vision systems can perform inspection of not attached the bolt, nuts, units, etc fast and accuracy in react time fashion. And then perform very sophisticated inspection which human workers can not perform.

• Journal of Auto-vehicle Safety Association
• /
• v.8 no.4
• /
• pp.18-23
• /
• 2016

The objective of this study is to present the inspection standards of motorcycle brake system affecting motorcycle traffic accident. The inspection standards of motorcycle brake system recommended by CITA (International Motor Vehicle Inspection Committee) are studied. The brake performance for preventing the traffic accident is assessed by the brake efficiency. Considering the KMVSS (Korean Motor Vehicle Safety Standards) and the inspection standards of CITA, United Kingdom and Japan, the brake performance in the inspection standards of motorcycle is suggested. It is recommended that the efficiency of independent front and rear brakes are 40% and 27%, respectively. It is recommended that the efficiency of combined front and rear brakes is 50%.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.15 no.4
• /
• pp.60-66
• /
• 2016

This study used an ultrasound infrared thermography technique to detect issues in the motor core of typical power equipment. The current defect inspection method of the motor core is often incomplete (due to the limits of visual inspection) and thus the reliability of the motor core is reduced. Therefore, in this study, experiments were carried out to increase the reliability of the test by using an ultrasonic infrared thermal non-destructive inspection method to image the motor core. The ambient temperature of the experimental system was maintained at $25^{\circ}C$. Experiments were carried out to examine a damaged motor core and a defect-free motor core. Experimental results confirm the technique clearly detected defects in the motor core, thereby confirming the possibility of using this technique in the field.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.10a
• /
• pp.51-56
• /
• 2000

This study is to implement automatic inspection system of motor body panel by visual system. since it is inefficient to examine adhesion condition of components with the naked eye, image processing algorithm is presented to replace the existing manual inspection process with an automatic inspection process the developed automatic inspection system presents tile examination method of the adhesion condition of components with a pixed camera, which leads to an increase of the productivity and a reduction of manufacturing cost

• Journal of Korean Society for Quality Management
• /
• v.19 no.2
• /
• pp.63-77
• /
• 1991

Currently the problem of air pollution caused by the motor vehicle emission is one of the most serious problems to be solved. Thus we needed the inspection method and technical innovation constraining the motor vehicle emission. In order to establish the more reasonable certified test, the multivariate sequential rectifying inspection plan designed in this paper has been applied to the domestic vehicles by analyzing the statistic characteristics of the emission distribution. This inspection method is designed to satisfy the evaluation measure constraining domestic vehicle emission, and it serves the defect rectifying system and performance certification of catalytic converts. As the prior parameter for the domestic vehicles, we used the data for the catalytic converts which passed the certified test excuted by the EPK. For the case of engine test, we used those data which passed the certified test of domestic vehicles. The multivariate sequential rectifying inspection plan of the vector parameter is able to minimize the average sample number and increase the pass probability of operating characteristic curve.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.706-712
• /
• 2006

The present volume should address the unique method of deterioration analysis tailorly applicable to the study of traction motor, not existent maintenance works system with the time period standard, such as regular inspection works, maintenance works, selection for the repair works. The present volume has executed various field experiments in this method, should propose the procedures and baselines for anticipating the life expansion of traction motor and building precautional maintenance system for it, on the basis of these field experiments. The improvement scheme of traction motor maintenance system in the present volume should be to keep the out-of-order rate from unexpectedly soaring and make the cost-reduction effect through better maintenance work method.

• Journal of Advanced Marine Engineering and Technology
• /
• v.32 no.1
• /
• pp.175-183
• /
• 2008

In this paper, a new in-pipe inspection robot was developed for inspecting a large number of circular pipe insides of the sea plant, ships, and buildings. A new pressure generation system was devised to inspect circular pipes with different diameters and to move up and down slant or perpendicular slopes inside of the pipe. Also, a design method was analyzed to decide the capacity of driving motor for the robot if the mass and maximum velocity of the robot are identified. According to the design specification, a robot was developed and was tested to verify the performance of the pressure generation system. For tests, a control system was developed.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.22 no.1
• /
• pp.125-130
• /
• 2013

In this paper, in order to overcome shortcomings of manual inspection for the automotive PWM Shaft, we developed an automated inline inspection system. The automated inline inspection system consists of the work feeder unit, conveying unit, outer diameter check unit, run-out and roundness check unit, machine vision, defective separation unit and status alarm unit. We used the machine vision system for automatic inspection process and designed the inline systems for automatic feeding and selecting process. Also the repeated operation test was performed in order to verify the precision and reliability of the proposed automated inline inspection system.

• Journal of Advanced Marine Engineering and Technology
• /
• v.33 no.5
• /
• pp.662-671
• /
• 2009

In this paper, a robot was developed for in-pipe cleaning and inspecting a large number of circular in-pipes of sea plants, ships, and buildings. A pressure generation mechanism was devised to inspect circular in-pipes with different diameters and to move up and down slant or perpendicular slopes in-pipes. For inspection of the dark inner side of the pipe, a light system using LED which dissipats small electricity was developed. Also, a design method was analyzed to decide the capacity of driving motor for the robot when the mass and maximum velocity of the robot are identified. The robot developed based on the design specification, was tested to verify the performance of the pressure generation mechanism. In addition, a control system was developed for the test.