• The Journal of Korean Academy of Sensory Integration
• /
• v.3 no.1
• /
• pp.13-21
• /
• 2005

Objective : The purpose of this study was to investigate the correlation between hand dexterity and visual-motor skills of preschoolers. We searched for the correlation between two test results, which were the 9-Hole Peg Test performance time and the visual motor integration test(VMI) performance score. Then, we also compared the 9-Hole Peg Test performance times with the VMI performance scores according to sex and age. Method : The participants were fifty normal children ranging in age from four to six years living in Busan. We used two test methods which have high reliability and validity. One was the 9-Hole Peg Test to evaluate hand dexterity, and the other was the VMI to the evaluate visual-motor skills of these young children. Results : First, over the entire range of the participating children, there was a high correlation between the performance times from the 9-Hole Peg Test and the VMI performance scores(r=-.682). Second, there was not a statistically significant difference between the performance times from the 9-Hole Peg Test and the VMI scores according to sex. Third, there were significant differences between the hand dexterity and visual-motor skills according to the children's age(p<.001). Conclusion : This study proved that there is high correlation between hand dexterity and visual-motor skills of the preschooler. Occupational therapists in preschool service should consider that visual-motor skills need to be compatible with hand dexterity in both evaluation and therapy. In addition, hand dexterity and visual-motor skills improved according to advances in age, so we must give graded tasks to proper age groups through concrete analysis of activity. By doing this, children can get the better therapeutic effects.

• Transactions on Electrical and Electronic Materials
• /
• v.2 no.4
• /
• pp.19-23
• /
• 2001

In this paper, design considerations and manufacturing procedure of 200 class insulation system with polyimide(Kapton) main insulation and silicone resin VPI process on the traction motor thor EMU will be reviewed. The performance test and the long life evaluation test that prove stability and reliability of Insulation system for traction motor will also be introduced.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.31 no.2 s.257
• /
• pp.151-158
• /
• 2007

The mechanism of power transmission from motor torque to stem thrust and the operation characteristic of each stroke position are analyzed using the diagnostic signal, and effects of differential pressure on the performance of motor operated flexible wedge gate valve are investigated. Test facility consists of 76 mm motor operated valve(flexible wedge type), pump and pipe system. Static and dynamic test are performed separately, and two differential pressure conditions are applied in the dynamic test. To evaluate the performance of valve, test signals for the torque, thrust, current, voltage and stroke length are acquired by using UDS which is diagnosis device for motor operated valve, and each diagnostic signal is analyzed and compared. The characteristic of valve performance factors such as stem factor, rate of loading, valve factor, are evaluated, and these factors are found to be severely influenced by the fluid differential pressure.

• Journal of Korean Physical Therapy Science
• /
• v.7 no.1
• /
• pp.333-352
• /
• 2000

The objective of this study was to identify the effects of the cognitive performance of stroke patients on their motor function recovery after comprehensive rehabilitation management. The subjects of this study were 41 stroke in-patients of the Rehabilitation Hospital, College of Medicine, Yonsei University, hospitalized during the period from September 1, 1997 to May 5, 1998. The cognitive performance was measured using a Mini-Mental State Examination(MMSE) and the motor function recovery using Motor Assessment Scale(MAS). The data were analyzed by the paired t-test, independent t-test, a one way ANOVA, and Pearson's correlation coefficiency. The findings were as follows: 1. There was a significant difference found in the motor function recovery level after the comprehensive rehabilitation management. 2. There was no significant difference found in relation to sex, age, cause of stroke, laterality of paralysis and the level of spasticity. However, there was a big difference between pre- and post-treatment regarding the treatment period. 3. In line with the cognitive performance level, there was a significant difference found in the motor function recovery level after the comprehensive rehabilitation management. 4. The correlation between the elements of the cognitive performance and the motor recovery was found to be high in orientation, attention, calculation, and language. Those elements were expected to give larger effects on motor recovery after the comprehensive rehabilitation management. Based on this study, the cognitive performance level was found to play an important role in bringing effects on motor recovery after the comprehensive rehabilitation management of stroke patients. And the evaluation on the motor recovery based on quality would be also expected to be examined, as well as the cognitive performance level test accompanied by Intelligence Quality(IQ) test.

• Proceedings of the KIEE Conference
• /
• 2006.07b
• /
• pp.1103-1104
• /
• 2006

This paper is described about the test equipment of fraction motor for electric train. This test equipment was able to perform the performance test of traction motor which was operated in Korea. We explain performance and function of test equipment. In order to check the performance of test equipment, we conducted the performance test with 200 kW and 1100 kW traction motor.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.52 no.6
• /
• pp.286-290
• /
• 2003

The high temperature superconducting bulk can be used as the bearing of induction motors. This paper presents the fabrication and test results of an induction motor with superconducting bearings using HTS bulks. The bearing had eight hexahedron type YBCO bulks. Height, width and thickness of the HTS bulk were 30mm, 30mm and 10mm, respectively. Single phase induction motor was used to drive the shaft made of aluminum and the rotor of a conventional induction motor. To estimate the performance of the HTS bulk magnetic bearing, no load test, load test and Impact test were carried out. Load tests were performed by using air resistance caused by the shaft-mounted thin cylinder with buckets. Impact tests by axial direction and vertical direction impact showed that the vibration of the shaft gradually decayed. The induction motor with HTS bulk magnetic bearing rotated silently and smoothly throughout the tests. According to the test results, conventional bearings can be replaced with superconducting magnetic bearings made of HTS bulks.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2007.11a
• /
• pp.219-222
• /
• 2007

This research on 2nd stage solid rocket motor of KSLV-I for performance change was carried out. Solid rocket motor shall ignite on altitude of 300km. Solid Rocket Motor performed Static Firing Test and High Altitude Test for motor performance. A study made an analysis of specific impulse variation for nozzle ambient pressure.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.30 no.5 s.248
• /
• pp.609-614
• /
• 2006

Recently linear motor has been used mainly for high speed feeding performance of machine tools. The advantages of linear motor are not only high speed but high accuracy, because it is not required the coupling and ballscrew for converting rotary to liner motion. Before applying in different moving system, the dynamometer is necessary to test the performance. In Korea, the linear motor is producing in a couple of company However, the liner motor dynamometer is not commercialized yet, like as rotary motor dynamometer. In this paper, a linear motor dynamometer is designed and manufactured using a MR damper. The dynamometer system developed in this study could be used for testing the positioning accuracy fur different loading conditions, traction forces, dynamic performance and so on.

• Journal of Electrical Engineering and Technology
• /
• v.9 no.6
• /
• pp.1928-1934
• /
• 2014

Induction motors are widely used due to their rugged, robust and easy to care features. Since they are heavily used in industry, testing of three phase induction motors have play a vital role. In order to determine motor equivalent circuit parameters, efficiency of motor, squirrel caged laboratory sized an induction motor test setup is prepared. It is suitable for the induction motor with the frame size of 100 and 112. A virtual Instrumentation typed engineering workbench (called as LabVIEW) software packet, is utilized as a graphical user interface program. Motor input power is measured by measuring the input voltage, current and power factor with the help of hall effect typed voltage and current transformers. Also, the output power is measured by measuring the speed and torque with the help of an encoder and torque sensor. All outputs of the voltage and current transformer, encoder and temperature, torque sensors are given to the Data Acquisition Card (DAQ) which acquires the data for processing and then the equivalent circuit parameters, efficiency, performance and loading characteristics are found out, using LabVIEW based user interface. It is suggested to use this test rig for the quality control of produced motors in industry, and an educational experiment setup in the school laboratories.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2009.05a
• /
• pp.320-323
• /
• 2009

There is many considerations of the composition development of propellant, performance analysis according to temperature, ablation condition of heat-resistant material, etc. in the solid rocket motor development process. Performance analysis of the motor according to nozzle expansion ratio is one of this process and an important factor to decide the motor performance. A Study is verified through anlaysis, motor manufacture and test.