• Proceedings of the KIEE Conference
• /
• 1993.07b
• /
• pp.916-920
• /
• 1993

In this paper, the current characteristics of the system composed of R.L.C. load and series bridge inverter is investigated through the results of computer simulation and experiment to look for the good properties of A.C. motor driven by the above inverter. The time schedule of conventional bridge inverter and the parameters such as resistance and damping coefficient of load is changed for good results. It is possible to get the load current of similar sine wave under various conditions.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1160-1164
• /
• 2001

The input voltage of linear Induction motors(LIMs) is involved with the time harmonics because most LIM is driven by inverter. Therefore the equivalent circuit for an inverter-fed LIM has to be modifided to represent every harmonic present in supply voltage. This paper describes that the dynamic characteristic can be used effectively for analyzing the characteristics of a linear induction motor position and speed control.

• Proceedings of the KIEE Conference
• /
• 1997.11a
• /
• pp.52-54
• /
• 1997

This paper deals with investigating some characteristics of the inverter-driven tractive induction motor according to the various rotor slot number. 2-D time-stepped finite element method considering the inverter voltage waveform is utilized for electromagnetic field analysis. As a result, harmonics spectra of torque and bar loss are compared in each case.

• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.55 no.7
• /
• pp.373-379
• /
• 2006

The low-voltage induction motors have been widely driven by IGBT PWM inverters, ever since it was used to apply variable speed drives. Recently, the insulation failures of the stator windings become critical problems due to the high ratio of dv/dt in IGBT PWM inverters. In this paper, the detailed insulation tests on the IGBT PWM inverter fed induction motor are carried out. Five different types of insulation techniques are used to ti induction motors. The change of the insulation characteristics such as partial discharge, AC current, capacitance, and dissipation factor are compared. respectively In addition, insulation breakdown tests using the high voltage pulse are performed, and corresponding breakdown voltages are analyzed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.24 no.6
• /
• pp.34-42
• /
• 2000

In this paper conventional technique will be described, which can be used for the measuring various parameters of induction motor. This is followed by presenting some other, alternative, techniques. The two tests are described which are suitable to obtain the electrical parameters of symmetrical 1hp three-phase squirrel-cage induction motor. These are the blocked rotor test and no load test. By the application of these, it is possible to determine the parameters which are presented in the steady-state equivalent-circuit of determining an induction motor. One conventional method of determining the inertia of an induction motors is obtained by performing retardation tests. The angular rotor speed of the motor is monitored, following its disconnection from the stator supply. Since the inertia torque J dw/dt contains the inertia coefficient J and the friction and windage torque Bw contains the coefficient B, then J and B can be determined by performing retardation tests.

• Proceedings of the KIEE Conference
• /
• 1991.07a
• /
• pp.583-586
• /
• 1991

This paper presents a comprehensive study on the stability of several control schemes for the induction motor driven by current source inverters. A stator voltage-controlled current source inverter drive system without a speed sensor is investigated in order to find appropriate control schemes, which are primarily based on direct or, alternatively, indirect frequency control scheme. The overall control systems with either voltage control loop or current and voltage control loops provided in addition to each frequency control scheme are analyzed by utilizing the root locus method and simulated by computer to illustrate the validity of this analysis.

• Proceedings of the KIEE Conference
• /
• 1996.07a
• /
• pp.136-138
• /
• 1996

This paper deals with the torque characteristic of AFPM Brushless DC motor, which is driven by 3 phase inverter and with the effect of phase of input voltage to the output by varying the input voltage to the induced voltage in stator of motor. To accomplish this, a prototype AFPM Brushless DC Motor was produced and phase variation was detected by a set of photo interrupter. In this realized system. method to maximize the output torque depend on the speed of motor is presented.

• Proceedings of the KIPE Conference
• /
• 1997.07a
• /
• pp.141-147
• /
• 1997

The variable speed drive system of a electric motor is popular in industry due to its economical aspect and simplicity of implementation, comparing with a steam turbine or the other engine driven. For a large pumping load like a feedwater pump rated about or more than 20,000㎾, a synchronous motor could be primarily considered. In this paper, we studied the modelling of a variable speed drive system consisted with a load commutated inverter(LCI) and a brushless sailent pole rotor synchronous motor(SM) using MATLAB/SIMULINK. Simulation was performed with a small SM motor parameters.

• The Transactions of The Korean Institute of Electrical Engineers
• /
• v.56 no.7
• /
• pp.1231-1235
• /
• 2007

This paper presents the dynamic characteristics of a linear brushless dc (BLDC) motor with permanent magnet excitation for the precision conveyor according to the load condition. Dynamic performance of the linear BLDC motor driven with 6 step inverter such as thrust force and speed is simulated by finite element method coupling with external circuit and measured for the prototype motor. The results of finite element analysis are compared to the experimental results and verify reliability.

• Proceedings of the KIEE Conference
• /
• 2001.04a
• /
• pp.109-112
• /
• 2001

In this paper, the development of the prototype electric vehicle for golf car is described. A brushless dc (BLDC) motor is applied as a prime mover. The BLDC motor is coupled directly to the reduction and differential gear system. The output power of the motor is decided to 2.2Kw at 3000 rpm, which is a general value of the golf car on the market today. The motor is driven by the microprocessor-based 3-phase PWM inverter system. We introduce the performance and functions of the BLDC motor and it's control system.